Search
Filters
total: 836
Search results for: ORIENTED POROUS SCAFOLD
-
A facile approach to fabricate load-bearing porous polymer scaffolds for bone tissue engineering
PublicationBiodegradable porous scaffolds with oriented interconnected pores and high mechanical are load-bearing biomaterials for bone tissue engineering. Herein, we report a simple, non-toxic, and cost-effective method to fabricate high-strength porous biodegradable scaffolds, composed of a polymer matrix of polycaprolactone (PCL) and water-soluble poly (ethylene oxide) (PEO) as a sacrificial material by integrating annealing treatment,...
-
Hydroxyapatite coatings on porous ti and ti alloys
PublicationDeposition of hydroxyapatite coating on porous Ti and Ti alloys with electrochemical and biomimetic deposition approach is presented. The enhancement of phosphates deposition by well oriented and uniform titanium oxide nanotube array on the surface of titanium substrate is discussed.
-
New synthesis route of highly porous InxCo4Sb12 with strongly reduced thermal conductivity
PublicationHighly porous, In-filled CoSb3 skutterudite materials with an attractive thermoelectric figure of merit (ZT * 1) and corresponding dense samples were fabricated through the cost-effective method of reduction in oxides in dry hydrogen and the pulsed electric current sintering (PECS) method, respectively. The reduction process was described in detail using in situ thermogravimetric analysis of Co2O3, Sb2O3 and In(NO3)35H2O separately...
-
Two-phase flow in heterogeneous porous media with non-wetting phase trapping
PublicationThis article presents amathematical model describing flowof two fluid phases in a heterogeneous porous medium. Zaproponowano model matematyczny przepływu dwufazowego w drobnoziarnistym ośrodku porowatym zawierającym inkluzje gruboziarniste. Inkluzje charakteryzują się niższą wartością ciśnienia wejścia dla płynu niezwilżającego (np. powietrze, ropa naftowa) niż materiał podstawowy. Podczas nawadniania takiego ośrodka dochodzi do...
-
SERVICE-ORIENTED CYBERSPACE FOR IMPROVING CYBERSECURITY
PublicationThe paper presents a cyberspace model where different categories of IT services are offered and used largely. A general cybersecurity policy is considered and the corresponding cybersecurity strategies are shown. The role of such technologies as: Internet of Things, Cloud Computing and Big Data is analyzed in order to improve the cybersecurity of a cyberspace. A new kind of service oriented cyberspace is proposed and its main properties...
-
CDIO IN GDANSK: PEOPLE-ORIENTED STRATEGY
PublicationThe CDIO system implementation in Poland meets problems and Gdansk University of Technology (GUT) is still a single higher education institution in Poland accepted as the member of CDIO Initiative. The paper detects and characterizes the existing problems to be solved. In particular, the different groups of people are considered as supporters or fighters against CDIO idea, their attitudes being considered and applied strategy demonstrated. The...
-
Mashup Approaches for Improving Service Oriented Business Scenarios
PublicationTwo kinds of business scenarios are considered: application- and service-oriented. It is shown that the former are more flexible and easier reconfigurable for both traditional (human-oriented) and IT services. Moreover, complex IT services can be created by simple IT services using the modern mashup technology. It is the reason why such business scenarios can be modeled by BPMN in much easier ways. A simple example of a supply...
-
SERVICE ORIENTED SCENARIOS FOR SUPPORT ENTERPRISE PROJECT MANAGEMENT
PublicationIn the paper, a service oriented architecture is used to describe various scenarios of human-oriented enterprises. They can be modeled by BPMN to show basic information flow. We consider business scenarios to present another modeling solution called service orchestration or service mashup. That approach gives an opportunity for the right management through taking the best possible choice of services, or composition of services....
-
Evaluation of multimedia applications in a cluster oriented environment
PublicationIn the age of Information and Communication Technology (ICT), Web and the Internet have changed significantly the way applications are developed, deployed and used. One of recent trends is modern design of web-applications based on SOA. This process is based on the composition of existing web services into a single scenario from the point of view of a particular user or client. This allows IT companies to shorten product time-to-market....
-
Methodology of Constructing and Analyzing the Hierarchical Contextually-Oriented Corpora
PublicationMethodology of Constructing and Analyzing the Hierarchical structure of the Contextually-Oriented Corpora was developed. The methodology contains the following steps: Contextual Component of the Corpora’s Structure Building; Text Analysis of the Contextually-Oriented Hierarchical Corpus. Main contribution of this study is the following: hierarchical structure of the Corpus provides advanced possibilities for identification of the...
-
EXPERIENCE-ORIENTED SMART EMBEDDED SYSTEM
PublicationThe Experience-Oriented Smart Embedded System (EOSES) is proposed as a new technological platform providing a common knowledge management approach that allows mass embedded systems for experiential knowledge capturing, storage, involving, and sharing. Knowledge in the EOSES is represented as SOEKS, and organized as Decisional DNA. The platform is mainly based on conceptual principles from Embedded Systems and Knowledge Management....
-
Experience-Oriented Intelligence for Internet of Things
PublicationThe Internet of Things (IoT) has gained significant attention from industry as well as academia during the past decade. The main reason behind this interest is the capabilities of the IoT for seamlessly integrating classical networks and networked objects, and hence allows people to create an intelligent environment based on this powerful integration. However, how to extract useful information from data produced by IoT and facilitate...
-
OSC - domain oriented ontology creation system
PublicationOntologies are, as part of semantic web, a basic component to enrich content available in the Internet with a meaning understandable for computers. In this publication an architecture and functionality of a domain oriented web portal for collaborative creation and storage of ontologies is presented. The system is being created by Gdańsk University of Technology Electronics, Telecommunications and Informatics faculty's Department...
-
Towards Knowledge Sharing Oriented Adaptive Control
PublicationIn this paper, we propose a knowledge sharing oriented approach to enable a robot to reuse other robots' knowledge by adapting itself to the inverse dynamics model of the knowledge-sharing robot. The purpose of this work is to remove the heavy fine-tuning procedure required before using a new robot for a task via reusing other robots' knowledge. We use the Neural Knowledge DNA (NK-DNA) to help robots gain empirical knowledge and...
-
SMART SHOP SERVICES FOR BUILDING CUSTOMER-ORIENTED SCENARIOS
PublicationThe shops of today mostly support the customer by offering him or her products based on basic relationships between products viewed or ordered by users with similar tastes. This common approach may fail in many cases especially when the user does not have sufficient knowledge about the market, or when he or she wants to build a set of products in more than one shop. New categories of smart shop services are proposed in order to...
-
Three-dimensional conceptual model for service-oriented simulation
Publicationn this letter, we propose a novel three-dimensional conceptual model for an emerging service-oriented simulation paradigm. The model can be used as a guideline or an analytic means to find the potential and possible future directions of the current simulation frameworks. In particular, the model inspects the crossover between the disciplines of modeling and simulation, service-orientation, and software/systems engineering. Finally,...
-
A method for evaluating durability of porous slide bearings
PublicationThe article presents the structures of porous bearings bushes and greasy lubricants, and the similarity criterion resulting from this structures. A phisical model is proposed which describes the operation of the porous slide bearing bush taking into account, via analogy, the phenomena taking place in the grease lubricant nodes instead of those observed in the bush structures.Included are the result of experimental tests of three...
-
Advanced Porous Materials
Journals -
3D porous graphene-based structures- synthesis and applications
PublicationPorous carbon-based materials are of the great industrial and academic interest due to their high surface area, low density, good electrical conductivity, chemical inertness and low cost of fabrication. Up to now, the main approach to obtain porous carbon structures has involved the pyrolysis of carbonaceous natural or synthetic precursors. After the isolation of graphene, the interest in 3D porous graphene-based structures (called...
-
Design-Oriented Constrained Modeling of Antenna Structures
PublicationFast surrogate models are crucially important to reduce the cost of design process of antenna structures. Due to curse of dimensionality, standard (data-driven) modeling methods exhibit serious limitations concerning the number of independent geometry parameters that can be handled but also (and even more importantly) their parameter ranges. In this work, a design-oriented modeling framework is proposed in which the surrogate is...
-
Service Oriented Computing and Applications
Journals -
Journal for Person-Oriented Research
Journals -
A review: Fabrication of porous polyurethane scaffolds
PublicationThe aim of tissue engineering is the fabrication of three-dimensional scaffolds that can be used for the reconstruction and regeneration of damaged or deformed tissues and organs. A wide variety of techniques have been developed to create either fibrous or porous scaffolds from polymers, metals, composite materials and ceramics. However, the most promising materials are biodegradable polymers due to their comprehensive mechanical...
-
Experience oriented enhancement of smartness for Internet of Things
PublicationIn this paper, we propose a novel approach, the Experience-Oriented Smart Things that allows experiential knowledge discovery, storage, involving, and sharing for Internet of Things. The main features, architecture, and initial experiments of this approach are introduced. Rather than take all the data produced by Internet of Things, this approach focuses on acquiring only interesting data for its knowledge discovery process. By...
-
Tribological model of porous bearings with particular attention given to the lubricant lubricity
PublicationThe friction and wear problems, accompanying all the tribological systems, lead to reduced service life. In order to prevent such situation, it is necessary to maintain fluid friction, which improves durability of all friction nodes in a tribological system. In the paper, the tribological system consists of porous bearings and the model deals with their weakest spots - the oil outflow points in the porous wall. A kinetic model...
-
Formation of Porous Structure of the Metallic Materials Used on Bone Implants
PublicationResearch on improvement of structure and fabrication methods of the bone implants are carried out for many years. Research are aimed to shape the structures, that will have a Young's modulus value similar to the value of the human bones Young's modulus. Depending on theporosity, Young's moduli can even be tailored to match the modulus of bone closer than solid metals can, thus reducing the problems associated with stress shielding...
-
Electrochemicalsynthesis of 3D nano-/micro-structured porous polypyrrole
PublicationIn this work, electrosynthesis of electroactive, 3D nano-/micro-structured porous polypyrrole film is presented. The PPy film was synthesized potentiostatically in a one-step process from aqueous solution of pyrrole and lithium perchlorate. The growth mechanism of such structure included: the formation of typical globular PPy film, followed by the formation of the PPy fibers, which then took part in the formation of 3D highly porous...
-
High temperature corrosion and corrosion protection of porous Ni22Cr alloys
PublicationIn this work corrosion kinetics of the porous IN625 alloy is studied in the temperature range of 700 °C – 800 °C in air and humidified hydrogen for up to 1000 hours. Moreover, an effective and simple method of reducing corrosion rates of porous alloys by the infiltration of the rare earths elements is shown. Modification by the yttrium containing precursor reduces the corrosion rate by a factor of 50 in air at 700 °C so that the...
-
YSZ Thin film deposited on porous substrate by spray pyrolysis
PublicationIn this work the results of deposition of YSZ layer on a porous substrate using an ultrasonic Spray Pyrolysis are presented.
-
Bioactive core material for porous load-bearing implants
PublicationSo far state of knowledge on biodegradable materials is reviewed. Among a variety of investigated materials, those composed of polymers and ceramics may be considered as only candidates for a core material in porous titanium alloy. The collagen and chitosan among natural polymers, polyhydroxy acids among synthetic polymers, and hydroxyapatite and tricalcium phosphate among ceramics are proposed for further research. Three essential...
-
Ontology Oriented Approach to Service Selection and Invocation in Complex Context Analysis
PublicationContext-aware applications running in the intelligent space are taken into account and their execution in the service oriented environment is considered. It has been presented where and how SOA services can be utilized during their execution: to analyze current context of the application and to support execution of strictly determined actions suitable for that context. The proposed mechanism of context-aware service selection and...
-
Analysis of the impact of AOP on source code quality: Paradox of aspect-oriented separation of concerns
PublicationAlmost four decades ago, Parnas advocated modularity for the sake of changeability, independent development, and comprehensibility. The recipe for modularization is to define a clean interface, hide an implementation detail, keep low coupling and high cohesion. Although modules have taken many forms over the years from functions and procedures to classes, no form has been capable of expressing so-called crosscutting concerns in...
-
Modeling Object Oriented Systems via Controlled English Verbalization of Description Logic
PublicationThe need for formal methods for Object Oriented (OO) systems resulted in methods like UML and Lepus3 that are de-facto graphical languages equipped with formal tools that are able to handle the design of OO systems. However, they lack precise semantics which might lead to problems, such as inconsistencies or redundancies. On the other hand, to our knowledge, there is no approach that allows one to understand and follow the requirements...
-
Pool boiling of nanofluids on rough and porous coated tubes: experimental and correlation
PublicationThe paper deals with pool boiling of water-Al2O3 and water- Cu nanofluids on rough and porous coated horizontal tubes. Commercially available stainless steel tubes having 10 mm outside diameter and 0.6 mm wall thickness were used to fabricate the test heater. The tube surface was roughed with emery paper 360 or polished with abrasive compound. Aluminium porous coatings of 0.15 mm thick with porosity of about 40% were produced by...
-
The scanning tunnelling micrographs of highly oriented pyrolytic graphite
Open Research DataThe dataset contains the results imaging of a sample of highly oriented pyrolytic graphite obtained using scanning tunneling microscopy. The above variant of scanning probe microscopy is one of the most convenient research techniques at atomic scales. The file contains images corresponding to increasing magnifications from the 1 um scale to a few nanometers....
-
Histogram of Oriented Gradients with Cell Average Brightness for Human Detection
PublicationA modification of the descriptor in a human detector using Histogram of Oriented Gradients (HOG) and Support Vector Machine (SVM) is presented. The proposed modification requires inserting the values of average cell brightness resulting in the increase of the descriptor length from 3780 to 3908 values, but it is easy to compute and instantly gives ≈ 25% improvement of the miss rate at 10‒4 False Positives Per Window (FPPW). The...
-
Polymeric porous membranes as solid support and protective material in microextraction processes: A review
PublicationPolymeric porous membranes have proven to be a versatile and efficient material for microextraction processes. In analytical practice, they are used both as a solid support and as a protective medium for improved sample preparation in various analytical applications. Polymeric porous membranes offer unique advantages in microextraction due to their large surface area and controllable pore size, eliminating interfering effects from...
-
The best porous asphalt pavement in Sweden so far
PublicationIn 2010 a double-layer porous asphalt concrete (DPAC) pavement was constructed in various versions on the E4 motorway through the Swedish city Huskvarna. As a result of a court decision the Swedish Transport Administration had to reduce noise emission by applying a low noise road surface that would reduce A-weighted noise levels by 5 dB, as an average. Earlier experience in Sweden indicated that it was possible to obtain a high...
-
Glass-ceramic joining of Fe22Cr porous alloy to Crofer22APU: interfacial issues and mechanical properties
PublicationThis work deals with the joining of porous Fe22Cr ferritic stainless steel to a dense Crofer22APU plate by using a silica-based, Ba-containing glass-ceramic. The chemical and interfacial stability and the mechanical properties of the joints were evaluated before and after thermal ageing at 700 ◦C for 500hrs. The sintering behaviour of the glass was assessed by using heating stage microscopy (HSM) to study the influence of a porous...
-
Highly porous nanoberyllium for X-ray beam speckle suppression
PublicationThe speckle suppressor device containing highly porous nanoberyllium is proposed for manipulating with the spatial coherence length and removing undesirable speckle structure during the imaging experiments. We report a special device called the speckle suppressor, which contains the highly porous nanoberyllium plate, compacted from both sides by two beryllium windows. By insertion the speckle suppressor in the X-ray beam it allows...
-
Functional Components Enhancing Clients Attractiveness and Commercial Profitability of Internet Tourist-oriented Commercial Websites
PublicationTourism constitutes an important branch of economy in Mediterranean countries. Great number of people spend or are planning to spend their free time in the Mediterranean area. Extensive rentals of private apartments or houses for individual persons and their families as well as all kinds of services provided for tourists, in result, generate substantial economical incomes. Variety and diversity of offers of private accommodations...
-
Data obtained by computation for X-ray focusing using oriented Gaussian beams
Open Research DataThe propagation of X-ray waves through an optical system consisting of several X-ray refractive lenses is considered. Gaussian beams are exact solutions of the paraxial equation. The Helmholtz equation describes the propagation of a monochromatic electromagnetic wave. Since the widths of the beams are much larger than the wavelength of X-rays, Gaussian...
-
Modeling the impact of discretizing rotor angular position on computation of field-oriented current components in high speed electric drives
PublicationModern drives consist of alternating current electric motors, and the field-oriented control (FOC) of such motors enables fast, precise, and robust regulation of a drive's mechanical variables such as torque, speed, and position. The control algorithm, implemented in a microprocessor, requires feedback from motor currents, and the quality of this feedback is essential to a drive's control properties. Motor phase currents are sampled...
-
Sensorless Field Oriented Control of Five Phase Induction Motor with Third Harmonic Injection
PublicationIn this paper, a sensorless field oriented control system of five-phase induction machine with the 3rd harmonic rotor flux is presented. Two vector models, α1-β1 and α3-β3, were transformed into d1-q1, d3-q3 models oriented in rotating frames, which correspond to the 1st and 3rd harmonic plane respectively. The authors proposed the linearization of the model in d-q coordinate frames by introducing a new variable “x” which is proportional...
-
Ontology oriented threat detection system
PublicationW niniejszym artykule przedstawiony jest projekt opartego o ntologię systemu wykrywania zagrożeń w różnego typu monitorowanych środowiskach (OOTDS). Zakłada się, że umieszczone w środowisku czujniki na bieżąco dostarczają systemowi zdarzeń odzwierciedlających zmiany zachodzące w środowisku. Korzystając z sieci asynchronicznych bloków rosnącej złożoności OOTDS dokonuje analizy otrzymanych zdarzeń. Bloki wstępnego przetwarzania konwertują...
-
A service-oriented approach to the identification of IT Risk
PublicationArtykuł przedstawia ogólne podejście do identyfikacji ryzyka eksploatacji systemów informatycznych, które obejmuje bezpieczeństwo, ochronę, prywatność oraz uzależnienie. Podejście oparte jest na badaniu trybów awarii usług dostarczanych użytkownikom przez oprogramowanie. Identyfikacja ryzyka na podstawie przeglądu usług uzupełniana jest listami kontrolnymi wyprowadzonymi ze standardów, a także klasycznymi technikami analizy bezpieczeństwa...
-
High temperature corrosion resistance of porous hastelloy alloy
PublicationTo further understand the suitability of Ni-Cr-base alloy for solid oxide fuel cell (SOFC), a commercial Ni-Cr-Fe-Mo alloy, Hastelloy X was selected and evaluated for oxidation behaviour under high temperature conditions. HastelloyX was chosen due to its unusual resistance to oxidizing, reducing and neutral atmospheres. For long term stability of metal supported fuel cell, the corrosion resistance plays a vital role and must be...
-
Nanotubular oxide layers and hydroxyapatite coatings on porous titanium alloy Ti13Nb13Zr
PublicationThe surface condition of an implant has a significant impact on response occurring at the implant-biosystem border. The knowledge of physical-chemical and biological processes allows for targeted modification of biomaterials to induce a specified response of a tissue. The present research was aimed at development of technology composing of obtaining the nanotube oxide layers on a porous titanium alloy Ti13Nb13Zr, followed by the...
-
Numerical analysis of vacuum drying of a porous body in the integrated domain
Publicationn the present study, the vacuum drying process of an apple slice is numerically modeled based on a control volume method. Transient two-dimensional Navier– Stokes, energy, moisture, and Luikov equations are solved by numerical coding (Fortran) to simulate the simultaneous heat and mass transfer in the ambient and apple slice, respectively. The privilege of using Luikov's model is that the capillary forces are considered, and a...
-
Advanced super-hydrophobic polymer-based porous absorbents for the treatment of oil-polluted water
PublicationThe threat of environmental pollution caused by spilled oil is rapidly increasing along with the expansion of oil exploration, the development of maritime activities and industrial growth. Oil spill incidents usually affect seriously the ecosystem and human life. Therefore, the treatment and recovery of the oil spill have been considered as an ultra-important issue to protect the environment and to minimize its negative impacts...