Filters
total: 638
-
Catalog
Search results for: BETON POROWATY
-
Wpływ porowatości na jakość powierzchni ceramicznych po docieraniu
PublicationW materiale przedstawiono wyniki badań własnych, które dotyczyły problemu oceny jakości powierzchni porowatej powłoki ceramicznej po docieraniu technologicznym. Zauważono, że do oceny stereometrii tego typu powierzchni, przydatnym jest stosowanie niektórych parametrów chropowatości wyznaczonych na podstawie krzywej udziału nośnego. Podjęto także próbę ilościowej oceny wpływu porowatości powłoki ceramicznej na wybrane wartości parametrów...
-
Badania spękań niskotemperaturowych podbudów a AC WMS na nowobudowanej autostradzie A1 w Polsce. Część 1 - Badania terenowe i laboratoryjne
PublicationW artykule przedstawiono problem niskotemperaturowych spękań poprzecznych, które powstały na podbudowach z betonu asfaltowego o wysokim module sztywności AC WMS. Liczne spękania niskotemperaturowe powstały na analizowanych podbudowach AC WMS podczas okresu zimowego w 2012 r. zanim została zakończona cała konstrukcja nawierzchni. Spękania powstały zarówno na połączeniach technologicznych, jak i pomiędzy nimi. Problem taki nie wystąpił...
-
Underwater Local Cavity Welding of S460N Steel
PublicationIn this paper, a comparison of the mechanical properties of high-strength low-alloy S460Nsteel welded joints is presented. The welded joints were made by the gas metal arc welding (GMAW)process in the air environment and water, by the local cavity welding method. Welded joints were testedfollowing the EN ISO 15614-1:2017 standard. After welding, the non-destructive—visual, penetrant,radiographic, and ultrasonic (phased array) tests...
-
A constitutive law for concrete with smooth transition from continuous into discontinuous cracks’ description
PublicationPaper presents a constitutive model for concrete that combines a continuous and discontinuous crack’s description to simulate the concrete under tensile dominated loads. In a continuum regime, two different constitutive laws were used. First, a plasticity model with the Rankine failure criterion and an associated flow rule was used. Second, a constitutive law based on isotropic damage mechanics was formulated. Both model alternatives...
-
State of the art report on fabric formwork
PublicationPrzedstawiono technologię wytwarzania i kształtowania elementów betonowych wylewanych w wiotkich formach. Omówiono szerokie zastosowanie takich elementów umożliwiające swobodne kształtowanie przestrzeni. Wskazano na możliwości wykorzystania omawianej technoloii betonowania w nietypowych warunkach, np. w pracach podwodnych. Zwrócono uwage a oszczędności w zastąpieniu drewnianych lub stalowych form, a także polepszenie własności...
-
Badania eksperymentalne słupów CFST
PublicationW pracy przedstawiono badania eksperymentalne słupów osiowo ściskanych. Rozważa się efektywność poprzecznego sprężenia betonowego rdzenia słupa przez stalową rurę lub uzwojenie dla następujących typów słupów: CFST, uzwojonych i zwykłych żelbetowych. Opisane w referacie parametry badań eksperymentalnych to: stopień zbrojenia, wytrzymałość betonu, sposób obciążania. Zaprezentowano wyniki dotyczące nośności i zachowania pokrytycznego...
-
Obtaining and Characterization of the PLA/Chitosan Foams with Antimicrobial Properties Achieved by the Emulsification Combined with the Dissolution of Chitosan by CO2 Saturation
PublicationA new method of obtaining functional foam material has been proposed. The materials were created by mixing the poly lactic acid (PLA) solution in chloroform, chitosan (CS) dissolved in water saturated with CO2 and polyethylene glycol (PEG), and freeze-dried for removal of the solvents. The composite foams were characterized for their structural (SEM, FT-IR, density, porosity), thermal (DSC), functional (hardness, elasticity, swelling...
-
Obtaining and Characterization of the PLA/Chitosan Foams with Antimicrobial Properties Achieved by the Emulsification Combined with the Dissolution of Chitosan by CO2 Saturation
PublicationA new method of obtaining functional foam material has been proposed. The materials were created by mixing the poly lactic acid (PLA) solution in chloroform, chitosan (CS) dissolved in water saturated with CO2 and polyethylene glycol (PEG), and freeze-dried for removal of the solvents. The composite foams were characterized for their structural (SEM, FT-IR, density, porosity), thermal (DSC), functional (hardness, elasticity, swelling...
-
Application of Artificial Neural Networks to Predict Insulation Properties of Lightweight Concrete
PublicationPredicting the properties of concrete before its design and application process allows for refining and optimizing its composition. However, the properties of lightweight concrete are much harder to predict than those of normal weight concrete, especially if the forecast concerns the insulating properties of concrete with artificial lightweight aggregate (LWA). It is possible to use porous aggregates and precisely modify the composition...
-
Zastosowanie lasera femto - sekundowego do modyfikacji fotoelektrody TiO2 w barwnikowym ogniwie fotowoltaicznym,
PublicationW pracy przedstawiono wyniki badań dla barwnikowych ogniw fotowoltaicznych, w których złącze półprzezroczysta elektroda przewodząca (TCO)/porowata warstwa ditlenku tytanu zostało zmodyfikowane przy użyciu wiązki lasera femtosekundowego. Przeprowadzone badania charakterystyki prądowo-napięciowej oraz elektrochemicznej spektroskopii impedancyjnej pozwoliły na opisanie wpływu modyfikacji granicy faz na parametry elektryczne urządzeń....
-
Nucleate pool boiling modelling and experimental investigation : chapter 7
PublicationOmówiono wpływ powłoki porowatej nanoszonej na całą powierzchnię rurki lub jej fragment na osiągany współczynnik przejmowania ciepła, krytyczne gęstości strumienia ciepła, a także obwodowy rozkład temperatury przy wrzeniu pęcherzykowym na zewnętrznej powierzchni poziomej rurki.Przedstawiono wyniki badań częstotliwości odrywania się pęcherzyków oraz pól prędkości wokół wzrastającyh i unoszących się pęcherzyków przy wrzeniu z pojedynczych...
-
Modelling water flow in unsaturated porous media: Accounting for nonlinear permeability and material heterogeneity
PublicationW pracy przedstawiono problematykę matematycznego modelowania przepływów w nienasyconych ośrodkach porowatych, ze szczególnym uwzględnieniem dwóch aspektów. Pierwszym z nich jest obliczanie średniego współczynnika przewodności hydraulicznej między węzłami siatki w numerycznym rozwiązaniu równania przepływu nienasyconego. Drugim zagadnieniem jest wpływ lokalnej zmienności parametrów ośrodka porowatego (współczynnika przewodności...
-
Selective Laser Melting of Ti Alloy for Manufacturing The Prosthetic Elements
PublicationThe selective laser melting (SLM) is the additive manufacturing method of custom-designed parts. The used materials and the applications are various, including medicine. The titanium and its alloys are materials for which the dimensional quality, surface smoothness and no or extremely low porosity are difficult to reach. In this paper, the successful attempt to obtain by SLM the individually designed prosthetic bridges is described....
-
Uszkodzenia korozyjne betonowego podtorzą zlokalizowanego na terenie zakładu przemysłowego
PublicationW artykule opisano uszkodzenia betonowego podtorza w miejscu rozładunku produktów ropopochodnych na tere-nie zakładu przemysłowego. Beton płyty podtorza uległ degradacji w wyniki wieloletniej eksploatacji polegającej między innymi na jego cyklicznym zalewaniu produktami ropopochodnymi w trakcie rozładunku i załadunku cystern kolejowych. Przeprowadzone w okresie wcześniejszym prace naprawcze polegające na reprofilacji wierzchniej...
-
Correlation between performance properties of asphalt mixes and properties of bituminous binder.
PublicationPrzeprowadzono badania betonów asfaltowych, gdzie zmienną był tylko rodzaj asfaltu. W badaniach określono podstawowe cechy asfaltów. Dla betonów asfaltowych badano takie właściwości jak: odporność na deformacje trwałe, odporność na starzenie, odporność na działanie wody i mrozu oraz właściwości niskotemperaturowe. Wynikiem analiz są przedstawione w referacie najbardziej skorelowane cechy asfaltu z właściwościami betonu asfaltowego.
-
Zastosowanie spektroskopii ATR/FT-IR w badaniach polimerów zawierających ugrupowania pirolidonowe
PublicationW niniejszej pracy prezentujemy syntezę i analizę właściwości fizyko-chemicznych porowatych mikrosfer zawierających ugrupowania pirolidonowe otrzymanych technika suspensyjną. Ugrupowania pirolidonowe zostały wprowadzone w sieć polimerową w wyniku bezpośredniej reakcji z 1-winylo-2-pirolidonem (VP) z dimetakrylanem glikolu etylenowego (DMGE) oraz poprzez modyfikację pirolidonem grup epoksydowych obecnych w strukturze kopolimeru...
-
An investigation on wetting of porous materials
PublicationPośrednie metody oceny zdolności zwilŜania drobnych cząstek lub materiałów porowatych wymagają wyboru cieczy odniesienia, dla której kąt zwilŜania jest równy zeru. W badaniach własnych zastosowanometodę wzniesienia kapilarnego oraz metodę flotacji filmowej dla układów mikrokulki szklane-woda i mikrokulki szklane-dekan. Uzyskane dane dla cieczy odniesienia i dla cieczy badanej wprowadzano dozmodyfikowanego równania Washburn'a i...
-
Możliwoości ograniczania rozprzestrzeniania się pożarów pojazdów, przy zastosowaniu nowego typu nawierzchni drogowej
PublicationW artykule przedstawiono możliwość utrudnienia rozprzestrze niania się pożaru przy wycieku paliwa poprzez zastosowanie specjalnej, porowatej\ nawierzchni drogowej. Poza wieloma niewątpliwymi zaletami nawierzchni wykonywanej m.in. z agregatu powstałego w wyniku recyclingu zużytego ogumie nia samochodowego, możliwość zatrzymania rozlanego paliwa na ograniczonym obszarze i jego późniejsze stopniowe wypalenie się może znacząco przyczynić...
-
Diagnostyka cienkościennych żelbetowych sklepień kolebkowych w budynku zabytkowym. Część II
PublicationW artykule przedstawiono opis oraz wyniki oceny stanu technicznego konstrukcji przekrycia Hali Głównej Dworca Kolejowego Gdańsk Główny. Ze względu na prowadzone prace związane z remontem kapitalnym Dworca Głównego PKP w Gdań- sku zaistniała konieczność przeprowadzenia rewitalizacji poddasza Hali Głównej, obejmująca między innymi jego termomodernizację (ocieplenie wysklepek) oraz zabezpieczenie elementów wiązarów dachowych przed...
-
Wpływ redukcji grubości elementu betonowego na nośność kotew metalowych w betonie
PublicationGrubość elementu betonowego przyjęta z warunków wykonawczych, bez negatywnego wpływu naroży i krawędzi, jest wystarczająca do osiągnięcia nośności charakterystycznej jak dla elementu o standardowej wysokości minimalnej. Nie ma tu obawy o przedwczesne zniszczenie betonu przez rozłupanie. Aby uzyskać wymaganą nośność z uwzględnieniem wzajemnego rozstawu łączników i wpływem obecności krawędzi elementu należy przeprowadzić dodatkowe...
-
Awaria wsporników w konstrukcji stropu hali przemysłowej
PublicationW artykule opisano stan awaryjny konstrukcji wsporczej żelbetowego stropu w hali przemysłowej. Zarysowaniu uległy wsporniki belek gerberowskich w miejscach dylatacji budynku. Przeprowadzone badania stanu istniejącego, wytrzymałości betonu i analiza wytężenia zarysowanych elementów pozwoliły określić przyczyny uszkodzeń. Ustalono też stopień zagrożenia bezpieczeństwa konstrukcji a w miejscach szczególnie osłabionych podano sposób...
-
Comparison of continuous and discontinuous constitutive models to simulate concrete behaviour under mixed mode failure conditions
PublicationW artykule porównano modele MES ciągłe i nieciągłe do symulacji zachowania betonu w warunkach mieszanego zniszczenia. W ramach modeli ciągłych zastosowano modele sprężysto-plastyczne oraz modele z redukcją sztywności sprężystej i nielokalnym osłabieniem. W ramach modeli nieciągłych zastosowano XFEM. Przedmiotem obliczeń były strefy lokalizacji i rysy w warunkach mieszanego zniszczenia wg testu doświadczalnego Nooru-Mohameda.
-
New matrix-free reference materials of volatile compounds - application of glass fibres as support materials for surface compounds
PublicationTechnika termicznego rozkładu związków powierzchniowych, znana od ponad dziesięciu lat, ulega ciągłym udoskonaleniom w celu otrzymywania coraz szerszej gamy wzorców analitycznych występujących na coraz niższych poziomach stężeń. Początkowo w roli nośnika stosowano żel krzemionkowy, który w trakcie dalszych faz rozwoju tej techniki zastąpiono kolejno szkłem porowatym, a następnie włóknem szklanym. W ostatnim czasie uproszczono układ...
-
PROJEKTOWANIE NAWIERZCHNI2022-23
e-Learning CoursesKurs przewidziany dla studentów VII semestru studiów inżynierskich kierunku budownictwo specjalności drogowej. Podczas kursu omawiane są podstawowe metody projektowania konstrukcji nawierzchni drogowych, lotniskowych i portowych w technologii asfaltowej, betonu cementowego oraz kostek brukowych. Kurs obejmuje również wstęp i zarys zaawansowanego projektowania mechanistyczno-empirycznego.
-
PROJEKTOWANIE NAWIERZCHNI2023-24
e-Learning CoursesKurs przewidziany dla studentów VII semestru studiów inżynierskich kierunku budownictwo specjalności drogowej. Podczas kursu omawiane są podstawowe metody projektowania konstrukcji nawierzchni drogowych, lotniskowych i portowych w technologii asfaltowej, betonu cementowego oraz kostek brukowych. Kurs obejmuje również wstęp i zarys zaawansowanego projektowania mechanistyczno-empirycznego.
-
Electrochemical investigations of conductive coatings applied as anodes in cathodic protection of reinforced concrete.
PublicationW pracy przedstawiono rezultaty badań elektrochemicznych polimerów przewodzących z pigmentem grafitowym. Wyznaczono parametry elektrochemiczne badanych powłok w trakcie długotrwałej polaryzacji zbrojonego betonu. W oparciu o pomiary impedancyjne wyznaczono parametry elektrochemiczne powłok przewodzących. Wykazano, że badane powłoki mogą być stosowane w ochronie katodowej żelbetu. Badania wykazały, że optymalne stężenie grafitu...
-
Procedura wyznaczania krzywej interakcji dla przekroju prostokątnego metodą uproszczoną
PublicationW artykule opisano w dokładny sposób procedurę wyznaczenia krzywej interakcji dla przekroju prostokątnego według założeń metody uproszczonej (przy przyjęciu prostokątnego rozkładu naprężeń w strefie ściskanej betonu). Krzywą graniczną można wykonać w pełnym zakresie – dla rozciągania zarówno dolnych jak i górnych włókien przekroju. Dodatkowo autor przedstawia współczynniki wykorzystania stali, dzięki czemu możliwym jest uzyskanie...
-
Degradacja stropu nad kotłownią po okresie wieloletniej eksplatacji oraz sposób jego naprawy
PublicationW artykule przedstawiono opis usterek stropu nad kotłownią będącego jednocześnie płytą przejazdu pomiedzy yulica a zapleczem budynku. Wieloletni okres eksploaatcji stropu oraz utrudnione warunki eksploatacyjne doprowadziły do ubytków korozyjnych zarówno betonu, jak równiez prętów zbrojeniowych. W pracy przedstawiono rozwiązania projektowe kompleksowego usunięcia występujących usterek stropu polegająće na wzmocnieniu zarówno monolitycznych...
-
Opinia ekspercka w przedmiocie równoważności studni betonowych w stosunku do studnio z tworzyw sztucznych, przy uwzględnieniu ich zastosowania w specyficznych na Żuławach warunkach gruntowo - wodnych, ze szczególnym uwzględnieniem siły wyporu. Do zadania inwestycyjnego: "Budowa kanalizacji sanitarnej w miejscowości Drewnica, Przemysław, Żuławki - bud. 821
PublicationProblem właściwego wyboru kanalziacyjnej studzienki rewizyjnej pracującej w skrajnie uciążliwych warunkach posadowienia (Żuławy Wiślane). Problem braków w dokumentacji projektowej - konieczność doprecyzowania ograniczeń wynikających ze szczególnycvh warunków posadowienia. Niejednoznaczność pojęcia ''studzienka z tworzywa'' w aspekcie współpracy z nawodnionym podłożem. Studzienka z betonu jako korzystna alternatywa dla tworzyw w...
-
Problematyka interpretacji pomiarów rozkładu siły osiowej w trzonie pala podczas próbnych obciążeń statycznych
PublicationCharakterystyka problemów występujących przy pomiarach rozkładu siły w palach podczas próbnych obciążeń, realizowanych za pomocą strunowych czujników ekstensometrycznych. Ustosunkowanie się do dyskusji na temat interpretacji wyników pomiarów z uwzględnieniem wpływu zmienności modułu betonu i przekroju pala z głębokością oraz wpływu sił resydualnych. Propozycja metody identyfikacji wartości siły rezydualnej w palu i prezentacja...
-
Nanosilver-loaded PMMA bone cement doped with different bioactive glasses – evaluation of cytocompatibility, antibacterial activity, and mechanical properties
PublicationNanosilver-loaded PMMA bone cement (BC-AgNp) is a novel cement developed as a replacement for conventional cements. Despite favorable properties and antibacterial activity, BC-AgNp still lacks biodegradability and bioactivity. Hence, we investigated the doping with bioactive glasses (BGs) to create a new bioactive BC characterized by time-varying porosity and gradual release of nanosilver. The BC Cemex was used as the base material...
-
Effect of aeration of antibiotic-loaded bone cement on its properties and bactericidal effectiveness
PublicationBACKGROUND: Antibiotic-loaded bone cements are now widely used in medicine. They are able to locally deliver antibiotic particles and they allow treat or protect against infection. It is assumed that the bactericidal effectiveness of bioactive bone cements depend on the parameters of its production. Hence, the aim of this study was to check the effect of aeration of bone cement before mixing the components on its properties as...
-
Application of shifted Chebyshev polynomial-based Rayleigh–Ritz method and Navier’s technique for vibration analysis of a functionally graded porous beam embedded in Kerr foundation
PublicationPresent study is dealt with the applicability of shifted Chebyshev polynomial based Rayleigh-Ritz method and Navier’s technique on free vibration of Functionally Graded (FG) beam with uniformly distributed porosity along the thickness of the beam. The material properties such as Young’s modulus, mass density, and Poisson’s ratio are also considered to vary along the thickness of the FG beam as per the power-law exponent model....
-
Rotational Molding of Linear Low-Density Polyethylene Composites Filled with Wheat Bran
PublicationApplication of lignocellulosic fillers in the manufacturing of wood polymer composites (WPCs) is a very popular trend of research, however it is still rarely observed in the case of rotational molding. The present study aimed to analyze the impact of wheat bran content (from 2.5 wt.% to 20 wt.%) on the performance of rotationally-molded composites based on a linear low-density polyethylene (LLDPE) matrix. Microscopic structure...
-
Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens
PublicationThis study presents the comparison of microstructural and durability characteristics of 3D printed concrete (3DPC) depending on its production method (printing or casting). Printed samples with different numbers of layers, as well as a cast specimen with an identical mix composition, were produced and compared, with their microstructural pore and solid characteristics quantitatively and qualitatively investigated. For this purpose,...
-
Wykorzystanie metody wzniesienia kapilarnego do pomiarów zwilżalności układów rzeczywistych
PublicationPrzeprowadzono pomiary zarówno na układzie modelowym - mikrokulkach szklanych, jak i na różnorodnych układach rzeczywistych - katalizatorach, wypełnieniach, sorbentach, niezależnie od stabilności ich struktury, czy oddziaływań z cieczą badaną. W niniejszej pracy skupiono się przede wszystkim na opracowaniu metody pomiaru kąta zwilżania materiałów porowatych. Zaproponowano udoskonaloną metodę wyznaczania cieczy wzorcowej w pomiarach...
-
Influence of Ultrasound on the Characteristics of CaP Coatings Generated Via the Micro-arc Oxidation Process in Relation to Biomedical Engineering
PublicationOver the past decade, bone tissue engineering has been at the core of attention because of an increasing number of implant surgeries. The purpose of this study was to obtain coatings on titanium (Ti) implants with improved properties in terms of biomedical applications and to investigate the effect of ultrasound (US) on these properties during the micro-arc oxidation (MAO) process. The influence of various process parameters, such...
-
Fatigue of titanium alloy Ti6Al4V with diamond structure obtained by Laser Power Bed Fusion method
PublicationThis paper presents the results of fatigue tests conducted on Ti6Al4V titanium alloy with diamond structure obtained by the Laser Power Bed Fusion method. Samples used in tests were printed with porosities: 81%, 73%, 50%, 34% and near-zero porosity. Samples were subjected to cyclic tests with a constant stress amplitude. The number of cycles until sample failure was registered. Obtained fatigue test results made it possible to...
-
Degradacja i uszkodzenia podbudowy jako przyczyny awarii betonowych posadzek przemysłowych
PublicationPosadzki i nawierzchnie betonowe doznają podczas użytkowania zróżnicowanych w swojej skali i czasie degradacji takich jak spękania, zarysowania i klawiszowanie płyt. Część z tych uszkodzeń jest spowodowana wadami wykonania, niską jakością betonu lub błędami projektowymi płyty konstrukcyjnej, ale w znacznej części jest to związane z wadliwą podbudową. Podbudowa jest bowiem istotnym elementem składowym posadzki, zapewniającym wymaganą...
-
ANALIZA SCZEPNOŚCI MIĘDZYWARSTWOWEJ DWUWARSTWOWO WBUDOWANEJ PODBUDOWY ASFALTOWEJ NA ODCINKU KM 335+946 – 356+850 STR. P ORAZ JEJ WPŁYW NA TRWAŁOŚĆ KONSTRUKCJI NAWIERZCHNI „Budowa mostu przez rzekę Nogat w Malborku wraz z dojazdami w ciągu dróg krajowych nr 22 i 55"
PublicationCelem pracy jest ocena jakości połączenia dwóch warstw technologicznych podbudowy z betonu asfaltowego AC 22 35/50 o całkowitej grubości 18 cm oraz wpływ tego połączenia na trwałość konstrukcji nawierzchni drogi na odcinku km 355+946 – 356+850 str. P, wbudowanej w ramach realizacji kontraktu „Budowa mostu przez rzekę Nogat w Malborku wraz z dojazdami w ciągu dróg krajowych nr 22 i 55”.
-
Electrical and structural properties of Nb-doped SrTiO3
PublicationNiobium-doped strontium titanate synthesized via conventional solid-state reaction has been studied. Influence of niobium content on the lattice parameters and electrical conductivity has been reported. Various reduction conditions have been investigated. For samples reduced in hydrogen at 1400°C, a transition from thermally activated to metallic behavior has been observed. Maximum electrical conductivity (ca. 55 Scm−1 at 650°C)...
-
High Temperature Corrosion Evaluation of Porous Hastelloy X Alloy in Air and Humidified Hydrogen Atmospheres
PublicationIn this work a commercially available porous Hastelloy X alloy is characterized in terms of high temperature corrosion resistance. The alloy was oxidized in the temperature range from 500C to 900C in air and humidified hydrogen for 100 hours. Corrosion rates and porosity changes were measured. Microstructural characterization was performed using X-ray diffractometry and scanning electron microscopy. Results show that porous alloys...
-
Modelling of Hydraulic Fracturing in Rocks in Non-isothermal Conditions Using Coupled DEM/CFD Approach with Two-Phase Fluid Flow Model
PublicationSkała łupkowa jest materiałem silnie niejednorodnym, nieciągłym i porowatym. W warunkach nieizotermicznych ruch płynu w układzie porów i kapilar jest silnie sprzężony z przenoszeniem ciepła. Przebieg szczeliny hydraulicznej silnie zależy od stopnia nasycenia skały. Opracowano innowacyjny model termo-hydro-mechaniczny oparty na modelu DEM w celu szczegółowego śledzenia frakcji ciecz/gaz w porach i pęknięciach pod kątem ich różnej...
-
BADANIA KOMPOZYTOWEGO MOSTU DLA PIESZYCH
PublicationOpracowany w ramach konsorcjum FOBRIDGE kompozytowy most pieszo-rowerowy jest pierwszym na świecie zwartym jednoelementowym obiektem o konstrukcji powierzchniowym, który wytworzony jest w całości w jednym cyklu produkcyjnym, uformowanym z powłoki sandwiczowej w technologii infuzji. Technologia infuzji polega na podciśnieniowym przesycaniu żywicą ułożonej na formie tzw. suchej konstrukcji (całego dźwigara w przypadku obiektu FOBRIDGE)....
-
Badania eksperymentalne stanu wytężenia i zachowania podkrytycznego słupów CFST
PublicationW pracy przedstawiono wyniki badań eksperymentalnych słupów osiowo ściskanych. Rozważa się efektywność poprzecznego sprężenia betonowego rdzenia słupa przez stalową rurę lub uzwojenie dla następujących typów słupów: CFST, uzwojonych i zwykłych żelbetowych. Porównuje się zachowanie pokrytyczne tych trzech rodzajów słupów. Opisane w referacie parametry badań eksperymentalnych to: stopień zbrojenia, wytrzymałość betonu, sposób obciążania....
-
Badania eksperymentalne jednoprzęsłowych płyt betonowych zbrojonych siatkami kompozytowymi z włókna bazaltowego
PublicationW pracy przedstawiono wyniki badań eksperymentalnych jednoprzęsłowych płyt z betonu, w których zastosowano nietypowe zbrojenie w postaci siatek kompozytowych z włókna bazaltowego. Uzyskane wyniki doprowadziły do wniosku, że siatki bazaltowe miały niewielki wpływ na nośność elementów, jednak znacząco zwiększały ich odkształcalnośćt. W związku z tym wskazuje to na potencjalną możliwość zastosowania tego typu zbrojenia do płyt fasadowych...
-
Projekt przebudowy nawierzchni betonowej z zastosowaniem technologii rozkruszania
PublicationW artykule przedstawiono projektowanie i technologię przebudowy starej nawierzchni z betonu cementowego drogi krajowej nr 22 na odcinku Chojnice - Tczew poprzez rozkruszanie na miejscu starych płyt betonowych (ang. rubblizing) i wbudowaniu nakładki asfaltowej. Technologię "rubblizingu" zaprojektowano po raz pierwszy w Polsce. Omówiono wady i zalety technologii rubblizingu, przedstawiono wydajność, jak i orientacyjne ceny jednostkowe....
-
Adaptacja francuskich kryteriów zmęczeniowych do projektowania nawierzchni podatnych w warunkach polskich
PublicationNiniejszy artykuł przedstawia francuską metodę projektowania konstrukcji nawierzchni podatnych oraz próbę przystosowania jej do polskich specyfikacji dotyczących mieszanek mineralno-asfaltowych. Opisano sposób dobierania parametrów materiałowych oraz obliczania współczynników modyfikujących trwałość zmęczeniową warstw asfaltowych konstrukcji nawierzchni. Dodatkowo opisano sposób obliczania trwałości nawierzchni ze względu na kryterium...
-
Weldability of S500MC Steel in Underwater Conditions
PublicationWet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters,...
-
Thickness monitoring of thin lamellae by optical measurement method
PublicationDo dnia dziesiejszego do pomiaru grubosci tarcicy używa się głównie suwmiarek. Celem projektu było opracowanie skanera, nie wymagajacego wysokich nakładów finansowych, do pomiarów grubości lameli po operacji rozpiłowywania drewna. Opracowany system jest zdolny do wykrywania elementów odbiegajacych od okreslonych tolerancji wymiarowych. zastosowano metodę pomiaru typu sandwich wykorzystująca 4 głowice laserowe. Wyazano, że przy...