Search
Catalog Publications
Publications starting with: M clear
Filters
total: 4907
displaying 1000 best results Help
Catalog Publications
Year 2020
-
Metoda lokalizowania sensorów IoT przy użyciu mobilnej stacji bazowej
PublicationW artykule opisano innowacyjną metodę lokalizowania obiektów dla potrzeb Internetu rzeczy (IoT). Przedstawiono matematyczną analizę metody. Opisano również wyniki kompleksowych badań symulacyjnych efektywności pracy zaproponowanej metody dla wybranych parametrów radiowej sieci sensorowej.
-
Metodologia badania skrzyni biegów z wykorzystaniem układu hydraulicznego jako hamowni
PublicationW artykule przedstawiono metodologię prowadzenia badań mechanicznej skrzyni biegów. Sposób prowadzenia pomiarów zaprezentowano na przykładzie badań wybranej przekładni. Przedstawiono i opisano różne konfiguracje stanowiska badawczego wykorzystującego układ hydrauliczny, który pełnił funkcję hamowni. Zawarto opis konstrukcji prototypowej przekładni będącej obiektem badań. Ponadto omówiono przykładowe charakterystyki uzyskane w ramach...
-
Metodyka oceny ryzyka środowiskowego gruntów zanieczyszczonych metalami ciężkimi
Publication -
Metodyka systematycznego przeglądu literatury w zakresie konkursów o nagrody jakości opartych na modelach doskonałości
PublicationModel doskonałości można zdefiniować jako zbiór zasad kompleksowej oceny organizacji , który często wykorzystywany jest jako podstawa konkursów jakości. Celem niniejszego referatu jest systematyczny przegląd literatury o tematyce konkursów jakości opartych na modelach doskonałości, szczególnie związanych z modelem EFQM – modelem europejskim. Podczas badań wykorzystano trzy bazy literaturowe dostępne na Politechnice Gdańskiej –...
-
Microbial acetylcholinesterase inhibitors for Alzheimer’s therapy: recent trends on extraction, detection, irradiation-assisted production improvement and nano-structured drug delivery
Publication -
Microbial Diversity in Deep-Subsurface Hot Brines of Northwest Poland: from Community Structure to Isolate Characteristics
Publication -
Microclimate in Rooms Equipped with Decentralized Façade Ventilation Device
Publication -
Microcrystalline Cellulose Management in the Production of Poly(ether-urethane)s- Structure, Morphology, and Thermal Characteristic
PublicationIn response to the demand of polymer industry for reducing the use of synthetic chemicals, eco-friendly materials are investigated. In the presented study, bio-based poly(ether-urethane)s were prepared by using microcrystalline cellulose (MCC) and polyether polyol and 1,3-propanediol derived from corn sugar. A step towards sustainability was taken by incorporating bio-based compounds and cellulose, consequently, bio-waste are utilized...
-
Microencapsulation of fish oil – determination of optimal wall material and encapsulation methodology
PublicationFor the first time, we present a meta-analysis of experimental and literature data to determine which microencapsulation methodology, and which wall material are best suited to protect fish oil. Our analysis covered a period of several decades of research (1984–2018). The analysis was conducted on 196 literature data-points, and 16 data-points determined experimentally for this publication. PLS regression was used to determine...
-
Microscale diamond protection for a ZnO coated fiber optic sensor
PublicationFiber optic sensors are widely used in environmental, biological and chemical sensing. Due to the demanding environmental conditions in which they can be used, there is a risk of damaging the sensor measurement head placed in the measuring field. Sensors using nanolayers deposited upon the fiber structure are particularly vulnerable to damage. A thin film placed on the surface of the fiber end-face can be prone to mechanical damage...
-
Microscopic Evaluation of Concrete Samples from Manholes Exposed on Hydrogen Sulphide
Publication -
Microscopic traffic simulation models for connected and automated vehicles (CAVs) – state-of-the-art
PublicationResearch on connected and automated vehicles (CAVs) has been gaining substantial momentum in recent years. However, thevast amount of literature sources results in a wide range of applied tools and datasets, assumed methodology to investigate thepotential impacts of future CAVs traffic, and, consequently, differences in the obtained findings. This limits the scope of theircomparability and applicability and calls for a proper standardization...
-
Microstructure and Mechanical Properties of Carboxylated Nitrile Butadiene Rubber/Epoxy/XNBR-grafted Halloysite Nanotubes Nanocomposites
PublicationThe effect of various amounts of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the cure characteristics, mechanical and swelling behavior of XNBR/epoxy compounds was experimentally and theoretically investigated. The morphology of the prepared XNBR/epoxy/XHNTs nanocomposites was imaged using scanning electron microscopy (SEM). The effects of various XNBR-grafted nanotubes on the damping...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
Publication -
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Microwave-assisted synthesis of a TiO2-CuO heterojunction with enhanced photocatalytic activity against tetracycline
PublicationA microwave method was used for the synthesis of TiO2-CuO oxide systems. A detailed investigation was made of the effect of the molar ratio of components (TiO2:CuO=9:1, 7:3, 5:5, 3:7, 1:9) on the crystalline structure and morphology. Transmission electron microscopy (TEM) confirmed the presence of octahedral and rod-shaped titania particles and sheet copper(II) oxide particles; moreover, HRTEM analysis indicated the presence of...
-
Między klasyką a awangardą. Szpital Morski na Oksywiu projektu Mariana Lalewicza
PublicationCelem artykułu jest ukazanie architektonicznego dziedzictwa Szpitala Morskiego w Gdyni, będącego inwestycją wojskową z początku lat 30. XX weku, a powstałego w biurze ważnego i cenionego architekta – Mariana Lalewicza. Ten zasłużony projektant, reprezentant klasycyzmu akademickiego, miał w swym dorobku m.in. kilka gdyńskich obiektów istotnych dla Polskiej Marynarki Wojennej. W 1930 r. podjął się wyzwania szczególnego, jakim była...
-
Między prawdą, a mitem – o kontrowersjach co do istnienia prawa cywilnego w Chinach dynastycznych
Publication -
Międzynarodowa konferencja IATUL Seminar 2019 „Organizacyjne i prawne aspekty Otwartej Nauki” / International IATUL Seminar 2019 "Organizing the Open Science Framework – Strategies and Legal Aspects”
PublicationIATUL Seminar 2019 was held in Gdańsk/Sopot, Poland (December 10-11th, 2019). The theme of the Seminar was „Organizing the Open Science Framework – Strategies and Legal Aspects”. The event was co-organized by Gdańsk University of Technology Library and International Association of University Libraries (IATUL). IATUL Seminar 2019 event attracted delegates, including directors and senior managers of university and research libraries...
-
Międzynarodowa Konferencja Naukowa w Katowicach: “Przyszłość badań naukowych w świetle prawa autorskiego, kodeksów etycznych naukowców oraz kryteriów ocen jakości badań”
Publication -
Mikrofiltrowany koncentrat soku brzozowego jako innowacyjny, trwały środek spożywczy o wysokiej wartości odżywczej
PublicationIntroduction. The forest environment becomes an increasingly popular place of obtaining raw materials, and one of the most promising product is birch sap. The market for bottled birch sap in Poland is monotonous, relying exclusively on pasteurized, acidified and sweetened drinks. A chance to change this situation is to develop a birch sap concentrate obtained by reverse osmosis. It has a sweet taste desired by consumers and particularly...
-
Mikrokapsułki polimerowe
Publication -
Military Organization Leader Competence
Publication -
Milky Sap of Greater Celandine (Chelidonium majus L.) and Anti-Viral Properties
PublicationThe milky juice of the greater celandine herb has been used in folk medicine and in homeopathy for treatment of viral warts for years. However, classical medicine fails to use properties of celandine herbs in treatment of diseases induced by papilloma viruses. Nevertheless, dermatological outpatient clinics are regularly visited by patients reporting efficacy of milky sap isolated from celandine herb in treatment of their own...
-
Mineral Composition and Antioxidant Potential of Coffee Beverages Depending on the Brewing Method
Publication -
Miniature reconfigurable antenna
PublicationThis work concerns the design of a miniature, low-profile reconfigurable antenna based on Huygens metamaterial sources for frequency f0 = 2.45 GHz. Two planar Huygens sources were designed consisting of near-field resonators. Sources are excited from a specially designed reconfigurable control system. Thanks to the two PIN diodes, the system can realize two cardioid radiation characteristics with...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to compensate them has been proposed....
-
Miniaturized methods of sample preparation
Publication -
Minimalizacja błędu estymaty położenia obiektu przez redukcję błędów radiowych pomiarów odległości
PublicationUtrzymująca się popularność modułu radiowego DWM1000 firmy DecaWave do zastosowań lokalizacyjnych przyczyniła się do przeprowadzenia analizy wpływu błędów radiowych pomiarów odległości na dokładność estymaty położenia lokalizowanego obiektu. W badaniach skupiono się na analizie błędów radiowych pomiarów odległości dla węzłów oddalonych od siebie w zakresie od kilkudziesięciu centymetrów do dziesięciu metrów. Ze względu na błąd...
-
Minimising the Churn Out of the Service by Using a Fairness Mechanism
PublicationThe paper proposes an algorithm of bandwidth distribution, ensuring fairness to end-users in computer networks. The proposed algorithm divides users into satisfied and unsatisfied users. It provides fairness in terms of quality of experience (QoE) for satisfied users and quality of service (QoS) for unsatisfied users. In this paper, we present detailed comparisons relevant to service providers to show the advantages of the proposed...
-
Minute and diverse in fossil sticky stuff: Tanytarsini (Diptera: Chironomidae) from early Eocene Indian Cambay amber
PublicationWe here present a pioneering systematic review of fossil dipterans of the tribe Tanytarsini (family Chironomidae) discovered in Indian amber from Cambay. The specimens examined belong to five species: Gujaratomyia miripes, Stempellina stebneri sp. nov., Stempellinella pollex sp. nov., Tanytarsus forfex sp. nov. and Tanytarsus ramus sp. nov., which are described. All species belong to the oldest known Tanytarsini and come from the...
-
„Mit założycielski” polityki zagranicznej Rosji
Publication -
Mitigation of Fake Data Content Poisoning Attacks in NDN via Blockchain
PublicationAbstract—Information-centric networks struggle with content poisoning attacks (CPAs), especially their stronger form called Fake Data CPA, in which an intruder publisher uploads content signed with stolen credentials. Following an existing graphinfection based approach leveraging the constrained time when stolen credentials are useful, we design a blockchain-based mitigation scheme for Named Data Networking architectures. We postulate...
-
Mitigation of Membrane Wetting by Applying a Low Temperature Membrane Distillation
Publication -
Mitigation of the Flow Maldistribution in Minichannel and Minigap Heat Exchangers by Introducing Threshold in the Manifolds
PublicationIn the present paper, a detailed numerical investigation has been carried out to analyze the flow maldistribution in 50 parallel rectangular cross-section (1 mm depth and 1 mm width) minichannels and minigap section (1 mm depth and 99 mm width) with rectangular/trapezoidal manifolds in Z-type flow configuration. The author carried out numerical investigation with various mass flowrates, namely 0.05 kg/s, 0.1 kg/s and 0.2 kg/s which...
-
Mitochondrial D-loop informative SNPs in identification of dog’s breed
Publication -
Mixed Convection in Lid-Driven “T” Shallow Cavity Heated From Bottom and Filled by Two Immiscible Fluids of Air and Al2O3-Water Nanofluid
Publication -
Mixed mechanical-metrological approach to quantify the fractographic damage in mechanical components subjected to cyclic loading
Publication -
Mleko i produkty mleczne jako potencjalne źródło enterotoksyn gronkowcowych
Publication -
MnxCo3-xO4 spinel oxides as efficient oxygen evolution reaction catalysts in alkaline media
PublicationThe design of efficient electrocatalysts for oxygen evolution reaction (OER) is an essential task in developing sustainable water splitting technology for the production of hydrogen. In this work, manganese cobalt spinel oxides with a general formula of MnxCo3-xO4 (x=0, 0.5, 1, 1.5, 2) were synthesised via a soft chemistry method. Non-equilibrium mixed powder compositions were produced, resulting in high electrocatalytic activity....
-
Mobile chromatographs and spectrometers for the analysis of chemical warfare agents
PublicationThis article describes the technological state of readiness regarding mobile chromatographs and spectrometers and their appiicability for the analysis of chemical warfare agents (CWAs), degradation products, simulants, and precursors.
-
Mobile Cloud computing architecture for massively parallelizablegeometric computation
PublicationCloud Computing is one of the most disruptive technologies of this century. This technology has been widely adopted in many areas of the society. In the field of manufacturing industry, it can be used to provide advantages in the execution of the complex geometric computation algorithms involved on CAD/CAM processes. The idea proposed in this research consists in outsourcing part of the load to be com- puted in the client machines...
-
Mobile Security: Threats and Best Practices
PublicationCommunicating mobile security threats and best practices has become a central objective due to the ongoing discovery of new vulnerabilities of mobile devices. To cope with this overarching issue, the goal of this paper is to identify and analyze existing threats and best practices in the domain of mobile security. To this extent, we conducted a literature review based on a set of keywords. The obtained results concern recognizable...
-
Model Based Monitoring of Dynamic Loads and Remaining Useful Life Prediction in Rolling Mills and Heavy Machinery
Publication -
Model funkcjonalny wpływu czynników na jakość produktu w branży piekarniczej
PublicationW artykule zostały przedstawione czynniki, które mają wpływ na jakość produktu w branży piekarniczej. Tym produktem jest pieczywo, a w szczególności chleb, który stanowi od 80% do 90% jego ogólnej produkcji. Autor wyodrębnił czynniki wpływające na jakość produktu i usystematyzował je, a następnie opisał. Podzielone one zostały na 3 grupy funkcjonujące w procesie produkcyjnym, a następnie na podgrupy. Podstawowe grupy czynników,...
-
Model of aeration system at biological wastewater treatment plant for control design purposes
PublicationThe wastewater treatment plant (WWTP) is a dynamic, very complex system, in which the most important control parameter is the dissolved oxygen (DO) con-centration. The air is supplied to biological WWTP by the aeration system. Aera-tion is an important and expensive activity in WWTP. The aeration of sewage ful-fils a twofold role. Firstly, oxygen is provided as the main component for biolog-ical processes. Secondly, it supports...
-
Model of Nutrient and Pesticide Outflow with Surface Water to Puck Bay (Southern Baltic Sea)
PublicationCoastal basins are particularly exposed to the adverse impact of anthropogenic stress. In many places, despite only the seasonal increase in the number of residents, progressive urbanization and associated changes in the catchment characteristics are noticeable. Puck Bay is part of the Gulf of Gdansk and belongs to the Baltic Sea. Although the area of Puck Bay is covered by the Natura 2000 Network, this has not saved it from eutrophication...
-
Model systemu zarządzania usługami według metodologii design-thinking
PublicationW literaturze przedmiotu brakuje jednoznacznych wskazań odnośnie decyzji o wyborze najbardziej odpowiedniego modelu projektowania usług, szczególnie w kontekście różnych uwarunkowań dla poszczególnych sektorów rynku. Opracowany algorytm umożliwia samodzielne rozwiązanie problemu doboru modelu wewnątrz organizacji, bez konieczności zatrudniania zewnętrznego specjalisty. Algorytm skierowany jest do organizacji w fazie przygotowawczej...
-
Model zaangażowania w relacji usługodawca-klient
PublicationW niniejszej monografii przedstawiono rozwiązania pozwalające lepiej zrozumieć złożoność relacji występujących pomiędzy usługodawcami a klientami oraz metody, które pozwalają tę wiedzę wykorzystać w doskonaleniu procesów organizacji usługowych. Monografia podejmuje problem kształtowania zaangażowania na styku usługodawca–klient jako wstępnego i koniecznego warunku rozwijania relacji w usługach. Opierając się na klasycznej drabinie...