Publications
Filters
total: 262
Catalog Publications
Year 2016
-
Deformations of the steel schell of a vertical cylindrical tank caused by underpressure
PublicationUnderpressure in a tank with a fixed roof may arise in the final stage of its construction as well as during its usage. This article presents stages of deformations of the tank shell and their development from the occurrence of the first deformation to either removal of the causes of underpressure or cracking of the steel shell.
-
A PRELIMINARY STUDY ON THE OPTIMAL CHOICE OF AN IMPLANT AND ITS ORIENTATION IN VENTRAL HERNIA REPAIR
PublicationThis paper addresses the problem of ventral hernia repair. The main goals are to find an optimal surgical mesh for hernia repair and to define its optimal orientation in the abdominal wall to minimise the maximum force at the tissue-implant juncture. The optimal mesh is chosen from a set of orthotropic meshes with different stiffness ratios for typical hernia placement in the abdominal area. The implant is subjected to an anisotropic...
Year 2015
-
The Magnetic Fluid Seals Research Results vs. Kelvin-Helmholtz (K-H) instability and Preliminary Conclusions
PublicationIn the article a magnetic-fluid seals durability research and the tests results are presented. The tests were made with three magnetic fluids using various magnets quantity in magnetic assemblies. If values obtained in the repeated test deviated by more than 10 % from results of the first test an additional control test was made for final characteristics. The characteristics are: critical pressure, critical motion velocity and...
-
SURVEY SIMULATOR – PLATFORMA VR DLA EDUKACJI W PRZEMYŚLE MORSKIM
PublicationArtykuł przedstawia założenia, architekturę i główne funkcje programu DNVGL Survey Simulator. Program, bazujący na wizualizacji 3D okrętów i platform wiertniczych, został stworzony w celu wspomagania profesjonalnego szkolenia załóg pływających. Realizuje on model kształcenia w znacznej mierze odmienny od akademickiego, skoncentrowany przede wszystkim na problemach praktycznych i procedurach obowiązujących w przemyśle. Przedstawione...
-
Subsoil degradation effect in reliability analysis of the jack-up platform structure
PublicationStructural reliability analysis is considered, by FORM and SORM applied to a certain idealized soil-platform structure interaction problem due to cyclic water wave and wind loads. Wave and wind loads are random variables, whereas dead load is deterministic. Load parameters are typical for storm conditions in the Baltic Sea. The soil-structure interaction is idealized as a set of linear translational and rotational springs. Due...
-
Sposoby zabezpieczeń rurociągów podziemnych przed wyparciem
PublicationCharakterystyka sposobów zabezpieczeń z zastosowaniem prefabrykowanych obciążników betonowych, płaszczy geokompozytowych z materacy Incomat i stalowych wkręcanych kotew gruntowych. Technologia wykonania oraz metodyka i przykłady obliczeń.
-
Quantitative risk assessment of new ship designs in damage conditions
PublicationThe paper is devoted to safety of ships in damage conditions. The novel contribution of the paper is connected with a new Multi-Task ship (MT-ship) design at the preliminary stage of design. There are a few problems at the preliminary stage that should be considered. One problem is connected with if the quantitative risk-based method is a reliable and formal method for safety assessment of such the new design (MT-ship) in damage...
-
Przeszłość-teraźniejszość-przyszłość Inżynierii Morskiej i Geotechniki
PublicationHistoria założenia czasopisma i jego zakres tematyczny, skład kolegium redakcyjnego, numery specjalne czasopisma (konferencyjne i jubileuszowe) i perspektywy rozwoju czasopisma.
-
NUMERICAL MODEL QUALITY ASSESSMENT OF OFFSHORE WIND TURBINE SUPPORTING STRUCTURE BASED ON EXPERIMENTAL DATA
PublicationAs a structure degrades some changes in its dynamical behavior can be observed, and inversely, observation and evaluation of these dynamical changes of the structure can provide information of structural state of the object. Testing of the real structure, besides of being costly, can cover only limited working states. It is particularly considerable in case of hardly accessible, and randomly/severely dynamically loaded offshore...
-
Modelowanie ruchu obiektów poruszających się na granicy wody i powietrza. Modelowanie bezpieczeństwa tych obiektów
PublicationW artykule przedstawiono główne problemy związane z opracowaniem koncepcji nowej generacji szybkichbezzałogowych obiektów wodnych poruszających się na granicy wody i powietrza w różnych warunkachoperacyjnych, w tym stanów załadowania. Przedstawiono problemy związane z modelowaniem ruchu tychobiektów oraz oceną ich zachowania się w różnych fazach ruchu. W artykule opisano koncepcję wybranegoobiektu, w tym jego kształt i podział...
-
Modeling of performance and safety of a multi-task unmanned autonomous maritime vehicle = Modelowanie ruchu i bezpieczeństwa wielozadaniowego bezzałogowego autonomicznego pojazdu wodnego
PublicationAt the beginning of the paper the aim of research is presented. Then the method is introduced. Next, the unmanned autonomous maritime vehicle is briefly described. The following chapter concerns a model of vehicle performance including the ballasting and motion. Some information on an integrated steering, positioning and stabilization system of the vehicle is briefly presented in the paper. Such the system enables to obtain a fully...
-
Modeling of event trees for the rapid scenario development
PublicationThe paper concerns the safety of ships in abnormal/damage conditions. Some conclusions following from the research associated with development of a method for safety assessment of ships in abnormal/damage conditions is presented in the paper. The method called SSAMADC (Ship Safety Assessment Method in Abnormal/Damage Conditions) is a risk-based method and is connected with application of the quantitative risk assessment QRA approach....
-
Metodyka nadawania cech stealth małym bezzałogowym pojazdom wodnym
PublicationW artykule przedstawiono główne problemy związane z opracowaniem koncepcji nowej generacji szybkich bezzałogowych obiektów wodnych poruszających się na granicy wody i powietrza w różnych warunkach operacyjnych, w tym stanów załadowania. Przedstawiono problemy związane z modelowaniem ruchu tych obiektów oraz oceną ich zachowania się w różnych fazach ruchu. W artykule opisano koncepcję wybranego obiektu, w tym jego kształt i podział...
-
Koncepcja zastosowania małego okrętu dwu-zadaniowego do wspomagania akcji ratowniczej na obszarze Bałtyku Południowego
PublicationW artykule przedstawiono koncepcję małego wielozadaniowego okrętu do wspomagania akcji ratowniczych na akwenie Bałtyku Południowego. Koncepcję okrętu opracowano na Politechnice Gdańskiej pod kierunkiem dr hab. inż. Mirosław K. Gerigka. Członkami interdyscyplinarnego zespołu badawczego są pracownicy Politechniki Gdańskiej i innych ośrodków naukowo-badawczych w Polsce, przy współpracy z partnerami przemysłowymi.
-
Effect of geometric imperfections on aluminium silo capacities
PublicationAn aluminum silo with initial imperfections is analysed. Two types of imperfections are considered. The first one takes the form of local indentations in the shell; their size and range are adopted on the basis of the standard guidelines. The second type is a global imperfection described through the use of its eigenforms and by means of two-dimensional random fields. The calculations are limited to two cases of loading: negative...
-
Bezpieczeństwo statków towarowych w stanach uszkodzonego poszycia w odniesieniu do warunków eksploatacyjnych. Wady probabilistycznego modelu opisu bezpieczeństwa
PublicationArtykuł ten jest poświęcony bezpieczeństwu statków w stanie uszkodzonym. Została w nim przedstawionaanaliza wybranego modelu stanu awaryjnego, polegająca na uszkodzeniu poszycia i wtargnięciu wody dokadłuba statku. W artykule znalazła się krytyka istniejącej metody zawartej w przepisach konwencji SOLAS2009 oceny bezpieczeństwa statków, oraz wnioski z możliwego do zastosowania alternatywnego modelu, któryodpowiada wynikom...
-
Application of Survey Simulator for Museums
Publication“Virtual Museum” is currently a very popular form of presenting museums’ collections of artefacts as well as an approach to archaeological research [1], [2], [3]. The term “virtual” can be understood in many ways – from a simple collection of on-line photographs, through multidirectional viewable panorama pictures, to complete interactive models of the real world, including 3-dimensional (3D) geometry, physical properties and many...
-
Analiza wrażliwości w zagadnieniach statycznych projektowania wież telekomunikacyjnych
PublicationW artykule podjęto temat zastosowania analizy wrażliwości do wsparcia projektowania i wzmacniania kratownicowych wież telekomunikacyjnych. Przedstawiono analizę wrażliwości rzeczywistej konstrukcji wieży wraz z jej interpretacją.
-
An Intergrated Model of Motion, Steering, Positioning and Stabilization of an Unmanned Autonomous Maritime Vehicle
PublicationIn the paper the aim of an interdisciplinary research is presented. The research method is introduced. An object the unmanned autonomous maritime vehicle is briefly described. The key research problem concerns a combined model of the vehicle motion including the loads of lift and hydrodynamic nature. The model takes into account the gravity and displacement forces, resistance and thrust forces, lift and other hydrodynamic forces....
-
An Analysis of the Relationship between the Architecture and the Structure of a Vessel on the Example of the Reconstruction Design Process of the Historical Sailing Yacht "General Zaruski" Carried Out between 2009 and 2012
PublicationThe article analyzes the relation between architecture and structure of a vessel on the example of the reconstruction design of a wooden sailing yacht "General Zaruski" built in Ekanӓs, Sweden in 1939. Based on the documentation of "Kaparen" (sister yacht), "Mloda Gwardia" (ex "General Zaruski") and the reconstruction classification project made by the authors, the impact of functional, spatial and aesthetic design objectives (e.g....
Year 2014
-
Zasłużeni hydrotechnicy. Prof. zw. dr hab. inż. Eugeniusz Dembicki
PublicationCharakterystyka dorobku naukowo-badawczego, dydaktycznego, inżynierskiego i organizacyjnego profesora Eugeniusza Dembickiego
-
Wpływ profilu misji na możliwości operacyjne pojazdu podwodnego
PublicationArtykuł powstał na bazie doświadczeń wynikających z wieloletniej współpracy z Marynarką Wojenną RP w zakresie systemów walki przeciwminowej opartych na pojazdach podwodnych oraz projektów naukowo-badawczych dotyczących tego rodzaju pojazdów. Celem podjęcia tematu było stworzenie bazy wiedzy do określania wytycznych dla projektowania i dobierania odpowiednich pojazdów podwodnych do przewidywanych profili misji bojowych uwzględniając...
-
Usefulness of the voltamperometric method for assessment of the purity of soil
PublicationThis paper presents a voltammetric analysis of soil. It shows that the voltammetry is a useful method for the assessment of soil contaminated with heavy metal ions. There are two major problems with voltammetry analysis: the diffusion coefficient and the measurement system. The paper contains a short literature study of mathematical equations and a study of differences between soil and water measurements. Suggestions of the solution...
-
Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results
PublicationThis paper presents selected results and aspects of themultidisciplinary and interdisciplinary research oriented for the experimental and numerical study of the structural dynamics of a bend-twist coupled full scale section of awind turbine blade structure.Themain goal of the conducted research is to validate finite elementmodel of themodified wind turbine blade section mounted in the flexible support structure accordingly to the...
-
Uncertainty Quantification in Experimental Structural Dynamics Identification of Composite Material Structures
PublicationComposite materials are widely used in manufacture of aerospace and wind energy structural components. These load carrying structures are subjected to dynamic time-varying loading conditions. Robust structural dynamics identification procedure impose tight constraints on the quality of modal models estimates obtained from vibration experiments. Modal testing results are influenced by numerous factors introducing uncertainty to...
-
SIMULATION OF PROCEED® SURGICAL MESH APPLIED TO VENTRAL HERNIA REPAIR
PublicationIn the present research, Proceed® implant is considered. The system is subjected to short-time dynamic pressure load, similar to post-operative cough naturally occurring in human abdomen. The model refers to a clinical case of 5cm of hernia operated by Proceed implant fixed by 15 joints every 3cm around the orifice. The simulations of the implanted mesh are performed by means of the Finite Element Method. The implant is modelled...
-
Rozdział mocy w układzie napędowym robota podwodnego - porównanie algorytmów alokacji naporów
PublicationPraca dotyczy syntezy systemu automatycznego sterowania robotem podwodnym w zakresie problemu rozdziału mocy w wielopędnikowym układzie napędowym. Do alokacji naporów zastosowano metody optymalizacji z ograniczeniami, pozwalające na wyznaczanie wektora naporów na podstawie wektora sił uogólnionych. Rozważono i porównano dwie metody rozdziału mocy dla robota realizującego ruch poziomy płaski o trzech stopniach swobody, rozpatrując...
-
Parametric method for evaluating optimal ship deadweight
PublicationThe paper presents a method of choosing the optimal value of the cargo ships deadweight. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper ship for a given transportation task. The deadweight is determined on the basis of a selected economic measure of the transport effectiveness of ship – the Required Freight Rate (RFR). The...
-
Numerical and experimental investigation of rotational stiffness of zed-purlins connection with sandwich panels
PublicationA rotational resistant stiffness of the zed-purlins connection with sandwich panels is investigated. A simple finite element method model of the connection is proposed. The numerical analysis of the model performed by ABAQUS software, in physically linear and geometrically nonlinear ranges, leads to the rotational resistant stiffness sought. The numerical solution obtained is verified experimentally. Two variants of distribution...
-
Modelling of some stealth features for a small navy ship at the concept design stage - part II
PublicationIn the paper a few problems associated with modelling the basic stealth features for a small ship at the concept design stage are introduced. One problem concerns the modification of the immersed ship hull using the rapid change of the ship loading condition. The second is associated with the modification of the ship boundary layer by the hull skin cover. The other stealth features of the ship are not presented in this paper. The...
-
Modelling of some stealth features for a small navy ship at the concept design stage.
PublicationIn this paper the basic research problems associated with modelling the basic stealth features for a small navy ship at the concept design stage are introduced. Amongst the major stealth features considered are: the modification of the immersed ship hull form by a rapid change of the ship loading condition, and modification of the ship boundary layer by the hull skin cover. The other stealth features of the ship are not presented...
-
Modeling of subarachnoid space width change caused by blood circulation in brain vessels
PublicationThe subarachnoid space is an anatomic space, lying in the central nervous system, between the arachnoid membrane and the pia mater. It is filled with cerebrospinal fluid, which protects and nourishes the brain. The pathological disorder of the subarachnoid space (i.e. increase or decrease of its width) a ects the nervous system. Therefore, it is important to diagnose the width changes of the subarachnoid space. One way to support...
-
Model dynamicznego balastowania małego morskiego obiektu typu stealth
PublicationW artykule przedstawiono podstawowe problemy związane z modelowaniem głównych cech decydujących o trudno-wykrywalności małego obiektu na etapie projektu koncepcyjnego. Metoda badawcza oparta jest na ocenie zachowania się obiektu i ocenie ryzyka wypadku. W artykule skupiono się głównie na przedstawieniu modelu matematycznego opisującego model dynamicznego balastowania małego morskiego obiektu typu stealth. Przedstawione w artykule...
-
Metodyka pracy tachimetrem na potrzeby pomiaru i inwentaryzacji cyfrowej muzealiów
PublicationOpracowanie metodyki pracy tachimetrem na potrzeby pomiaru i inwentaryzacji cyfrowej muzealiów stanowi kontynuację prac, prowadzonych w latach 2011–2012, w zakresie przygotowania Narodowego Muzeum Morskiego w Gdańsku (NMM) do efektywnej digitalizacji zbiorów. W trakcie realizacji projektu, poświęconego skanowaniu za pomocą ramienia pomiarowego Faro ScanArm, pojawiło się szereg problemów i wniosków dotyczących alternatywnych metod...
-
Mechanical compatibility of implants used in hernia repair with abdominal wall
PublicationThe paper deals with a membrane model of a synthetic surgical mesh for treatment of abdominal hernia. The authors analyse the compatibility of two implant types with the human wall: Dualmesh Gore and Proceed. The finite element method is applied to simulate tjhe behavior of the proposed model. Due fact that recurrences are usually caused by connection failure, this study is focused on reaction forces in supports representing the...
-
Innowacyjne technologie CAx / PLM
PublicationWyzwania stawiane przed firmami projektowymi, produkcyjnymi, usługowymi to m.in. rosnące wymagania innowacyjności produktów. Zauważalna jest silna potrzeba wprowadzania nowych produktów wysokiej jakości, w krótkim czasie i konkurencyjnych cenach. Zauważalny jest również aspekt konieczności minimalizowania ryzyka związanego z wprowadzaniem nowych rozwiązań na rynek. W odpowiedzi na te wyzwania wprowadzono nowe technologie wspomagające...
-
Effective method for determining environmental loads on supporting structures for offshore wind turbines
PublicationThis paper presents a description of an effective method for determining loads due to waves, current and wind acting on the supporting structures of the offshore wind turbines. This method is dedicated to the structures consisting of the cylindrical or conical elements as well as (truncates) pyramids of polygon with a large number of sides (8 or more). The presented computational method is based on the Morison equation, which was...
-
Cough influence on fascia-mesh system built for a hernia repair - an experimental research
PublicationAn experimental approach to identify stronger and weaker fixation schemes in laparoscopic ventral hernia repair is presented in the paper. Two types of implants, whose mechanical properties are significantly different and five kinds of connectors are considered. Physical models of operated hernia have been built using those materials and porcine abdominal tissue. The models have been subjected to dynamic impulse load, similar to...
-
CFD and FEM model of an underwater vehicle propeller
PublicationDuring the project execution of design and optimization the Remotely Operated Vehicle (ROV) research on its propulsion has been carried out. The entire project was supported by CFD and FEM calculations, which taking into account the characteristics of underwater vehicle. One of the tasks was to optimize the semi-open duct for horizontal propellers, which provided propulsion and controllability in horizontal plane. In order to...
-
Badanie właściwości olejów napędowych metodą elektrochemicznej spektroskopii impedancyjnej
PublicationW pracy podjęto próbę zbadania olejów napędowych metodą elektrochemicznej spektroskopii impedancyjnej. Materiałem do badań było pięć próbek zimowych olejów napędowych typu premium, zakupionych na stacjach różnych dostawców. Na podstawie wyników pomiaru impedancji stworzono elektryczny obwód zastępczy dla celki z olejem napędowym, a następnie wyznaczono wartości elementów modelu dla przebadanych próbek. Dokonano oceny jakości przyjętych...
-
APPLICATION OF QUANTITATIVE RISK ASSESSMENT TO SHIPS IN EMERGENCY CONDITIONS
PublicationThe paper is devoted to safety of ships in emergency conditions. The currently valid prescriptive method of safety assessment of ships in damage conditions is included in the SOLAS 2009 Part B-2 Ch.II-1 regulations. It is devoted to the design stage and difficult to apply in operation. A possible alternative described in this paper is a method based on assessment of performance of ships and risk assessment. Type of risk evaluation...
-
An attempt to create a digital reconstruction of the Copper Ship = Próba cyfrowej rekonstrukcji kadłuba wraku Miedziowca
PublicationThis study presents an attempt to create a digital reconstruction of the W-5 shipwreck (the Copper Ship) based on data acquired by 3D scanning of structural components held at the National Maritime Museum in Gdańsk and on a physical reconstruction model of the ship’s hull. A digital reconstruction would facilitate analysis of various possible options for the structural design of the hull, and would enable the preparation of a model for...
Year 2013
-
Wpływ napięcia takielunku na odkształcenia kadłuba jachtu regatowego na przykładzie jednostki klasy Omega
PublicationPrzedstawiono problem deformacji kadłuba pod wpływem sił generowanych przez takielunekj, w kontekście przepisów klasowych oraz pożądanych i niepożądanych własności konstrukcyjnych kadłuba.
-
Usage of parametric echosounder with emphasis on buried object searching.
PublicationThe purpose of this article is to present the results of investigation to search for buried objects. The paper will contain echograms and other means of visualization from buried pipe placed between area of W?adys?awowo and gas platform and interesting in terms of the number of small and medium-sized unidentified objects found in the muddy bottom at different depths localized in the Gulf of Puck - results will be presented also...
-
UNDERWATER NOISE GENERATED BY A SMALL SHIP IN THE SHALLOW SEA
PublicationStudy of the sea noise has been a subject of interest for years. The first work of this scope were published at the turn of the twentieth century by Knudsen (KNUDSEN et al., 1948) and G. Wenz (WENZ, 1962). Disturbances called "shipping noise" are one of the important components of the sea noise. In this work the results of an experimental research of underwater noise produced by a small ship of a classic propulsion are...
-
The shallow sea experiment with usage of linear hydrophone array
PublicationPurpose of this article is to present designed and made linear hydrophone array and the results obtained during in situ trails on Gulf of Gdańsk. The measuring system allowed to localize hydrophones in the selected points and perform measurements in both the horizontal antenna positioning and vertical. Made in this way recordings allow creating accurate 3D imaging of sound intensity/propagation. During research three floating objects...
-
Propagation of Acoustic Disturbances in Shallow Sea
PublicationPropagation of acoustic waves in shallow sea differs fundamentally from the same phenomenon occurring in deep sea in view of non-negligible distance from the sea bottom in the first case, where presence of two regions limiting the water layer results in the acoustic pressure distribution induced by a harmonic source has an interferential nature as a result of multi-path propagation of the acoustic signal. These interferential properties...
-
Podstawy teorii projektowania okrętów
PublicationW zamyśle autora podręcznik winien służyć studentom studiów inżynierskich pierwszego stopnia na kierunku Oceanotechnika, który aktualnie prowadzony jest w Politechnice Gdańskiej, w Zachodniopomorskim Uniwersytecie Technologicznym oraz w Akademii Marynarki Wojennej w Gdyni. Wybrane treści podręcznika mogą być przydatne również studiującym na wydziałach kształcących morskie kadry oficerskie, gdyż zawiera wiedzę wymaganą Rozporządzeniem...
-
Physical and mathematical modelling of implant-fascia system in order to improve laparoscopic repair of ventral hernia
PublicationThis paper describes an investigation of biomechanical behaviour of hernia repair, which is focused on the selection of safe linking of certain type of implant with fascia in laparoscopic operation. The strength of various fixations of the implant to the fascia is analysed. Methods: The research is based on experimental observations of operated hernia model behaviour during a dynamic impulse load corresponding to post-operative...
-
Numerical Analysis of Impact of Energy Buoy Anchoring Configurations on its Motion and Efficiency
PublicationThis paper presents a numerical analysis of the impact of energy buoy mooring configurations on its movement on the wave and effectiveness. The method used to analyse the buoy movement modelling in six degrees of freedom was described in a paper presented at the Conference 2011. Simulations of the buoy movement in regular wave and power calculations were conducted for several configurations of anchoring systems and position of...