Abstrakt
The popularity of the elasto-plastic Hardening Soil (HS) model is based on simple parameter identification from standard testing and empirical formulas. The HS model is implemented in many commercial FE codes designed to analyse geotechnical problems. In its basic version, the stress–strain behaviour within the elastic range is subject to the hypoelastic power law, which assures the barotropy of the elastic stiffness. However, a proper modelling within the small strain range, i.e. strain-induced stiffness degradation and correct reproduction of the hysteretic behaviour, was one of the most important drawbacks in the HS formulation. The first small strain stiffness extension to the HS model was proposed by Benz (Small strain stiffness of soils and its numerical consequences, 2007), and the new model was called Hardening Soil Small (HSS). Despite the simple isotropic formulation, its applicability was proved in various numerical simulations in geotechnics. However, the HSS formulation exhibits a serious fault known in the literature as overshooting, i.e. uncontrolled reset of the loading memory after tiny unloading–reloading cycles. The authors’ main aim was to retain the set of material parameters for the HSS formulation and to propose a new small strain extension to the HS model without overshooting. The new proposal is based on the BRICK model which represents the concept of nested yield surfaces in strain space. The implementation aspects of the new HS-Brick model are described, and its performance is presented in some element tests and selected boundary value problems by comparisons with the HSS formulation.
Cytowania
-
3 9
CrossRef
-
0
Web of Science
-
3 8
Scopus
Autorzy (2)
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
- otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
Acta Geotechnica
nr 15,
strony 2031 - 2051,
ISSN: 1861-1125 - Język:
- angielski
- Rok wydania:
- 2020
- Opis bibliograficzny:
- Cudny M., Truty A.: Refinement of the Hardening Soil model within the small strain range// Acta Geotechnica -Vol. 15, (2020), s.2031-2051
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s11440-020-00945-5
- Bibliografia: test
-
- Addenbrooke TI, Potts DM, Puzrin AM (1997) The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction. Géotechnique 47(3):693-712 otwiera się w nowej karcie
- Amorosi A, Rollo F, Houlsby GT (2020) A nonlinear anisotropic hyperelastic formulation for granular materials: comparison with existing models and validation. Acta Geotech 15(1):179-196 otwiera się w nowej karcie
- Atkinson JH (2000) Non-linear soil stiffness in routine design, 40th Rankine Lecture. Géotechnique 50(5):487-508 otwiera się w nowej karcie
- Bagbag A, Lehane B, Doherty J (2017) Predictions of footing and pressuremeter response in sand using a hardening soil model. Proc Inst Civ Eng Geotech Eng 170(6):479-492 otwiera się w nowej karcie
- Benz T (2007) Small-strain stiffness of soils and its numerical consequences. Ph.D. thesis, University of Stuttgart
- Benz T, Vermeer P, Schwab R (2009) A small-strain overlay model. Int J Numer Anal Methods Geomech 33:25-44 otwiera się w nowej karcie
- Brinkgreve RBJ, Kumarswamy S, Swolfs WM, Zampich L, Ragi Manoj N (2019) Plaxis finite element code for soil and rock analyses. Plaxis BV, Bentley Systems, Incorporated, Philadelphia
- Burland JB (1989) ''Small is beautiful''-the stiffness of soils at small strains, 9th Laurits Bjerrum Memorial Lecture. Can Geo- tech J 26(4):499-516 otwiera się w nowej karcie
- Clarke SD, Hird CC (2012) Modelling of viscous effects in natural clays. Can Geotech J 49:129-140 otwiera się w nowej karcie
- Clayton CRI (2011) Stiffness at small strain: research and prac- tice, 50th Rankine Lecture. Géotechnique 61(1):5-37 otwiera się w nowej karcie
- Cudny M, Partyka E (2017) Influence of anisotropic stiffness in numerical analyses of tunneling and excavation problems in stiff soils. In: Lee W, Lee J-S, Kim H-K, Kim D-S (eds) Proceedings of the 19th international conference on soil mechanics and geotechnical engineering, vol 2. ISSMGE, Seoul, pp 719-722
- de Borst R, Groen AE (1995) Some observations on element performance in isochoric and dilatant plastic flow. Int J Numer Methods Eng 38:2887-2906 otwiera się w nowej karcie
- Eekelen HAM (1980) Isotropic yield surfaces in three dimensions for use in soil mechanics. Int J Numer Anal Methods Geomech 4:89-101
- Ellison KC, Soga K, Simpson B (2012) A strain space soil model with evolving stiffness anisotropy. Géotechnique 62(7):627-641 otwiera się w nowej karcie
- Gu X, Yang S (2018) Why the OCR may reduce the small strain shear stiffness of granular materials? Acta Geotech 13(6):1467-1472 otwiera się w nowej karcie
- Hardin BO, Drnevich VP (1972) Shear modulus and damping in soils: design equations and curves. J Soil Mech Found Div ASCE 98(SM7):667-692
- Hilber HM, Hughes TJR, Taylor RL (1977) Improved numerical dissipation for time integration algorithms in structural dynamics. Earthq Eng Struct Dyn 5:283-292 otwiera się w nowej karcie
- Hueckel T, Nova R (1979) On paraelastic hysteresis of soils and rocks. Bull Pol Acad Sci 27(1):49-55 otwiera się w nowej karcie
- Katsigiannis G (2017) Modern geotechnical codes of practice and new design challenges using numerical methods for supported excavations. Ph.D. thesis, University College London otwiera się w nowej karcie
- Kim S, Finno RJ (2019) Inverse analysis of a supported exca- vation in Chicago. J Geotech Geoenviron Eng ASCE. https://doi. org/10.1061/(ASCE)GT.1943-5606.0002120 otwiera się w nowej karcie
- Knittel L, Wichtmann T, Niemunis A, Huber G, Espino E, Tri- antafyllidis T (2020) Pure elastic stiffness of sand represented by response envelopes derived from cyclic triaxial tests with local strain measurements. Acta Geotech. https://doi.org/10.1007/ s11440-019-00893-9 otwiera się w nowej karcie
- Ladesma A, Alonso E (2017) Protecting sensitive constructions from tunnelling: the case of world heritage buildings in barce- lona. Géotechnique 67(10):914-925 otwiera się w nowej karcie
- Länsivaara T, Nordal S (1998) A soil model for the overcon- solidated region of clays. In: Cividini A (ed) Application of numerical methods to geotechnical problems, proceedings of the fourth european conference on numerical methods in geotechni- cal engineering, NUMGE98. Springer, Udine, pp 347-356 otwiera się w nowej karcie
- Larsson R, Runesson K (1996) Implicit integration and consistent linearization for yield criteria of the Mohr-Coulomb type. Mech Cohesive-Frict Mater 1(4):367-383 otwiera się w nowej karcie
- Lehane BM, Simpson B (2000) Modelling glacial till under tri- axial conditions using a BRICK soil model. Can Geotech J 37(5):1078-1088 otwiera się w nowej karcie
- Lings ML, Pennington DS, Nash DFT (2000) Anisotropic stiff- ness parameters and their measurement in a stiff natural clay. Géotechnique 50(2):109-125 otwiera się w nowej karcie
- Mašín D, Rott J (2014) Small strain stiffness anisotropy of natural sedimentary clays: review and a model. Acta Geotech 9(2):299-312 otwiera się w nowej karcie
- Masing G (1926) Eigenspannungen und Verfestigung beim Messing. In: Proceedings of 2nd international congress of applied mechanics, Zurich, pp 332-335 otwiera się w nowej karcie
- Mróz Z (1967) On the description of anisotropic workhardening. J Mech Phys Solids 15:163-175 otwiera się w nowej karcie
- Niemunis A, Cudny M (1998) On hyperelasticity for clays. Comput Geotech 23:221-236 otwiera się w nowej karcie
- Niemunis A, Cudny M (2018) Discussion on ''Dynamic soil- structure interaction: a three-dimensional numerical approach and its application to the Lotung case study''. Poor performance of the HSS model. Comput Geotech 98:243-245 otwiera się w nowej karcie
- Niemunis A, Prada-Sarmiento LF, Grandas-Tavera CE (2011) Extended paraelasticity and its application to a boundary value problem. Acta Geotech 6:81-92 otwiera się w nowej karcie
- Paternesi A, Schweiger H, Scarpelli G (2017) Numerical analyses of stability and deformation behavior of reinforced and unrein- forced tunnel faces. Comput Geotech 88:256-266 otwiera się w nowej karcie
- Ramberg W, Osgood WR (1943) Description of stress-strain curve by three parameters. Technical Note 902, National Advi- sory Committee for Aeronautics, Washington, DC otwiera się w nowej karcie
- Rowe P (1962) The stress-dilatancy relation for static equilibrium of an assembly of particles in contact. Proc R Soc Lond 269:500-527 otwiera się w nowej karcie
- Schanz T, Vermeer PA, Bonnier PG (1999) The Hardening Soil model: formulation and verification. In: Beyond 2000 in com- putational geotechnics-10 years of plaxis. Rotterdam, Balkema, pp 1-16 otwiera się w nowej karcie
- Simo JC, Rifai S (1990) A class of mixed assumed strain methods and the method of incompatible modes. Int J Numer Methods Eng 29:1595-1638 otwiera się w nowej karcie
- Simpson B (1992) Retaining structures: displacement and design, 32nd Rankine Lecture. Géotechnique 42(4):541-576 otwiera się w nowej karcie
- Simpson B, O'Riordan NJ, Croft DD (1979) A computer model for the analysis of ground movements in London clay. Géotechnique 29(2):149-175 otwiera się w nowej karcie
- Simpson B, Atkinson JH, Jovičić V (1996) The influence of anisotropy on calculations of ground settlements above tunnels. In: Mair RJ, Taylor RN (eds) Geotechnical aspects of under- ground construction in soft ground. Balkema, Rotterdam, pp 591-594 otwiera się w nowej karcie
- Vermeer PA, Schwab R, Benz T (2006) Two elastoplastic models for small and large strains and their use in engineering practise. In: Wu W, Yu HS (eds) Modern trends in geomechanics. Springer proceedings in physics, vol 106. Springer, Berlin, Heidelberg, pp 159-174 otwiera się w nowej karcie
- Viggiani GMB, Atkinson JH (1995) Stiffness of fine grained soils at very small strains. Géotechnique 45(2):249-265 otwiera się w nowej karcie
- Yeow H-C, Coop MR (2017) The constitutive modelling of London clay. Proc Inst Civ Eng Geotech Eng 170(1):3-15 otwiera się w nowej karcie
- ZACE Services Ltd, Software Engineering, Lausanne, Switzer- land, ZSOIL â . User manual ZSoil.PC v2020. Soil, Rock and Structural Mechanics in dry or partially saturated media (1985-2020)
- Acta Geotechnica otwiera się w nowej karcie
- Zytynski M, Randolph MF, Nova R, Wroth CP (1978) On modelling the unloading-reloading behaviour of soils, Short communications. Int J Numer Anal Methods Geomech 2:87-94 otwiera się w nowej karcie
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 365 razy