Search results for: HEAVY DUTY TRUCK
-
Assessment of unusual failure in crankshaft of heavy-duty truck engine
PublicationThe unusual premature failure of a heavy-duty truck engine crankshaft has been the subject of a rigorous study, and this manuscript describes it in detail. The failure was happened to begin with the growth of the crack from the surface defects, in the form of the clusters of non-metallic inclusions, in the lubrication hole zone of the first main journal, which was the stress concentration zone. A series of experiments including...
-
Thermal failure of a second rotor stage in heavy duty gas turbine
PublicationThe impulse mode of operation and the supply of various types of fuels causes frequent failures even in the heavy duty gas turbines. The paper presents the ravages of second rotor stage failure in a gas turbine. The excessive thermal elongation rise caused by fuel change was indicated as the main cause. We applied nonlinear numerical analysis, preceded by thermodynamic calculations of the turbine and visual inspection of the effects...
-
Heavy duty vehicle fuel consumption modelling using artificial neural networks
PublicationIn this paper an artificial neural network (ANN) approach to modelling fuel consumption of heavy duty vehicles is presented. The proposed method uses easy accessible data collected via CAN bus of the truck. As a benchmark a conventional method, which is based on polynomial regression model, is used. The fuel consumption is measured in two different tests, performed by using a unique test bench to apply the load to the engine. Firstly,...
-
Increasing the Durability of Critical Parts in Heavy-Duty Industrial Machines by Deep Cryogenic Treatment
Publication -
Analysis of pavement structure sensitivity to passage of oversized heavy duty vehicle in terms of bearing capacity
PublicationOversized heavy duty vehicles occur in traffic very rarely but they reach extremely high weights, even up to 800 tonne. The detrimental impact of these vehicles on pavement structure is much higher than in case of commercial vehicles that comprise typical traffic, thus it is necessary to assess the sensitivity of pavement structure to passage of oversized vehicles. The paper presents results of sample calculations of load equivalency factor...
-
Process Monitoring in Heavy Duty Drilling Rigs—Data Acquisition System and Cycle Identification Algorithms
Publication -
Vibration-Based Diagnostics of Radial Clearances and Bolts Loosening in the Bearing Supports of the Heavy-Duty Gearboxes
Publication -
Heavy Duty Vehicle Fuel Consumption Modelling Based on Exploitation Data by Using Artificial Neural Networks
PublicationOne of the ways to improve the fuel economy of heavy duty trucks is to operate the combustion engine in its most efficient operating points. To do that, a mathematical model of the engine is required, which shows the relations between engine speed, torque and fuel consumption in transient states. In this paper, easy accessible exploitation data collected via CAN bus of the heavy duty truck were used to obtain a model of a diesel...
-
Design of a test bench for determining the general characteristics of an internal combustion engine using a hydraulic power take-off system
PublicationThe paper presents a design of an engine test bench, which is used to determine the general characteristics of a truck engine using a power take-off (PTO). PTO drives a hydraulic system that generates a load on the engine at various points in its operation in the power range specified by the hydraulic system. The design allows for stationary and mobile tests with the test bench mounted on the truck, without any modification of...
-
COMPARISON OF NOISE EMISSION OF HCT AND CLASSIC VEHICLE COMBINATIONS FOR TIMBER TRANSPORTATION IN SWEDEN
PublicationBy means of a special simulation tool, the noise emission of a high-capacity heavy vehicle (11 axles) was compared to that of a classic heavy vehicle (a truck-dolly-semitrailer with 8 axles). The two cases are designated “Extended vehicle” versus “Classic vehicle” in this study, having total lengths of 34 and 25 m, respectively. The Classic vehicle represents the most common articulated heavy vehicle configuration for transport...
-
Analysis of the possibility of determining the general characteristics using the operational data of a vehicle engine
PublicationThe paper presents an analysis of the possibility of determining the general characteristics using the operational data of an engine of refuse collection vehicle. Data acquisition was done by reading information from the CAN network using FMS standard (Fleet Management System), which is widely used in heavy duty vehicles since year 2002. The paper presents the analysis of the expected measurement uncertainties resulting from the...
-
Impact of overloaded vehicles on load equivalency factors and service period of flexible pavements
PublicationOverloaded vehicles occur less frequently in comparison to properly loaded vehicles but due to their greater potential to cause damage they significantly contribute to the distress of pavement structure. As the studies show, the phenomena of vehicles overloading intensifies when the control of traffic is poor and the average percentage of overloaded vehicles on analyzed roads varies from 6% to 23%. The main goal of the ar-ticle...
-
Długie pociągi
PublicationWskazano, że przy wprowadzaniu długich pociągów pojawiają się możliwości, ale i ograniczenia różnej natury oraz problemy do rozwiązania. Inne w przypadku długich pociągów i inne w przypadku ciężkich pociągów. Pokazano długie pociągi, jako szansę na polepszenie bezpieczeństwa na drogach, poprzez ograniczenie na nich ruchu samochodów ciężarowych. Łatwiej będzie w praktyce realizować pomysł „Tiry na tory” Długie pociągi są szansą...
-
Grzegorz Ronowski dr hab. inż.
People -
Contribution of dynamic vehicle loads to pavement failure
PublicationPavement surfaces are not ideally even, which causes dynamic loads of vehicle axles. Distribution of dynamic loads of a given axle is similar to normal distribution and can be described by static load and dynamic load coefficient. The dynamic load coefficient depends on road profile, vehicle speed, properties of suspensions and static load of axle. While for a given road section road profile remains constant, vehicle speed and...
-
The influence of inflation pressure and ambient temperature on the value of the truck tires rolling resistance
PublicationThe articlediscusses the effect of inflation pressure and the ambient temperature on the value of the rolling resistance of truck tires which directly translates into fuel consumption. For this purpose, a series of measurements was made at two ambient temperatures (at 25°C and -15°C), using different pumping pressures.
-
Evaluation of the efficiency of the duty cycle of refuse collection vehicle based on real-world data
PublicationIn this paper a method of the efficiency evaluation of the duty cycle of Refuse Collection Vehicle is presented. Using real world data, two representative duty cycles were analysed. Total cycle efficiency was calculated, as well as the efficiency of particular cycle phases. Then, energy needed to collect and compact the waste and energy from fuel were compared. Measured and calculated values were shown on the diagrams illustrating...
-
Membranes for toxic- and heavy-metal removal
PublicationSince time ago, membranes have greatly attracted the attention of researchers for different types of water-treatment applications, such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, and heavy metals. Nowadays, one of the current challenges of research community definitely deals with the removal of toxic and heavy metals from water. In this regard, the current chapter provides enough...
-
A new duty cycles calculation method in pulse width modulation for direct matrix converters based on the shape function concept
PublicationPaper presents a new approach to duty cycle calculation in pulse width modulation for direct matrix converters. The essence of the proposed method is the use of elementary shape function of finite element. The algorithm for calculating the duty cycles was reduced to simple operations on the coordinates of input and output voltage vectors without trigonometric functions.
-
Phytoremediation of heavy metals by white cabbage
PublicationPhytoremediation is regarded as the cheapest and environmentally most friendly technology for cleaning up soil. The most widespread and most profitable technique is phytoextraction, used mainly for removing heavy metals and radioactive elements from thesoil. Over 400 plant species have been identified as natural metal hyperaccumulators representing about 0.2 % of all angiosperms. Unfortunately, most of these plants are characterised...
-
Determination of heavy metals in eyeshadows from China
PublicationPersonal care products and cosmetics are used daily by many people, causing local exposure to certain chemical substances through the application directly inside the oral cavity, on the skin, lips, eyes, and mucosa. Eyeshadows are among the most commonly used types of cosmetics. According to scientifc reports, they may contain heavy metals, especially in non-original products. The exposure to said heavy metals may cause local skin...
-
Dual fuelling of truck CI engine with diesel oil and mixture of propane and butane
PublicationW artykule przedstawiono zasadę działania dwupaliwowego zasilania jednocześnie olejem napędowym i odparowanym LPG silnika samochodu ciężarowego. Pokazano korzyści wynikające ze zużycia tańszego paliwa zbadane doświadczalnie.
-
Calixthioamides as ionophores for transition and heavy-metal cations
PublicationThere is an increasing interest in applying p-tert-butylcalix[4]arenes as sensing materials in ion-selective electrodes(ISEs). Considerable efforts were made to design calixarenes that are selective for some heavy- or transitionmetal ions to be used in ISEs for controlling and monitoring the level of such pollutants in the environment. It has been reported that introduction of softer sulfur atoms instead of oxygen atoms in calix[4]arene...
-
Influence of sludge treatment processes on heavy metal speciation
PublicationSludge composition is depending on sewage quality and also affected by processing methods such as thickening, stabilization and dewatering. During those processes some of sludge's undesirable properties might be reduced or enhanced.The objective of the study is the assessment of the influence of sludge processing on selected heavy metals partitioning between phases (aqueous and particle) and sludge. Sludge from the WWTP in Gdansk...
-
Accumulation of radioisotopes and heavy metals in selected species of mushrooms
PublicationSeven species of forest mushrooms from different regions of Poland (edible: Imleria badia, Cantharellus cibarius, Xerocomus subtomentosus, Suillus luteus and inedible by humans but being food for animals: Paxillus involutus, Tylopilus felleus and Russula emetica) were analyzed for radioisotope activity (Cs-137, K-40, Bi-214 and Pb-210) as well as concentrations of heavy metals (aluminum, chromium, cadmium, manganese, iron, lead,...
-
A new concept of PWM duty cycle computation using the Barycentric Coordinates in a Three-Dimensional voltage vectors arrangement
PublicationThe paper presents a novel approach to the Pulse Width Modulation (PWM) duty cycle computing for complex or irregular voltage vector arrangements in the two (2D) and three–dimensional (3D) Cartesian coordinate systems. The given vectors arrangement can be built using at least three vectors or collections with variable number of involved vectors (i.e. virtual vectors). Graphically, these vectors form a convex figure, in particular,...
-
Speciation of heavy metals in wastewater and rejected waters from multistage bioreactors (MUCT)
PublicationThe objective of the study is to investigate the occurrence and availability of selected heavy metals after subsequent stages of treatment in WWTP with activated sludge (enhanced biological N and P removal). To achieved the target it was necessary to recognize the allocation of selected heavy metals between aqueous and solid phase in wastewater and reject waters. Application of sequential extraction of such metals as Cd Zn, Pb,...
-
Calix[4]arene-Thioamides as Ionophores for Transition and Heavy Metal cations
PublicationCalix[4]arene derivatives play an important role as sensing materials in Ion Selective Electrodes(ISEs). Nowadays a high impact is put to control in natural waters the level of toxic heavy metals, like Pb ,Cd, Hg or Cu which may cause the great risk to human health. Our goal was to design and to synthesize ligands possessing ability to bind transition and heavy metal cations. The synthesis, crystal structures,extractive and ionophoric...
-
The speciation of selected heavy metals in sewage sludge stabilized in reed basins
PublicationThe aim of the work was to determine influence of time on organic matter content, nutrients concentrations as well as speciation of selected heavy metals (Cd, Pb, Ni, Cr, Cu and Zn) in sewage sludge stabilized in reed basins during 7-15 years. The analyzed sewage sludge was collected from reed basins from four municipal WWTPs located in Denmark serving from 9 000 to 40 000 pe in Vallo, Rudkøbing, Nakskov and Helsinge. Sewage...
-
Ongoing progress on novel nanocomposite membranes for the separation of heavy metals from contaminated water
PublicationMembranes, as the primary separation element of membrane-based processes, have greatly attracted the attention of researchers in several water treatment applications, including wastewater treatment, water purification, water disinfection, toxic and non-toxic chemical molecules, heavy metals, among others. Today, the removal of heavy metals from water has become challenging, in which chemical engineers are approaching new materials...
-
Application of bismuth film electrode for determination of heavy metals by stripping voltammetry
PublicationWhen Wang's research group introduced a new type of a working electrode: bismuth film plated electrode (BiFE), it has started attracting increasing attention in the field of electrochemical stripping analysis. These electrodes are shown to be very attractive alternative to common mercury-based electrodes, which are predominantly used in analysis of trace heavy metals.For the determination of heavy metals (Zn, Cd, Pb, Cu) used square...
-
Annual variability of heavy metal content in Svalbard reindeer faeces as a result of dietary preferences
PublicationDuring both winter and summer, Svalbard reindeer selectively feed on different types of vegetation that are not only a source of nutritional value, but also a place of heavy metal accumulation. In the present study, the content of cadmium, chromium, copper, iron, lead, nickel, manganese, and zinc in reindeer excrement was measured. The main aims were to determine the seasonal content of several heavy metals in Svalbard reindeer...
-
CPTU/DMT control of heavy tamping compaction of sands
PublicationHeavy tamping compaction method in cohesionless alluvial soil was evaluated with CPTU and DMT tests. Some examples of interpretation of soundings in pre-treated and compacted sands are given. The compaction work was performed in two stages. Compaction control was performed after each stage of tamping. Additional tests were performed two weeks after the compaction works completion to study the set-up effect. While typical increase...
-
Recent Advances in Graphene Oxide-Based Membranes for Heavy Metal Ions Separation
PublicationGraphene oxide (GO)-based membranes have been widely investigated for separation of dyes, salt ions, heavy metal ions, and biomolecules due to their high mechanical strength, single-layered structure, large surface area, and high affinity. However, due to irregular pore structure, nanochannels, interlayer distance, easy functionalization, swelling effect, and chemical stability under aqueous environment limited their separation...
-
Analytical chemistry in technical approaches: immobilization of biosorbent waste containing heavy metals in cemented materials
PublicationAn ecologically safe and economically justified method of stabilization of the used biosorbents was developed. Sorbent contaminated with heavy metals has been successfully solidified/stabilized using a hydraulic binder. The test results indicated that up to 1% of the biosorbent residue used could be added without compromising the compressive strength of the mortar. The compressive strength of the modified mortars did not change...
-
Determination of Heavy Metals Concentration in Water and Soil at Various Locations in Lahore and their Harmful Impacts on Human and Plants life
PublicationHeavy metals poisoning of soil and water has resulted from industrial expansion in Lahore, Pakistan, creating a significant environmental hazard. As a result, monitoring the contamination of soil and water around industrial sites is critical. The fact that higher concentrations of heavy metals have a negative influence on both plants and human life and this cannot be ignored. Higher heavy metal concentrations have a direct impact...
-
International Journal of Heavy Vehicle Systems
Journals -
Selection of form factors of machine carrying systems in reliance on the process duty
Publication -
The Comparison of the Emissions from Light Duty Vehicle in On-road and NEDC Tests
Publication -
Global development of emissions reduction strategies from light duty vehicles
Publication -
Removal and speciation of heavy metals in the constructed wetland treating landfill leachate
PublicationThe results of heavy metals removal and speciation of metals at two treatment wetlands receiving landfill are discussed. The first TW is a surface flow facility consisting of 10 ponds. The next TW is a newly constructed pilot-scale facility consisting of three beds with alternately vertical and horizontal sub-surface flow. The metals concentrations were analysed in leachate(both TWs) and bottom sediments (surface flow TW). Seasonal...
-
Ce site dilution effects in the antiferromagnetic heavy fermion CeIn3
PublicationLa-doped intermetallic single crystals of Ce1−xLaxIn3 were synthesized via an In self-flux method throughout the entire range (x = 0–1). The prototypical heavy-fermion compound CeIn3 shows an antiferromagnetic phase transition at 10.1 K and becomes superconducting near a critical pressure where TN is completely suppressed. As the La concentration increases, Ce moments are diluted, and the lattice constant increases linearly, satisfying Vegard’s...
-
Review of cigars and cigar-type products as potential sources of consumer exposure to heavy metals
PublicationThe popularity of cigars, growing since 1993, has not gone hand in hand with the increased interest of researchers in these products. Although the literature widely describes the harmfulness of tobacco and the content of toxic substances in tobacco products, the topic is often treated selectively as relating primarily to cigarettes and rarely extends to other products of the broadly defined tobacco industry. However, there is no...
-
Speciation of heavy metal compounds in samples of biota from marine ecosystems
PublicationIt has become increasingly evident that the toxicity, mobility, bioavailability and bioaccumulation of metals are dependent on the particular physico-chemical form in which the element occurs in the environment. Special attention is paid to metals, which are essential for the proper functioning of organisms if present in appropriate amounts but are toxic if in excess (i.e. Se, Cr, Zn), and also to non-essential elements (i.e. Hg,...
-
MXene-based materials for removal of antibiotics and heavy metals from wastewater– a review
PublicationAs a novel family of 2D materials, MXenes provide an extensive variety of applications in water and effluent treatment due to their distinctive properties and attractive applicability, including superior electrical conductivity, higher thermal stability, hydrophilicity, and high sorption-reduction capacity. Their excellent sorption selectivity makes them perfect for removing hazardous contaminants. Currently, MXene-based materials...
-
The results of measuring concentrations of heavy metals, petroleum hydrocarbons and humic acids in watercourses around the municipality of Gdańsk in 2005
Open Research DataThe dataset contains the results of a measurement of concentrations of heavy metals (cadmium, lead and mercury), petroleum hydrocarbons and humic acids in watercourses around the municipality of Gdańsk in 2005. The data was collected from January to December, once a month at 23 measuring stations located at 15 watercourses.
-
The scanning electron microscopy (SEM) studies of heavy boron-doped diamond oxidation under high-temperature
Open Research DataThe dataset contains the results of scanning electron microscopy (SEM) images of heavy boron-doped diamond (BDD) electrodes subjected to high-temperature oxidation in a furnace at 600 Celsius. The micrographs reveal the material decomposition of BDD grains due to high temperature.
-
A comprehensive assessment of environmental pollution by means of heavy metal analysis for oysters' reefs at Hab River Delta, Balochistan, Pakistan
PublicationThe heavy metal pollution status of oyster reefs has been assessed with respect to ten metals pollutants in seawater, sediments, and tissues of above two oysters (soft tissues and shells) for assessing the pollution status in a short food chain in Hab River Delta. The results showed that heavy metals accumulated in M. bilineata were higher than those in M. cuttackensis. Simultaneously, the population of M. bilineata species has...
-
Honey as an indicator of heavy metals in the environment
PublicationHoney bees collect nectar, pollen and honeydew to produce bee products. One of them is honey, which due to chemical composition and properties is considered by human as a valuable food product. When honey bees collect substrates to produce honey they can bring contaminants to the hive. The presence of xenobiotics in bee products may lower their quality and devalue their properties, and also endanger human health. Many scientists...
-
TOLERANCE OF ENVIRONMENTAL BACTERIA TO HEAVY METALS
Publication -
Nicole Nawrot dr inż.
PeopleDr. Eng. Nicole Nawrot has been employed at the Department of Sanitary Engineering since 2016. In 2021, she obtained a PhD in the field of engineering and technical sciences in the discipline of environmental engineering, mining and energy. Doctoral thesis entitled "Heavy metals in urban retention tanks bottom sediments: distribution, source tracking, and evaluation of phytostabilization adaptability and performance of P. australis...
-
Heavy Metals in a High Arctic Fiord and Their Introduction with the Wastewater: A Case Study of Adventfjorden-Longyearbyen System, Svalbard
PublicationLongyearbyen is the largest settlement on Svalbard archipelago, with 2400 permanent residents and approximately 150,000 tourists visiting every year. The city annually releases approximately 285,000 m3 of untreated wastewater to the nearby Adventfjorden. To date, the environmental impact of this continuous input has been studied mainly regarding the sediments and benthic fauna in the fiord. Here, we present results from a study...
-
Bioaccumulation of Metals in Tissues of Marine Animals, Part I: the Role and Impact of Heavy Metals on Organisms
PublicationHeavy metals contribute to the anthropogenic contamination of marine ecosystems. Some of them are essential to the life processes of organisms; others are toxic, even at low concentrations. They penetrate organisms via food, respiratory pathways or the skin. The extent to which metals penetrate organisms is measured by the bioconcentration and bioaccumulation factors and also by their transport between organisms at different trophic...
-
Recent advancements in molecularly imprinted polymers for the removal of heavy metal ions and dyes
PublicationContamination set off by highly toxic metal ions and dyes is a big threat to the environment and living beings. Various industries like metal plating, mining, pesticides, battery manufacturing, and dyeing release metal ions and toxic dyes directly into the water. It is necessary to remove these toxic substances from the environment. Molecular imprinting technology (MIT) got a lot of attention in the last two decades because of...
-
Distribution and removal efficiency of heavy metals in two constructed wetlands treating landfill leachate
PublicationThe results of heavy metals (Fe, Mn, Zn, Ni, Cu, Cr, Pb, Cd) removal and partitioning between aqueous and solid phases at two wetlands (TWs) treating municipal landfill leachates are presented. One of the TWs is a surface flow facility consisting of 10 ponds. The other TW is a newly constructed pilot-scale facility consisting of three beds with alternately vertical and horizontal sub-surface flow. The metals concentrations were...
-
Simultaneous removal of heavy metals and dyes in water using a MgO-coated Fe3O4 nanocomposite: Role of micro-mixing effect induced by bubble generation
PublicationThis study focused on the development of a nano-adsorbent for contaminant removal without the use of any external energy. An eco-friendly Fe3O4@MgO core-shell nanocomposite was synthesized and tested for the removal of a heavy metal, lead (Pb2+) and a dye, rhodamine B (RhB). The addition of H2O2 into the system enabled the self-mixing of the aqueous solution containing Fe3O4@MgO through the generation of bubbles. This system showed...
-
The scanning spreading resistance microscopy (SSRM) studies of heavy boron-doped diamond oxidation under high-temperature
Open Research DataThe dataset contains the results of scanning spreading resistance microscopy (SSRM) of heavy boron-doped diamond (BDD) electrodes subjected to high-temperature oxidation in a furnace at 600 Celsius. The micrographs reveal the local change of electric properties at certainly crystallographic orientations of BDD grains and at the grain boundaries due...
-
Impact of heavy metals on the female reproductive system
Publication -
Change in Heavy Metals Concentrations in Sediments Deposited in Retention Tanks in a Stream after a Flood
PublicationOur paper presents the results of heavy metal (HM) (Zn, Cu, Pb, Cd) content in bottom sediments from retention tanks along Oliwa Stream in Gdańsk, Poland, before a flood (BF) and after a flood (AF) 14-15 July 2016. The flood had a huge impact on the quality of bottom sediments and their displacement. The concentrations of HM differed significantly for research series conducted 3 months BF and 8 months AF. The concentration of Cu...
-
Concentrations of heavy metals and PCBs in the tissues of European beavers (Castor fiber) captured in northeastern Poland
PublicationEuropean beavers (Castor fiber) from two regions were examined to identify exposure to persistent environmental contaminants. A reference group was comprised of six animals from the Forest Division of Srokowo, and an exposed group was comprised of five animals from the vicinity of a former military airport operated in 1918–1986—both from Warmia land in Poland. 137 Cs in beavers' muscles was considered negligible for the overall...
-
Rozmieszczenie wybranych metali ciężkich w ekosystemie oczyszczalni hydrofitowej w Bielkowie.Distribution of heavy metals in ecosystem of free water surface system in Bielkowo.
PublicationIn the article the results of investigations of biomass crop and heavy metal contents in bottom sediments and in three species of plants (Glyceria maxima, Typha latifolia)inhabiting a wetland system in Bielkowo, Poland are presented. The measurements were carried out three times during the vegetation season (May, July and October). The contents of metals in different fragments of plants (leaves, stalks and roots) was analyzed....
-
Effects of Fuel Properties on Exhaust Emissions from the Latest Light-Duty DI Diesel Engine
Publication -
Patient rights, risk, and responsibilities in the genetic era – a right to know, a right not to know, or a duty to know?
Publication -
The sensitivity of bacteria to heavy metals in presence of mineral ship motor oil in coastal marine sediments and waters.
PublicationThe sensitivity of bacteria, isolated from coastal marine sediments and waters of Sopot beach, Gdańsk Bay (Poland), to heavy metals in the presence of mineral ship motor oil were studied. All isolated heterotrophic bacteria were resistant to the 0.1 mM lead concentration occurring in the environment. Metal resistance of bacteria isolated from coastal water was strongly related to mineral ship motor oil concentration. At 0.1% mineral...
-
Heavy Metals in Sediments of Urban Streams: Contamination and Health Risk Assessment of Influencing Factors
PublicationSediments of two urban streams in northern Poland outflowing to the Baltic Sea were assessed to explain the spatial variation in relation to urbanization level of the catchment, the role of retention tanks (RTs) and identification of pollution level. During the 3 month period of investigation sediment samples were collected from the inflow (IN) and outflow (OUT) of six RTs located on streams for flood protection. Six heavy metals...
-
Partitioning of heavy metals in sub-surface flow treatment wetlands receiving high-strength wastewater
PublicationThe retention of heavy metals at two pilot-scale treatment wetlands (TWs), consisting of two vertical flow beds (VSSF) followed by a horizontal flow bed (HSSF) was studied. The TWs received highstrength wastewater: reject waters from sewage sludge centrifugation (RW) and landfill leachate (LL). The concentrations of metals: Fe, Mn, Zn, Al, Pb, Cu, Cd, Co, Ni were measured in treated wastewater, substrate of the beds and in plant...
-
LS-DYNA simulations of the impacts of a 38-ton Heavy Goods Vehicle into a road cable barrier
PublicationNowadays, more and more attention is being paid to safety on roads and motorways. It is due to the continuous development of road and motorway network and a significant increase of the number of vehicles on roads. To meet the expectations of improving road safety in Poland, the Road Innovations Development (RID) research programme was implemented in 2016. The aim of the RID 3A - Road Safety Equipment (RoSE) project is a comprehensive...
-
Methodological evaluation of method for dietary heavy metal intake
PublicationNarażenie człowieka na działanie zanieczyszczeń środowiskowych jest poważnym problemem w obecnych czasach. Metale ciężkie są uważane za toksyczne dla człowieka ze względu na tendencję kumulowania się w wybranych tkankach organizmu. Ponadto, ich obecność w ustroju jest przyczyną wielu schorzeń. Substancje szkodliwe mogą przenikać do organizmu kilkoma drogami, m.in. poprzez spożywanie skażonej żywności. Biorąc pod uwagę ryzyko związane...
-
Studies of Exfoliated Graphite (EG) for Heavy Oil Sorption
Publication -
Simultaneous Analysis of Heavy Metal Concentration in Soil Samples
Publication -
Effective configuration of a double triad planar parallel manipulator for precise positioning of heavy details during their assembling process
PublicationIn the paper, dynamics analysis of a parallel manipulator is presented. It is an atypical manipulator, devoted to help in assembling of heavy industrial constructions. Few atypical properties are required: small workspace; slow velocities; high loads. Initially, a short discussion about definition of the parallel manipulators is presented, as well as the sketch of the proposed structure. In parallel, some definitions, assumptions...
-
A Study of Gasoline-Ethanol Blends Influence on Performance and Exhaust Emissions from a Light-Duty Gasoline Engine
Publication -
Numerical methodology for evaluation the combustion and emissions characteristics on WLTP in the light duty dual-fuel diesel vehicle
PublicationThe worldwide aim of reducing environmental impact from internal combustion engines bring more and more stringent emission regulations. In 2017 by EU has been adopted new harmonized test procedure called WLTP. In general terms this test was designed for determining the levels of harmful emissions and fuel consumption of traditional and hybrid cars. This procedure contains specific driving scenarios which representing reallife driving...
-
The occurrence of heavy metals and metal-resistant bacteria in water and bottom sediments of the Straszyn reservoir (Poland)
PublicationThe aim of this study is investigate the distribution of selected heavy metals (zinc, copper, lead, cadmium) and metal-resistant bacteria in water and bottom sediments of drinking water reservoir for Gdańsk (Poland). The research area - Straszyn Lake is a dam reservoir on Radunia river, of the total volume of 3 mln m3. Sediment and water sampling took place between May and October 2013 (eight series). Regarding metal concentration...
-
ACTA PHYSICA HUNGARICA SERIES A: HEAVY ION PHYSICS
Journals -
HEAVY VEHICLE SYSTEMS-INTERNATIONAL JOURNAL OF VEHICLE DESIGN
Journals -
Speciation of heavy metals in bottom sediments of drinking water reservoir for Gdansk, Poland – changes over the 14 years
PublicationThere was conducted a comparative study of the concentrations of heavy metals (Zn, Cu, Pb, and Cd) in the surface layer of sediments collected in two investigation periods: 1999–2000 and 2013. Theresults demonstrated that the degree of metals pollution decreased over time. The contamina-tion factors (Cf) calculated for Zn, Cu, Pb, and Cd were respectively 3.63, 3.86, 3.23, and 3.25 in the first period of research and 1.35, 3.42,...
-
Speciation of heavy metals in bottom sediments of a drinking water reservoir for Gdańsk, Poland – changes over the 14 years
PublicationThere was conducted a comparative study of the concentrations of heavy metals (Zn, Cu, Pb, andCd) in the surface layer of sediments collected in two investigation periods: 1999–2000 and 2013.The results demonstrated that the degree of metals pollution decreased over time. The contaminationfactors (Cf) calculated for Zn, Cu, Pb, and Cd were respectively 3.63, 3.86, 3.23, and 3.25 in thefirst period of...
-
An examination of the effect of ethanol–gasoline blends' physicochemical properties on emissions from a light-duty spark ignition engine
Publication -
The Impact of Fuel Ethanol Content on Particulate Emissions from Light-Duty Vehicles Featuring Spark Ignition Engines
Publication -
The Effect of Various Petrol-Ethanol Blends on Exhaust Emissions and Fuel Consumption of an Unmodified Light-Duty SI Vehicle
Publication -
Evaluation of specific capacity of poultry litter in heavy metal sorption
Publication -
Distribution of heavy metals in vegetation of constructed wetlands in agricultural catchment
PublicationW artykule przedstawiono wyniki pomiarów zawartości wybranych metali ciężkiech w nadziemnych i podziemnych częściach trzech gatunków roślin hydrofitowych zasiedlających ekosystem oczyszczalni hydrofitowej w Bielkowie k. Gdańska.
-
APPLICATION OF THE THEORY OF SEMI-MARKOV PROCESSES TO DETERMINE A LIMITING DISTRIBUTION OF THE PROCESS OF CHANGES OF ABILITY AND INABILITY STATES OF FUEL SUPPLY SYSTEMS IN HEAVY FUEL DIESEL ENGINES
PublicationThe paper presents applicability of the theory of semi-Markov processes to determine a limiting distribution of the process of changes of technical states of fuel systems for marine engines running on heavy fuel oils. The proposed study of this process includes the components of such fuel systems like: 1 - injectors, 2 - high pressure hoses, 3 - injection pumps, 4 - low pressure hoses, 5 – fine filters, 6 - coarse filters, 7 – fuel-feed...
-
Do You Know What You Drink? Comparative Research on the Contents of Radioisotopes and Heavy Metals in Different Types of Tea from Various Parts of the World
PublicationThe aim of this study was to assess the potential health risks of radioactive elements and heavy metals ingested through the consumption of various types of tea imported to the Polish market (black, green, red, oolong and white). The concentrations [Bq/kg] of radionuclides (40K, 137Cs, 226Ra, 210Pb and 228Th) in tea leaves before and after brewing were measured using γ-ray spectrometry with high-purity germanium (HPGe). The concentrations...
-
Heavy metal accumulation and distribution in Phragmites australis seedlings tissues originating from natural and urban catchment
PublicationThe retention of heavy metal (HM) was studied in root and rhizomes (BLG), stems (ST), and leaves (LF) of Phragmites australis (common reed) seedlings collected from different locations, differing in the scale of anthropogenic interference. The analysis includes the reference samples of sediments in uncontaminated lake Garczonki and contaminated roadside ditch in Cieplewo. The concentrations of Zn, Cu, Pb, Cd, Ni, and Cr were analyzed...
-
Mariusz Kaczmarek dr hab. inż.
PeopleReceived M.Sc., Eng. in Electronics in 1995 from Gdansk University of Technology, Ph.D. in Medical Electronics in 2003 and habilitation in Biocybernetics and Biomedical Engineering in 2017. He was an investigator in about 13 projects receiving a number of awards, including four best papers, practical innovations (7 medals and awards) and also the Andronicos G. Kantsios Award and Siemens Award. Main research activities: the issues...
-
Chassis Dynamometer Testing of Ammonia Emissions from Light-Duty SI Vehicles in the Context of Emissions of Reactive Nitrogen Compounds
Publication -
The Effect of Pure RME and Biodiesel Blends with High RME Content on Exhaust Emissions from a Light Duty Diesel Engine
Publication -
A Study of RME-Based Biodiesel Blend Influence on Performance, Reliability and Emissions from Modern Light-Duty Diesel Engines
Publication -
Spatial and vertical distribution analysis of heavy metals in urban retention tanks sediments: a case study of Strzyza Stream
PublicationConcentrations of seven heavy metals (HMs): Zn, Cu, Pb, Cd, Ni, Cr, and Fe in core samples of bottom sediments from four retention tanks (RTs) located along the Strzyza Stream in northern Poland (Gdansk) were measured to obtain a general view of sediment quality. The recognition of contamination and potential environmental impacts is the main aim of this paper. A total of 96 sediment samples were collected from eight sampling sites...
-
Calix[4]arene-Thioamides as Ionophores for Transition and Heavy Metal Cations.
PublicationPochodne kaliks[4]arenów odgrywają ważną rolę jako materiał aktywny w membranowych elektrodach jonoselektywnych. Obecnie duży nacisk kładzie się na kontrolę stężeń kationów metali ciężkich, takich jak Pb, Cd, Hg, Cu w wodach naturalnych. Naszym zadaniem było zaprojektować i zsyntezować ligandy, które wykazują zdolność do wiązania kationów metali ciężkich i przejściowych. Synteza, struktury krystaliczne, ekstrakcja i właściwości...
-
Heavy stable charged particles search by novel pattern comparator processor
Publication -
The use of weight in motion data to heavy vehicles - pavement interaction analysis
PublicationWeight in motion (WIM) is the element of modern intelligent transport systems created to control commercial vehicles and to detect overloaded items. Because all of the vehicles crossing the WIM station are weighed and recognized, given data can be used to vehicle-pavement interaction analysis. The paper presents the results of analysis based on data from seven WIM stations localized in Motorway and National Roads in Poland. The...
-
Changes of heavy metals concentrations in the profile of sewage slugde in reed beds
PublicationW Polsce pojawiły się jedynie pilotowe obiekty trzcinowe unieszkodliwiające osady ściekowe. Natomiast w Danii są one eksploatowane w pełnej skali w dużych oczyszczalniach ścieków. Materiał badawczy pobrano z czterech duńskich obiektów o długim czasie eksploatacji wynoszącym od 7 do 15 lat. Obiekty te zlokalizowane były na terenie oczyszczalni: Rudkobing, Vallo, Naskov i Helsinge koło Kopenhagi obsługujących od 9 000 do 40 000 mieszkańców....
-
Stimulation of Heavy Metal Adsorption Process by Using a Strong Magnetic Field
Publication -
Remediation techniques for elimination of heavy metal pollutants from soil: A review
Publication -
Fluorescent imaging of heavy charged particle tracks with LiF single crystals
Publication -
Dynamical processes in a multi-motor gear drive of heavy slabbing mill
Publication -
Removal and retention of selected heavy metals in components of a hybrid wetland system
PublicationProwadzone badania z określeniem możliwosci retencjonowania metali ciężkichw systemie hybrydowej oczyszczalni hydrofitowej. Wykazano, że znaczna rete- ncja tych pierwiastków następowała w wyniku sorpcji. Przeprowadzona ekstra- kcyjna analiza sekwencyjna wykazała, że Pb2+ i Cu2+ zostały zakumulowane w połączeniach trwałych i nie powinny ulegać wymywaniu z oczyszczalni. Nato- miast Cd2+ wskutek sorpcji we frakcjach labilnych może...