Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties

Abstrakt

The present study examined the application of polyols obtained via microwave-assisted liquefaction of lignin in the production of rigid polyurethane foam. Lignin was liquefed in crude glycerol and 1,4-butanediol at diferent temperatures (130–170 °C), without a catalyst and using various biomass concentrations (15 and 30 wt%). The physicochemical properties, process yield, and FTIR-based identifcation of the obtained polyols were investigated. Under optimal conditions, i.e., a 5-min microwave heating time and a reaction temperature of 150 °C, a polyol characterized by a suitable hydroxyl number of 670 mg KOH/g was obtained with a 93% process yield. Liquefed biopolyol was directly used for the production of rigid polyurethane foams with the addition of polymeric diphenylmethane diisocyanate at the [NCO/OH] ratio of 2:1. Mechanical properties of the obtained foams gradually improved with increasing content of biopolyol. The 5% weight loss temperature (T5) for bio-based foams was higher, respectively 6 and 13 °C compared to the petrochemical foam. Replacement of petrochemical polyether with biopolyols showed the ability to obtain rigid polyurethane foams from lignin and crude glycerol.

Cytowania

  • 4 7

    CrossRef

  • 0

    Web of Science

  • 4 5

    Scopus

Autorzy (5)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 55 razy
Wersja publikacji
Accepted albo Published Version
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00226-018-0991-4
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuł w czasopiśmie wyróżnionym w JCR
Opublikowano w:
WOOD SCIENCE AND TECHNOLOGY nr 52, strony 599 - 617,
ISSN: 0043-7719
Język:
angielski
Rok wydania:
2018
Opis bibliograficzny:
Gosz K., Kosmela P., Hejna A., Gajowiec G., Piszczyk Ł.: Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties// WOOD SCIENCE AND TECHNOLOGY. -Vol. 52, iss. 3 (2018), s.599-617
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00226-018-0991-4
Weryfikacja:
Politechnika Gdańska

wyświetlono 265 razy

Publikacje, które mogą cię zainteresować

The influence of crude glycerol and castor oil-based polyol on the structure and performance of rigid polyurethane-polyisocyanurate foams

2017

Structure, Mechanical, Thermal and Fire Behavior Assessments of Environmentally Friendly Crude Glycerol-Based Rigid Polyisocyanurate Foams

2018

Biopolyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal characterization

2016

Enhancement of PUR/PIR foam thermal stability after addition of Zostera marina biomass component investigated via thermal analysis and isoconversional kinetics

2021
Meta Tagi