Failures and a concept of corrosion protection system for spiral classifiers at KGHM Polska Miedź S.A. Ore Concentration Plant
Abstract
The Ore Concentration Plant, where the process of flotation is carried out as well as the final production of copper concentrate, plays a key role in the entire production line of KGHM Polska Miedź S.A. Majority of operations related to the run-of-mine preparation to copper flotation enrichment are carried out in a water environment. The maintaining of production process continuity requires to pursue minimisation of many production limitations. The corrosive action of the technological medium, being a salted water suspension of ground copper ore, is one of them. The concept of spiral classifiers cathodic protection presented in this paper may become an alternative to the anti-corrosion protection methods of machinery and equipment used now at the KGHM. The obtained results of research indicate a possibility of significant reduction of classifiers corrosion rate at the application of cathodic protection and of a few times extension of the period of spiral classifiers operation, which replacement generates substantial operating costs.
Citations
-
2
CrossRef
-
0
Web of Science
-
2
Scopus
Authors (2)
Cite as
Full text
- Publication version
- Accepted or Published Version
- License
- open in new tab
Keywords
Details
- Category:
- Articles
- Type:
- artykuły w czasopismach
- Published in:
-
ENGINEERING FAILURE ANALYSIS
no. 109,
pages 104287 - 104294,
ISSN: 1350-6307 - Language:
- English
- Publication year:
- 2020
- Bibliographic description:
- Czekajło M., Żakowski K.: Failures and a concept of corrosion protection system for spiral classifiers at KGHM Polska Miedź S.A. Ore Concentration Plant// ENGINEERING FAILURE ANALYSIS -Vol. 109, (2020), s.104287-104294
- DOI:
- Digital Object Identifier (open in new tab) 10.1016/j.engfailanal.2019.104287
- Bibliography: test
-
- M. Bigum, L. Brogaard, et al., Metal recovery from high-grade WEEE: A life cycle assessment. J.Hazard. Mater. 207 (2012) 8-14. https://doi.org/10.1016/j.jhazmat.2011.10.001 open in new tab
- Baran, M. Sliwka, et al., Selected properties of flotation tailings wastes deposited in the Gilow and Zelazny Most waste reservoirs regarding their potential environmental management. Arch. open in new tab
- Min. Sci. 58 (3) (2013) 969-978. https://doi.org/10.2478/amsc-2013-0068 open in new tab
- C.M. Torres, M.E. Taboada, T.A. Graber, et al., The effect of seawater based media on copper dissolution from low-grade copper ore. Miner. Eng. 71 (2015) 139-145. open in new tab
- https://doi.org/10.1016/j.mineng.2014.11.008 open in new tab
- B.T. Lu, Statistical approaches for assessment of water corrosivity. Corros. Eng. Sci. Technol. 46 (5) (2011) 651-656. https://doi.org/10.1179/147842210X12695149034016 open in new tab
- R.A. Pisigan, J.E. Singley, Evaluation of water corrosivity using the Langelier index and relative corrosion rate models. Mater. Perform. 24 (4) (1985) 26-36. open in new tab
- K. Skrzypkowski, W. Korzeniowski, et al., Application of long expansions rock bolt support in the underground mines of Legnica-Glogow copper district. Studia Geotechnica et Mechanica 39 (3) (2017) 45-57. https://doi.org/10.1515/sgem-2017-0029 open in new tab
- Y. Atasoy, D.J. Spottiswood, A study of particle separation in a spiral concentrator. Miner. Eng. 8 (10) (1995) 1197-1208. https://doi.org/10.1016/0892-6875(95)00084-4 open in new tab
- C. Bazin, M. Sadeghi, M. Renaud, An operational model for a spiral classifier. Miner. Eng. 91 (2016) 74-85. https://doi.org/10.1016/j.mineng.2015.09.024 open in new tab
- P.I. Pilov, A.S. Kirnarsky, Developments of spiral separation technology for retreatment of fines from coal dumps. Mine planning and equipment section. In: 6th International Symposium on Mine Planning and Equipment Selection (MPES) Ostrava, Czech Republic, (1997) 193-196.
- X. Lan, J.T. Gao, et al., A novel method of selectively enriching and separating rare earth elements from rare-earth concentrate under super gravity. Miner. Eng. 133 (2019) 27-34 open in new tab
- https://doi.org/10.1016/j.mineng.2019.01.010 open in new tab
- N.E. Altun, et al., The use of continuous centrifugal gravity concentration in grinding circuit. Modified approach for improved metallurgical performance and reduced grinding requirements.
- Physicochem. Probl. Mineral Pro. 51 (1) (2015) 115-126. https://doi.org/10.5277/ppmp150111 open in new tab
- L. Tole, G. Koop, Estimating the impact on efficiency of the adoption of a voluntary environmental standard: an empirical study of the global copper mining industry. J. Prod. Anal. 39 (1) (2013) 34-45. https://doi.org/10.1007/s11123-012-0278-y open in new tab
- S. Szabo, I. Bakos, Cathodic Protection with Sacrificial Anodes. Corr. Rev. 24 (3-4) (2006a) 231- 280. https://doi.org/10.1515/CORRREV.2006.24.3-4.231 open in new tab
- S. Szabo, I. Bakos, Impressed Current Cathodic Protection. Corr. Rev. 24 (1-2) (2006b) 39-62. https://doi.org/10.1515/CORRREV.2006.24.1-2.39 open in new tab
- J. Orlikowski, J. Ryl, et al., Instantaneous Impedance Monitoring of Aluminum Alloy 7075 open in new tab
- Corrosion in Borate Buffer with Admixed Chloride Ions. Corrosion 71 (7) (2015) 828-838. https://doi.org/10.5006/1546 open in new tab
- M. Narozny, K. Zakowski, K. Darowicki, Method of sacrificial anode transistor-driving in cathodic protection system. Corrosion Sci. 88 (2014) 275-279. open in new tab
- https://doi.org/10.1016/j.corsci.2014.07.041 open in new tab
- M. Narozny, K. Zakowski, K. Darowicki, Method of sacrificial anode dual transistor-driving in stray current field. Corrosion Sci. 98 (2015) 605-609. open in new tab
- https://doi.org/10.1016/j.corsci.2015.06.006 open in new tab
- K. Darowicki, J. Orlikowski, et al., Conducting coatings as anodes in cathodic protection. Prog. Org. Coat. 46 (3) (2003) 191-196. https://doi.org/10.1016/S0300-9440(03)00003-1 open in new tab
- T. Huber, Y. Wang, Effect of Propeller Coating on Cathodic Protection Current Demand: Sea Trial and Modeling Studies. Corrosion 68 (5) (2012) 441-448. https://doi.org/10.5006/0010-9312- 68.5.441 open in new tab
- O.O. Knudsen, U. Steinsmo, Effects of cathodic disbonding and blistering on current demand for cathodic protection of coated steel. Corrosion 56 (3) (2000) 256-264. open in new tab
- https://doi.org/10.5006/1.3287651 open in new tab
- K. Zakowski, Studying the effectiveness of a modernized cathodic protection system for an offshore platform. Anti-Corros. Methods Mater. 58 (4) (2011) 167-172. open in new tab
- https://doi.org/10.1108/00035591111148876 open in new tab
- K. Zakowski, M. Szocinski, M. Narozny, Study of the formation of calcareous deposits on cathodically protected steel in Baltic sea water. Anti-Corros. Methods Mater. 60 (2) (2013) 95- 99. https://doi.org/10.1108/00035591311308065 open in new tab
- J.D. Sinclair, 1978. Instrumental gravimetric method for indexing materials, contaminants, and corrosion products according to their hygroscopicity. J. Electrochem. Soc. 125 (5) (1978) 734- 742. https://doi.org/10.1149/1.2131538 open in new tab
- Verified by:
- Gdańsk University of Technology
seen 114 times
Recommended for you
Corrosion monitoring as a factor increasing the safety of hydrotechnical infrastructure
- R. Mazur,
- P. Stefanek,
- J. Orlikowski