Wyszukiwarka
Instrumented end notched flexure - Crack propagation and process zonemonitoring Part II: Data reduction and experimental
Abstrakt
A mode II instrumented end notched flexure three point bending (ENF) adhesion test is described. The adhesive joint consists of two aluminium alloy (AW7075-T6) plates bonded with a structural epoxy adhesive (Hysol EA 9395™). Strain gauges are attached to the outer surface (backface) of the substrates in the lengthwise direction to measure local surface strain during crack propagation. Simultaneously, load/displacement measurements are performed. Two cases were investigated. The first was static: the joint wasloaded below the crack propagation threshold. In the second, applied load above the threshold led to crack propagation. The former test confirmed the predicted load transfer mechanism between bondedand unbonded parts of the joint. In the second case, the crack front process zone was revealed in situ in mode II, we believe for the first time. These new results permitted validation of simple or refined analytical/ numerical models including those of the cohesive zone. In addition, the backface strain gauge monitoring technique exhibited unexpected mode I contributions, quantitatively evaluated. Finally, R-curves are presented, as estimated with various standard models and compared with that postulated, where the process zone is accounted for.
Autorzy (4)
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
- Copyright (2012 Elsevier Ltd.)
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuł w czasopiśmie wyróżnionym w JCR
- Opublikowano w:
-
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
nr 50,
strony 310 - 319,
ISSN: 0020-7683 - Język:
- angielski
- Rok wydania:
- 2013
- Opis bibliograficzny:
- Budzik M., Jumel J., Ben Salem N., Shanahan M.: Instrumented end notched flexure - Crack propagation and process zonemonitoring Part II: Data reduction and experimental// INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. -Vol. 50, nr. iss. 2 (2013), s.310-319
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 176 razy
Publikacje, które mogą cię zainteresować
Two tests for adhesive bonding long term characterization: principles and applications
- J. Jumel,
- M. Budzik,
- S. Chauffaille
- + 1 autorów
An in situ technique for the assessment of adhesive properties of a joint under load
- M. Budzik,
- J. Jumel,
- M. Shanahan
Process zone in the Single Cantilever Beam under transverse loading. - Part II: Experimental
- M. Budzik,
- J. Jumel,
- M. Shanahan