Search
Repository Open Access
Filters
total: 16713
displaying 1000 best results Help
Catalog Publications
Year 2025
-
A Compact Tri-Band Omnidirectional Antenna Design for CubeSat Applications
PublicationThis paper presents a compact tri-band omnidirectional antenna designed for CubeSat applications, operating at UHF (0.755 GHz), L-band (1.25 GHz), and S-band (2.28–3.74 GHz). The antenna features a defected ground structure (DGS) and metallic vias, which enhance impedance matching and enable stable multi-band resonance while maintaining a small footprint of 0.26λ × 0.26λ × 0.013λ within a 1U CubeSat. Unlike conventional CubeSat...
-
A Miniaturized and High Optically Transparent Frequency Selective Surface for RF Shielding using Double-Glazed Glass Windows for Green Building Applications
PublicationThis research presents a miniaturized and high optically transparent (OT) frequency selective surface (FSS) for achieving RF shielding through glass window panels. The proposed FSS consists of a single-layered copper pattern sandwiched between two ordinary glass substrates to suppress the dual bands of sub-6 fifth generation (5G). In particular, the design effectively shields n65-downlink (2.1 GHz) and a portion of n78-band (3.5...
-
A Non-PCM-Based 2 × 2 MIMO Antenna Array With Low Radar Cross-Section Using Characteristic Mode Analysis
PublicationIn this paper, we introduced a 2×2 multiple-input-multiple-output (MIMO) antenna array using a non-polarization conversion metasurface (NPCM) with reduced radar cross section (RCS). To achieve a low RCS, a chess-board configuration is typically adopted. However, in conventional NPCM designs, subarrays with 180◦ phase shifts apart exhibit radiating modes at different resonance frequencies due to varied unit cell sizes and spacing....
-
A procedure for simulation-assisted identification of ultrasonic wave attenuation in heterogeneous materials and its application to the detection of fracture in concrete beams
PublicationIn this study, a novel procedure for identification of ultrasonic wave attenuation in heterogeneous materials based on signal energy was presented. The main objective was to develop a method for simple and robust determination of wave characteristics for further use in numerical modelling of ultrasonic wave propagation including attenuation of signals. Experimental investigations supported by numerical simulations were proposed...
-
A Review: Structural Shape and Stress Control Techniques and their Applications
PublicationThis review article presents prior studies on controlling shape and stress in flexible structures. The study offers a comprehensive survey of literature concerning the adjustment and regulation of shape, stress, or both in structures and emphasizes such control’s importance. The control of systems is classified into three primary classes: nodal movement control, axial force control, and controlling the two classes concurrently....
-
Activation of small molecules by ambiphilic NHC-stabilized phosphinoborenium cation: formation of boreniums with B–O–C, B–O–B, and B–O–P structural motifs
PublicationThe reactivity of the phosphinoborenium cation supported by a 1,3,4,5-tetramethylimidazolin-2-ylidene ligand toward small molecules was explored. The phosphinoborenium cation exhibited dual Lewis acid–base properties due to the presence of the Lewis acidic boron center and the Lewis basic phosphido ligand connected by a covalent bond. The reaction of the title cation with CO2 led to the insertion of a CO2 molecule into the P–B...
-
Active learning on stacked machine learning techniques for predicting compressive strength of alkali-activated ultra-high-performance concrete
PublicationConventional ultra-high performance concrete (UHPC) has excellent development potential. However, a significant quantity of CO2 is produced throughout the cement-making process, which is in contrary to the current worldwide trend of lowering emissions and conserving energy, thus restricting the further advancement of UHPC. Considering climate change and sustainability concerns, cementless, eco-friendly, alkali-activated UHPC (AA-UHPC)...
-
Agile Mindset, Technological vs. Non-technological Mindset, and Gender. Are They Related?
PublicationThis study examined the impact of gender on the relationship between employees' agile and non-agile mindsets and organisational agility. It also considers the tech and non-tech focus as a potential moderator. The initial sample of 209 knowledge workers andthe replication sampleof 401 knowledge workers were applied to analyse the above relations using OLS regression by SPSS PROCES. The results showed that the most critical factor...
-
Anterior prefrontal EEG theta activities indicate memory and executive functions in epilepsy patients
PublicationObjective: Cognitive deficits are one of the most debilitating comorbidities in epilepsy and other neurodegenerative, neuropsychiatric, and neurodevelopmental brain disorders. Current diagnostic and therapeutic options are limited and lack objective measures of the underlying neural activities. In this study, electrophysiological biomarkers that reflect cognitive functions in clinically validated batteries were determined to aid...
-
Anticancer drugs targeting topoisomerase II for antifungal treatment
PublicationFungal topoisomerase II (TopoII) has been identified as essential for viability. Thus, our research aimed to investigate the potential of fungal TopoII as a novel target for antifungal chemotherapy. We conducted studies on eleventh antitumor compounds targeting human topoisomerase II, either approved by the U.S. Food and Drug Administration (FDA) or currently under clinical trials to evaluate their potential for use in other therapeutic...
-
ASSESSMENT OF THE GREENNESS OF MOLECULARLY IMPRINTED POLYMERS USED IN SAMPLE PREPARATION
PublicationIt is now widely accepted that the incorporation of molecularly imprinted polymers (MIPs) into sample preparation techniques has enabled unprecedented selectivity performance of analytical methods for the determination of a wide range of analytes in biological, food and environmental samples. However, according to the Principles of Green Chemistry and the subsequent Principles of Green Sample Preparation, it is clear that MIPs...
-
Automatic Cleaning of Time Series Data in Rural Internet of Things Ecosystems That Use Nomadic Gateways
PublicationA serious limitation to the deployment of IoT solutions in rural areas may be the lack of available telecommunications infrastructure enabling the continuous collection of measurement data. A nomadic computing system, using a UAV carrying an on-board gateway, can handle this; it leads, however, to a number of technical challenges. One is the intermittent collection of data from ground sensors governed by weather conditions for...
-
BEZPIECZEŃSTWO DZIECI W CYBERPRZESTRZENI KLUCZOWE ZAGADNIENIA I PRZEPISY PRAWNE
PublicationBezpieczeństwo dzieci w cyberprzestrzeni kluczowe zagadnienia i przepisy prawneOpracowanie eksperckie Marcin Niedopytalski W dobie powszechnej cyfryzacji, kiedy dostęp do internetu stał się nieodłącznym elementem życia codziennego, kwestia bezpieczeństwa dzieci w sieci nabiera szczególnego znaczenia. Z jednej strony obserwujemy korzyści płynące z edukacji online, swobodnego dostępu do informacji...
-
Bistability and chaos in the discrete two-gene Andrecut-Kauffman model
PublicationWe conduct numerical analysis of the 2-dimensional discrete-time gene expression model originally introduced by Andrecut and Kauffman (Phys. Lett. A 367: 281–287, 2007). In contrast to the previous studies, we analyze the dynamics with different reaction rates α1 and α2 for each of the two genes under consideration. We explore bifurcation diagrams for the model with α1 varying in a wide range and α2 fixed. We detect chaotic dynamics...
-
Born Twice: The Role of Social Media in Identity Redefinition after Sudden Disability
PublicationFrom being attacked by a shark to being stricken by illness, people who acquire disabilities later in life have unique lived experiences. There is, however, a commonality that binds them: the loss of a former identity and a rebirth into another life. They may also struggle with self-acceptance as they shun societal stigmas and perceived deviance from cultural norms. Through a netnographic study, we examine how identities are redefined...
-
Calculations of Cross-Sections for Positron Scattering on Benzene
PublicationIn this work, we present a theoretical study on positron scattering by benzene molecules over a broad energy range (1–1000 eV). The aim of this work is to provide missing data from partial cross-sections for specific processes. In particular, calculations of cross-sections for direct ionization and electronic excitation were carried out for benzene molecules in the gas phase. An estimate for the cross-section for positronium formation...
-
Characteristics Mode Analysis and Excitation of Orthogonal Modes on a Single Substrate for Wideband IoT Applications in the Millimeter Wave Band
PublicationThis paper presents the design of a circularly polarized millimeter-wave (mm-wave) metasurface (MTS) antenna. The Characteristics Modes Analysis (CMA) is employed to examine various modes within the unit-cell design of the proposed metasurface. Based on a thorough analysis, two orthogonal TM modes with a broadside radiation pattern were identified. These modes were then simultaneously excited on a single substrate using simple...
-
Chemical composition and techno-functional properties of high-purity water-soluble keratein and its enzymatic hydrolysates
PublicationThis study compared the effectiveness of urea-containing and urea-free L-cysteine solutions in extracting high-quality feather keratin and evaluated commercial proteases for producing keratin-derived bioactive peptides. The urea-assisted extraction was crucial for achieving high structural integrity and yield of soluble keratin. The keratin isolate exhibited oil-holding capacity of 9.37 g/g, foaming capacity of up to 127 %, and...
-
Chemical insight into pros and cons of coffees from different regions
PublicationThe main aim of this work was to study the chemical composition of eighteen ground coffees from different countries and continents with regard to the content of hazardous substances as radioactive elements (40K, 226Ra, 228Ra, 234U, 238U and 137Cs), metals, including heavy metals, aluminum and some microelements (V, Cr, Mn, Fe, Co, Ni, Cu, Zn) as well as substances that have a positive effect on human health and well-being (polyphenols,...
-
CO2 capture through Direct-Contact Condensation in a spray ejector condenser aided by a cyclone or T-junction separators
PublicationThis dissertation explores the vital task of separating and purifying CO2 in post-combustion sections of gas power plants. It focuses on integrating spray or steam ejector condenser with cyclone or T-junction separators to enhance CO2 capture through direct-contact condensation (DCC). The study employs experimental, analytical, and numerical techniques to understand DCC mechanisms within SEC and optimize separator performance....
-
Company culture matters! Knowledge-driven companies' way to innovations and sustainability
PublicationCompanies today aim to adapt to rapidly changing business environments by acquiring knowledge, developing dynamic capabilities, fostering market innovations, and ensuring sustainability. Achieving these goals requires a supportive company culture aligned with its structure and strategy. This study proves the critical role of company culture in sustainability based on a sample of 496 Polish knowledge workers, using structural equation...
-
Control structures of Doubly-Fed Induction Generator connected to Current Source Converter
PublicationThe control of Doubly-Fed Induction Generator can be achieved through various techniques. At present, many works published in the literature show the application of Voltage Source Converter in conjunction with Doubly-Fed Induction Generator. Recently published articles rarely involve the operational characteristics and technical aspects of the Doubly-Fed Induction Generator - Current Source Converter systems. The dissertation presents...
-
Cost-Efficient Behavioral Modeling of Antennas by Means of Global Sensitivity Analysis and Dimensionality Reduction
PublicationComputational tools, particularly electromagnetic (EM) solvers, are now commonplace in antenna design. While ensuring reliability, EM simulations are time-consuming, leading to high costs associated with EM-driven procedures like parametric optimization or statistical design. Various techniques have been developed to address this issue, with surrogate modeling methods garnering particular attention due to their potential advantages....
-
Crisis Management in the Hospitality Industry Analyzed Through a Social Sustainability Focus on Male and Female Leadership Styles
PublicationHuman capital management's managerial practices during a crisis ensure the achievement of main strategic objectives and result in long-term values, such as organizational learning, resilience, innovation, and business flexibility. Therefore, this study considers the social sustainability perspective in the hospitality industry as a critical aspect of crisis management. It specifically...
-
Declarative ship arenas under favourable conditions
PublicationAccording to maritime regulations, a collision-avoidance action shall be taken at an “ample time” while strict interpretation of this term is ambiguous. Evasive manoeuvres, executed by marine navigators on a daily basis, are usually carried out well in advance, while the distance at which they decide to perform such a manoeuvre is mostly subjective and results, e.g., from the navigator's seagoing experience. A proper understanding...
-
Deep eutectic solvent enhances antibacterial activity of a modular lytic enzyme against Acinetobacter baumannii
PublicationIn this study, we evaluated the combined effect between MLE-15, a modular lytic enzyme composed of four building blocks, and reline, a natural deep eutectic solvent. The bioinformatic analysis allowed us to determine the spatial architecture of MLE-15, whose components were bactericidal peptide cecropin A connected via a flexible linker to the cell wall binding domain (CBD) of mesophilic 201ϕ2 − 1 endolysin and catalytic domain...
-
Deep eutectic solvent-induced coacervation in micellar solution of alkyl polyglucoside surfactant: Supramolecular solvent formation and application in food analysis
PublicationThe number of deep eutectic solvents were investigated to induce coacervation and cause phase separation in the micellar solution of the alkyl polyglucoside C8–C10. Three fatty acids were selected as hydrogen bond donors namely hexanoic acid, heptanoic acid, and octanoic acid, while quaternary ammonium salts and a monoterpenoid thymol were used as hydrogen bond acceptors to obtain deep eutectic solvents. The precursors of the deep...
-
Degradation of dicamba – a persistent herbicide - by combined application of formic acid and UV as an advanced reduction process
PublicationThe degradation of dicamba as a persistent herbicide was studied with the combined application of UV and formic acid (FA) as a novel advanced reduction process (ARP). The effects of key parameters of FA concentration, dissolved organic matter, and inorganic anions were studied. A 97 % degradation and 94 % dechlorination of dicamba were obtained through the combination of UV and FA (UV-FA) at a dicamba concentration of 0.023 mM...
-
Design and Validation of A 30 GHz 8×8 Slot Antenna Array with Ridge Waveguide Pins/Holes Layers
PublicationThis paper presents an 8×8-element slot antenna array optimized for 30 GHz band applications, achieving high gain, wide impedance bandwidth, and high efficiency. The array employs a pin/hole-based design, which enables a compact structure and reduces fabrication complexity and cost, as it eliminates the need for electrical contact between its three primary layers: the metal radiating slot plate, a sub-array cavity layer, and a...
-
Development of dual nozzle slurry extrusion 3D printer by integrating material extrusion and photopolymerization for the fabrication of engineered ceramics
PublicationThis research focuses on developing a dual-nozzle slurry-based extrusion 3D printer capable of fabricating intricate zirconia structures. The designed 3D printer combines material extrusion and photopolymerization technologies to improve material diversity, precision, and cost-effectiveness. The 3D printer design incorporates ultraviolet curing to instantly cure extruded zirconia slurry thereby, eliminating the need for a step-wise...
-
Diagnosis of marine internal combustion engines by means of rapidly variable temperature and composition of exhaust gas as an alternative or support for currently used diagnostic methods
PublicationThe article points out relevance of parametric diagnostics of ship engines and analyzes the state of research in this field. A method is proposed for diagnosing engine systems on the basis of rapidly variable exhaust temperature while measuring its composition. A method for determining diagnoser tools from the signal within one engine cycle and mathematical and statistical treatment of test results is presented. The products of...
-
Differential evolution-optimized gold nanorods for enhanced photothermal conversion
PublicationNoble metallic nanoparticles (NPs) have shown great potential in the field of sustainable energy. Gold nanorods (AuNRs), known for their size-dependent optical and electrical characteristics, are strong candidates for various applications, particularly in solar energy conversion. Additionally, AuNRs are well-established nanomaterials in precision medicine. In this paper, we optimize the shape and size of AuNRs to maximize light-to-heat...
-
Dynamic anaerobic digestion-based biorefineries for on-demand renewable energy and bioproducts in a circular bioeconomy
PublicationAnaerobic digestion (AD) is an important biotechnology for treating biodegrad- able residues and producing bioenergy, yet its full potential remains untapped. We investigate a two-phase AD system for biorefinery applications, producing valuable bioproducts, such as volatile fatty acids (VFAs) and biogas, from grass feedstock. We introduce a demand-driven operational approach to match mar- ket conditions, while minimising water...
-
Effects of aggregate crushing and strain rate on fracture in compressive concrete with a DEM-based breakage model
PublicationW tym artykule zbadano, w jaki sposób kruche kruszywa wpływają na mezoskopowe zachowanie dynamiczne betonu w warunkach jednoosiowego ściskania. Przeprowadzono obszerne dynamiczne obliczenia dwuwymiarowe (2D), aby zbadać wpływ kruszenia kruszywa i szybkości odkształcania na dynamiczną wytrzymałość betonu i wzory pęknięć. Wykorzystując model pękania oparty na DEM, beton symulowano jako materiał czterofazowy składający się z kruszywa,...
-
Efficacy of modal curvature damage detection in various pre-damage data assumptions and modal identification techniques
PublicationThe efficacy of modal curvature approach for damage localization is discussed in the paper in the context of input data. Three modal identification methods, i.e., Eigensystem Realization Algorithm (ERA), Natural Excitation Technique with ERA (NExT-ERA) and Covariance Driven Stochastic Subspace Identification (SSI-Cov), and four methods of determining baseline data, i.e., real measurement of the undamaged state, analytical function,...
-
Electrospun Fibers from Biobased and Recycled Materials for Indoor Air Quality Enhancement
PublicationAir filters are crucial components of building ventilation systems. Compared to conventional air filter media like glass fibers and melt-blown fibers, electrospinning membranes are more efficient for capturing various pollutants due to the smaller pores present on the structure. In this paper, activated carbon filters were prepared with eco-friendly polylactic acid (PLA) and microcrystalline cellulose (MCC) using electrospinning...
-
Enhanced Gain and Isolation Dual-Band Dual-Port MIMO Antenna with Integrated Lens for Millimeter-wave 5G Internet-of-Things Applications
PublicationThis paper proposes a dual-band dual-port Multiple Input Multiple Output (MIMO) antenna with enhanced gain and port isolation for 5G millimeter-wave (mm-wave) Internet of Things (IoT) applications. The gain enhancement is achieved using a 3D-printed dielectric lens integrated with the antenna, whereas port isolation is improved using a novel 2D compact metamaterial incorporated between the MIMO elements. The proposed integrated...
-
Enhanced sorption of inhibitory compounds from fermentation broth using a MOF@pseudo-DES composite
PublicationThe increase in biorefinery processes underscores the need for effective biofuel generation; nevertheless, inhibitors such as hydroquinone (HQ), 5-hydroxymethylfurfural (HMF), furfural (FF), and vanillin (VAN) resulting from biomass degradation impede microbial growth and process efficiency. Herein, a deep eutectic solvent (DES)-like substance was in-situ generated on the surface of NH2-UiO-66 via a post-synthetic coating process...
-
Evaluating oxide nanoparticle exsolution on A-site deficient PrBaCo2O6-δ electrodes
PublicationNanoparticle exsolution is a powerful technique for functionalizing redox oxides in energy applications, particularly at high temperatures. It shows promise for solid oxide fuel cells and electrolyzers. However, exsolution of other chemistries like metal oxides is not well studied, and the mechanism is poorly understood. This work explores oxide exsolution in PrBa1−xCo2O6−δ (x = 0, 0.05, 0.1, 0.15) double perovskites, practiced...
-
Evaluation of Damage and Nonlinearity of Cold Recycled Materials Mixtures Using a New Strain Sweep Testing Procedure
PublicationThis article describes a new strain sweep testing method to identify the effects of damage and reversible nonlinearity. Indirect tensile stiffness modulus tests were performed at increasing strain (up to 322 με) to evaluate the stiffness behavior with increasing damage; parallel tests at small strain (43 με) were performed to evaluate the linear behavior. Tests were carried out on two cement-bitumen–treated material (CBTM) mixtures...
-
Experimental study of the effect of seawater and temperature on the corrosion resistance of cement composites with the addition of copper post-flotation waste
PublicationThe presented results of the study concern the determination of corrosion resistance of cement composites with the copper post-flotation waste (PFW) as a cement substitute in the amounts of 2.5%, 5.0%, 7.5%, and 10%, exposed to seawater, depending on the temperature (10°C and 20°C). To better evaluate and understand the compressive strength, the hydration products of the cement composites were analyzed after exposure to seawater...
-
Exploration of Behavioral Patterns and Cognitive Biases among Stock Market Investors
PublicationThis study aims to explore behavioral patterns and cognitive biases among stock market investors. By analyzing investor behavior through a stock market simulator, the research seeks to understand the impact of cognitive biases on investment decisions. The methodology encompasses a detailed analysis of transaction data to identify prevalent patterns and biases. Findings suggest that biases such as overconfidence, representativeness...
-
Fatigue Damage Evolution in SS316L Produced by Powder Bed Fusion in Different Orientations with Reused Powder Feedstock
PublicationBackground Metal Laser Powder Bed Fusion Melting (LPBF-M) is considered economically viable and environmentally sustainable because of the possibility of reusing the residual powder feedstock leftover in the build chamber after a part build is completed. There is however limited information on the fatigue damage development of LPBF-M samples made from reused feedstock. Objective In this paper, the stainless steel 316 L (SS316L)...
-
Finite Element Analysis of Occupant Risk in Vehicular Impacts into Cluster Mailboxes
PublicationThe deployment of cluster mailboxes (CMs) in the U.S. has raised safety concerns for passengers in potential vehicular crashes involving CMs. This study investigated the crashworthiness of two types of CMs through nonlinear finite element simulations. Two configurations of CM arrangements were considered: a single- and a dual-unit setup. These CM designs were tested on flat-road conditions with and without a curb. A 2010 Toyota...
-
Flexibility in PAM recognition expands DNA targeting in xCas9
PublicationxCas9 is an evolved variant of the CRISPR-Cas9 genome editing system, engineered to improve specificity and reduce undesired off-target effects. How xCas9 expands the DNA targeting capability of Cas9 by recognising a series of alternative protospacer adjacent motif (PAM) sequences while ignoring others is unknown. Here, we elucidate the molecular mechanism underlying xCas9’s expanded PAM recognition and provide critical insights...
-
Flexible MXene/Laser-Induced Porous Graphene AsymmetricSupercapacitors: Enhanced Energy Density of Lateral and Sandwich Architectures Under Different Electrolytes
PublicationDeployment of two-dimensional layered materials beyond graphene, i.e., MXene (Ti3C2Tx, T=-OH, F, O) are rigorously explored for generation-II electrochemical energy storage systems. We report strategic development of asymmetric supercapacitors (ASCs) comprising MXene as negative and laser-induced porous graphene (LIPG) as positive electrode (i.e., MXene//LIPG) to improve electrochemical energy storage in lateral (coplanar) and...
-
Framework for reliable and automatic multi-frequency correction of non-anechoic antenna measurements
PublicationCorrection of antenna far-field measurements performed in uncontrolled environments is a challenging problem. Non-anechoic sites, while cheap compared to professional laboratories, suffer from poor propagation properties due to multipath interferences and noise from external sources of electromagnetic radiation. Direct measurements in such conditions are ineffective for drawing meaningful conclusions on antenna performance. The...
-
Frequency Reconfigurable PIN Diode-Based Reuleaux-Triangle-Shaped Monopole Antenna for UWB/Ku Band Applications
PublicationThis paper presents a frequency reconfigurable monopole antenna developed for UWB/Ku band applications. The design employs a microstrip-fed Reuleaux-triangle-shaped patch with a defected ground structure. The antenna exhibits a wide operating bandwidth achieved due to rectangular slits integrated into the Reuleaux-triangle patch. Meanwhile, adding rectangular slots in the ground plane improves the return loss level. Frequency reconfigurability...
-
High Internal Phase Oil-in-Water Emulsions Stabilised by Cost-Effective Rhamnolipid/Alginate Biocomplexes
PublicationA novel, cost-effective, partially purified biosurfactant in the form of a rhamnolipid biocomplex (RLBC) was investigated for its emulsifying properties. The RLBC was obtained through the cultivation of Pseudomonas sp. SP-17 on glycerol, followed by acidic precipitation, without the use of organic solvents for isolation or purification. Composed of rhamnolipids (RLs) and the exopolysaccharide alginate, RLBC exhibited emulsifying...
-
Highly Compact Dual-Band Frequency Selective Surface for Path-loss and Coverage Improvement in Millimeter-wave Advanced Wireless Applications
PublicationIn this work, a compact dual-band frequency selective surface (FSS) for path-loss and coverage improvement in advanced wireless communication is showcased. The proposed FSS is a single-layer design with stable and high performance at both 24 GHz and 38 GHz operating frequencies, respectively. The design is highly compact with two wide-band reflection coefficient responses having 49.5% (14.5 – 26.4 GHz) and 66.57% (35.8 – 39.8 GHz)...