Estimating the uncertainty of discharge coefficient predicted for oblique side weir using Monte Carlo method

Ahmed Y. Mohammed; Anna Golijanek-Jędrzejczyk

doi:10.1016/j.flowmeasinst.2020.101727

Estimating the uncertainty of discharge coefficient predicted for oblique side weir using Monte Carlo method

Abstrakt

Side weir is a hydraulic structure, which is used in irrigation systems to divert some water from main to side channel. It is installed at the entrance of the side channel to control and measure passing water into the side channel. Many studies provided side weir water surface profile and coefficient of discharge to measure water discharge diverted into the side channel. These studies dealt with different side weir shapes (rectangular, trapezoidal, triangular and circular), which were installed perpendicular to the flow direction. Recently, some studies dealt with skew side weir, but these studies still need to more investigation. Here we report to investigate oblique side weir theoretically using statistical method to supported other studies in this case. Measurement uncertainty discharge coefficient Cd was obtained by two methods: analytical according to the 'Guide to the expression of uncertainty in measurement' and the Monte Carlo method. The results indicate that all experimental results are consistent with the analytical results. The relative expanded uncertainty of the discharge coefficient Cd does not exceed 2%.

Cytowania

9

CrossRef
0

Web of Science
1 3

Scopus

Autorzy (2)

Ahmed Y. Mohammed
Anna Golijanek-Jędrzejczyk dr inż.

Cytuj jako

Pełna treść

pobierz publikację

pobrano 114 razy

Wersja publikacji: Accepted albo Published Version
Licencja: otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:: Publikacja w czasopiśmie
Typ:: artykuły w czasopismach
Opublikowano w:: FLOW MEASUREMENT AND INSTRUMENTATION nr 73,
ISSN: 0955-5986
Język:: angielski
Rok wydania:: 2020
Opis bibliograficzny:: Mohammed A., Golijanek-Jędrzejczyk A.: Estimating the uncertainty of discharge coefficient predicted for oblique side weir using Monte Carlo method// FLOW MEASUREMENT AND INSTRUMENTATION -Vol. 73, (2020), s.101727-
DOI:: Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.flowmeasinst.2020.101727
Weryfikacja:: Politechnika Gdańska