dr hab. inż. Justyna Łuczak
Zatrudnienie
- Profesor uczelni w Katedra Inżynierii Procesowej i Technologii Chemicznej
Publikacje
Filtry
wszystkich: 99
Katalog Publikacji
Rok 2024
-
Polysaccharide nanocomposites in wastewater treatment: A review
PublikacjaIn modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles...
Rok 2023
-
Conversion of waste biomass to designed and tailored activated chars with valuable properties for adsorption and electrochemical applications
PublikacjaWaste biomass, a renewable energy source, is inexpensive material that has great potential in sorp-tion and electrochemical application. The selected waste materials (corncobs, coconut shells, wal-nuts, and pistachio husks) allow to close the production cycle and enable material recycling, which are important aspects in the hierarchy of waste management. The proposed methodology for pro-duction and activation of biochars can be...
-
Effect of temperature and composition on physical properties of deep eutectic solvents based on 2-(methylamino)ethanol – measurement and prediction
PublikacjaNovel deep eutectic solvents were synthesized using 2-(methylamino)ethanol as hydrogen bond donor with tetrabutylammonium bromide or tetrabutylammonium chloride or tetraethylammonium chloride as hydrogen bond acceptors. Mixtures were prepared at different molar ratios of 1:6, 1:8 and 1:10 salt to alkanolamine and then Fourier Transform Infrared Spectroscopy measurements were performed to confirm hydrogen bonds interactions between...
-
Exploring synergistic effects in physical-chemical activation of Acorus calamus for water treatment solutions
PublikacjaThe research proposed a novel method of obtaining sorption material from readily available Acorus calamus bio- mass through a combination of physical and chemical activation processes. The material with the highest specific surface area (1652 m2 g−1) was obtained by physical activation with CO2, followed by chemical activation with KOH. Reversing the order of activation methods resulted in a lower specific surface area (1014 m2...
-
Morphology control through the synthesis of metal-organic frameworks
PublikacjaDesignable morphology and predictable properties are the most challenging goals in material engineering. Features such as shape, size, porosity, agglomeration ratio significantly affect the final properties of metal- organic frameworks (MOFs) and can be regulated throughout synthesis parameters but require a deep under- standing of the mechanisms of MOFs formation. Herein, we systematically summarize the effects of the indi- vidual...
-
Multi-functional monodispersed SiO2-TiO2 core-shell nanostructure and TEOS in the consolidation of archaeological lime mortars surfaces
PublikacjaArchaeological traditional lime mortars are susceptible to many environmental conditions such as the impact of water (rain, humidity, groundwater, etc.), variation of temperatures' degrees, wind and/or pollution. Accordingly, this research aims to provide newly assessed multifunctional Nano-coating for the purpose of archaeological lime mortar protection. For this, the study combined physicochemical and mechanical characterizations...
-
Nickel-based catalysts for electrolytic decomposition of ammonia towards hydrogen production
PublikacjaNickel is an attractive metal for electrochemical applications because it is abundant, cheap, chemically resilient, and catalytically active towards many reactions. Nickel-based materials (metallic nickel, its alloys, oxides, hydroxides, and composites) have been also considered as promising electrocatalysts for ammonia oxidation. The electrolysis of ammonia aqueous solution results in evolution of gaseous hydrogen and nitrogen....
Rok 2022
-
A natural deep eutectic solvent - protonated L-proline-xylitol - based stationary phase for gas chromatography
PublikacjaThe paper presents a new kind of stationary phase for gas chromatography based on deep eutectic solvents (DES) in the form of a mixture of L-proline (protonated with hydrochloric acid) as a hydrogen bond acceptor (HBA) and xylitol as a hydrogen bond donor (HBD) in a molar ratio of HBA:HBD 5:1. DES immobilized on a silanized chromatographic support was tested by gas chromatography (GC) in order to determine its resolving power for...
-
ACTIVATED BIOCHAR AS AN ADSORBENT OF ORGANIC POLLUTANTS FOR WATER AND WASTEWATER TREATMENT
PublikacjaThe use of biomass, especially waste biomass, as an alternative energy source is a very important issue today. Pyrolysis is a process of thermal degradation of raw material and one of its products is biochar. This product is mainly distinguished by its high carbon content, and by improving its quality through activation, it can be more widely used. Activated biocarbon has a strongly developed surface and porous structure, and as...
-
Capping ligand initiated CuInS2 quantum dots decoration on, ZnIn2S4 microspheres surface under different alkalinity levels resulting in different hydrogen evolution performance
PublikacjaSurface distribution of quantum dots (QDs) at the semiconductor matrix caused by synthesis condition (e.g. pH of solution during coupling) could lead to different photocatalytic activity. Thus, achieving an optimal covering of semiconductor matrix by QDs has been challenging. Herein, the influence of the alkalinity level of aqueous decoration medium for the coupling of mercaptoundecanoic acid (MUA) capped CuInS2 quantum dots (CIS)...
-
Effect of the ionic liquids on extraction of aromatic and sulfur compounds from the model petrochemical stream
PublikacjaSuitability of a imidazolium ionic liquids (ILs) as solvents in dearomatization and desulfurization in the ternary systems and in a model multicomponent systems has been analyzed. With this aim, ternary liquid-liquid phase equilibrium data (LLE) have been obtained for ternary mixtures of {IL + benzene, or toluene, or thiophene, or 2-butanethiol + hexane}, or {IL + benzene + 2-methylpentane} at T = 298.15 K and ambient pressure,...
-
Ionic liquid as morphology-directing agent of two-dimensional Bi2WO6: New insight into photocatalytic and antibacterial activity
PublikacjaAn efficient and durable utilization of light to drive photocatalytic reactions still requires the overcoming of barriers. Herein, two-dimensional (2D) ultrathin IL_Bi2WO6 (IL_BWO) photocatalysts were prepared for the first time via ionic liquid-assisted hydrothermal route by adjusting the amount of tetrabutylammonium chloride [TBA][Cl], synthesis temperature and duration. IL played the role of morphology-directing agent given...
-
New Simple and Robust Method for Determination of Polarity of Deep Eutectic Solvents (DESs) by Means of Contact Angle Measurement
PublikacjaThe paper presents a new method for evaluating the polarity and hydrophobicity of deep eutectic solvents (DESs) based on the measurement of the DES contact angle on glass. DESs consisting of benzoic acid derivatives and quaternary ammonium chlorides–tetrabutylammonium chloride (TBAC) and benzyldimethylhexadecylammonium chloride (16-BAC)—in selected molar ratios were chosen for the study. To investigate the DESs polarity, an optical...
-
Novel binary mixtures of alkanolamine based deep eutectic solvents with water - thermodynamic calculation and correlation of crucial physicochemical properties
PublikacjaThis paper demonstrates the assessment of physicochemical and thermodynamic properties of aqueous solutions of novel deep eutectic solvent (DES) built of tetrabutylammonium chloride and 3-amino-1-propanol or tetrabutylammonium bromide and 3-amino-1-propanol or 2-(methylamino)ethanol or 2-(butylamino)ethanol. Densities, speeds of sound, refractive indices, and viscosities for both pure and aqueous mixtures of DES were investigated...
-
Novel Binary Mixtures of Alkanolamine Based Deep Eutectic Solvents with Water—Thermodynamic Calculation and Correlation of Crucial Physicochemical Properties
PublikacjaThis paper demonstrates the assessment of physicochemical and thermodynamic properties of aqueous solutions of novel deep eutectic solvent (DES) built of tetrabutylammonium chloride and 3-amino-1-propanol or tetrabutylammonium bromide and 3-amino-1-propanol or 2-(methylamino)ethanol or 2-(butylamino)ethanol. Densities, speeds of sound, refractive indices, and viscosities for both pure and aqueous mixtures of DES were investigated...
-
The influence of ILs on TiO2 microspheres activity towards 5-FU removal under artificial sunlight irradiation
PublikacjaIn this work, the effect of various ionic liquids (ILs), namely, choline chloride [Chol][Cl], hexadecylpyridynium chloride [HDPy][Cl], and tributylmethylammonium chloride [TBMA][Cl], on the morphology, surface compo-sition in relation to photocatalytic oxidation of 5-fluorouracil (5-FU) and phenol in the presence of TiO2 pho-tocatalysts under artificial sunlight conditions was investigated. The highest photoactivity towards cytostatic...
Rok 2021
-
Betaine and L-carnitine ester bromides: Synthesis and comparative study of their thermal behaviour and surface activity
PublikacjaSix esters of both betaine and L-carnitine bromides, featuring alkyl groups ranging from C8 to C18 in length, have been synthesized. The thermal behaviour of these twelve bio-based salts has been analyzed and compared by thermal gravimetric analysis and differential scanning calorimetry. The L-carnitine alkyl ester bromides melted below 100 C and can hence be considered ionic liquids (ILs) with full rights. Conversely, the betaine...
-
First deep eutectic solvent-based (DES) stationary phase for gas chromatography and future perspectives for DES application in separation techniques
PublikacjaThe paper presents the first application of deep eutectic solvents (DES) as stationary phases for gas chromatography. DES obtained by mixing tetrabutylammonium chloride (TBAC) as a hydrogen bond acceptor (HBA) with heptadecanoic acid being a hydrogen bond donor (HBD) in a mole ratio of HBA:HBD equal to 1:2 was characterized by its ability to separate volatile organic compounds (VOCs). The Rohrschneider – McReynolds constants determined...
-
How Do Ionic Liquids Affect the Surface Structure of Titania Photocatalyst? An Electron-Trap Distribution-Analysis Study
PublikacjaTitanium(IV) oxide, titania, photocatalyst particles were prepared from titanium alkoxide in the presence of several kinds of ionic liquids, and it was clarified that a group of samples exhibited photocatalytic activity for phenol degradation under the irradiation of light of wavelength >400 nm higher than those of the other group of samples. Although the conventional structural analytical results could not be related to the activity,...
-
Novel two-step synthesis method of thin film heterojunction of BiOBr/Bi2WO6 with improved visible-light-driven photocatalytic activity
PublikacjaA novel two-step ionic liquid assisted procedure was applied for a controllable synthesis of BiOBr/Bi2WO6 heterojunction thin films. The preparation route involved an anodic oxidation of tungsten foil and hydrothermal transformation of as-anodized oxide in the presence of bismuth precursor and ionic liquid, N-butylpyridinium bromide [BPy][Br]. The BiOBr plates with irregular shapes adhered to the surface of flower-like Bi2WO6 and...
-
Pyrolysis of Pruning Residues from Various Types of Orchards and Pretreatment for Energetic Use of Biochar
PublikacjaThe routine pruning and cutting of fruit trees provides a considerable amount of biowaste each year. This lignocellulosic biomass, mainly in the form of branches, trunks, rootstocks, and leaves, is a potential high-quality fuel, yet often is treated as waste. The results of a feasibility study on biochar production by pyrolysis of residues from orchard pruning were presented. Three types of biomass waste were selected as raw materials...
-
Remarkable visible-light induced hydrogen generation with ZnIn2S4 microspheres/CuInS2 quantum dots photocatalytic system
PublikacjaA new and active material in the form of ZnIn2S4 microspheres decorated by CuInS2 quantum dots have been obtained by hydrothermal method for the first time. The optimum amount of CuInS2 quantum dots (1.13 wt.%) introduced into rection medium during ZnIn2S4 microspheres synthesis increased the photocatalytic H2 generation rate by 2.5 times than that of bare ZnIn2S4 photocatalysis under visible light irradiation. This sample exhibited...
-
Stannates, titanates and tantalates modified with carbon and graphene quantum dots for enhancement of visible-light photocatalytic activity
PublikacjaMost efforts in heterogeneous photocatalysis are focused on development of new and stable photoactive materials efficient in degradation of various pollutants under visible-light irradiation. In this regard, the wide-bandgap perovskite semiconductors, i.e., SrTiO3 (titanate), SrSnO3 (stannate) and AgTaO3 (tantalate), were prepared by a solvothermal method, and then modified with carbon quantum dots (CQDs) or graphene quantum dots...
-
Visible-light-driven lanthanide-organic-frameworks modified TiO2 photocatalysts utilizing up-conversion effect
PublikacjaHighly efficient and quite stable composite with core-shell-like architecture reported herein, responds to the challenge of sunlight-driven photocatalysts. The Ln(ndc)/TiO2 photocatalytic system comprises active lanthanide-carboxylate coordination networks (Nd, Er, Ho, and Tm as metal ions, and 2,6-naphthalene dicar-boxylic acid as the organic linker) and inert titanium dioxide and allow to convert incompatible visible radiation...
Rok 2020
-
Activated Carbon Produced by Pyrolysis of Waste Wood and Straw for PotentialWastewater Adsorption
PublikacjaPyrolysis of straw pellets and wood strips was performed in a fixed bed reactor. The chars, solid products of thermal degradation, were used as potential materials for activated carbon production. Chemical and physical activation processes were used to compare properties of the products. The chemical activation agent KOH was chosen and the physical activation was conducted with steam and carbon dioxide as oxidising gases. The eect...
-
Application of surface active amino acid ionic liquids as phase-transfer catalyst
PublikacjaFive structurally related morpholinium derived ionic liquids containing N-acetyl-glycinate anion were synthesized and their thermal stability, surface properties and activity as phase transfer catalysts investigated. The thermal properties were studied by differential scanning calorimetry, while the adsorption at the air/water interface and micellization behavior was analyzed by surface tension measurements, conductometry and isothermal...
-
Chestnut-Derived Activated Carbon as a Prospective Material for Energy Storage
PublikacjaIn this work, we present the preparation and characterization of biomass-derived activatedcarbon (AC) in view of its application as electrode material for electrochemical capacitors. Porouscarbons are prepared by pyrolysis of chestnut seeds and subsequent activation of the obtainedbiochar. We investigate here two activation methods, namely, physical by CO2and chemical usingKOH. Morphology, structure and specific surface area (SSA)...
-
Enhanced Visible Light Active WO3 Thin Films Toward Air Purification: Effect of the Synthesis Conditions
PublikacjaTaking into consideration, our current environmental situation in the world people should face with growing problem of air and water pollution. Heterogeneous photocatalysis is highly promising tool to improve both, air and water quality through decomposition/mineralization of contaminations directly into harmless CO2 and H2O under ambient conditions. In this contribution we focused on the synthesis of self-assembly WO3 thin films...
-
Experimental and predicted physicochemical properties of monopropanolamine-based deep eutectic solvents
PublikacjaIn this work, the novel deep eutectic solvents (DESs) based on 3-amino-1-propanol (AP) as hydrogen bond donor (HBD) and tetrabutylammonium bromide (TBAB) or tetrabutylammonium chloride (TBAC) or tetraethylammonium chloride (TEAC) as hydrogen bond acceptors (HBAs) were synthesized with different molar ratios of 1: 4, 1: 6 and 1: 8 salt to AP. Fourier Transform Infrared Spectroscopy measurements were performed to provide an evidence...
-
Experimental and predicted physicochemical properties of monopropanolamine-based deep eutectic solvents
PublikacjaIn this work, the novel deep eutectic solvents (DESs) based on 3-amino-1-propanol (AP) as hydrogen bond donor (HBD) and tetrabutylammonium bromide (TBAB) or tetrabutylammonium chloride (TBAC) or tetraethylammonium chloride (TEAC) as hydrogen bond acceptors (HBAs) were synthesized with different molar ratios of 1:4, 1:6 and 1:8 salt to AP. Fourier Transform Infrared Spectroscopy measurements were performed to provide an evidence...
-
Fabrication of ILs-Assisted AgTaO3 Nanoparticles for the Water Splitting Reaction: The Effect of ILs on Morphology and Photoactivity
PublikacjaThe design of an active, stable and ecient photocatalyst that is able to be used for hydrogen production is of great interest nowadays. Therefore, four methods of AgTaO3 perovskite synthesis, such as hydrothermal, solvothermal, sol-gel and solid state reactions, were proposed in this study to identify the one with the highest hydrogen generation eciency by the water splitting reaction. The comprehensive results clearly show that...
-
How thermal stability of ionic liquids leads to more efficient TiO2-based nanophotocatalysts: Theoretical and experimental studies
PublikacjaIonic liquids (ILs) containing distinct nitrogen-bearing organic cations (pyridinium, pyrrolidinium, imidazolium, ammonium, morpholinium) were first used for the preparation of 23 IL-TiO2 types of composites by ionic liquid assisted solvothermal synthesis. These 23 optimal ILs structures (i.e. compounds exhibiting an optimal combination of specific properties, functionality, and safety) for synthesis and experimental validation...
-
Post-Pyrolytic Carbon as a Phase Change Materials (PCMs) Carrier for Application in Building Materials
PublikacjaThis article covers new application for char as a carrier of phase-change materials (PCM) that could be used as an additive to building materials. Being composed of bio-char and PCM, the granulate successfully competes with more expensive commercial materials of this type, such as Micronal® PCM. As a PCM carrier, char that was obtained from the pyrolysis of chestnut fruit (Aesculus hippocastanum) with different absorbances of the...
-
Structural, magnetic and spectral properties of tetrahedral cobalt(II) silanethiolates: a variety of structures and manifestation of field-induced slow magnetic relaxation
PublikacjaBlue crystals of five heteroleptic cobalt(II) silanethiolates 1–5 have been obtained by the reaction of [Co{SSi (tBuO)3}2(NH3)]2 with aminopyridines and aminomethylpyridines at an appropriate molar ratio and their structural, spectral, thermal and magnetic properties have been established and described. All complexes 1–5 contain Co(II) ions in a tetrahedral CoN2S2 environment formed by (tBuO)3SiS− residues and pyridines and present...
-
Synergy between AgInS2 quantum dots and ZnO nanopyramids for photocatalytic hydrogen evolution and phenol degradation
PublikacjaDespite the unique properties of single semiconductor nanomaterials and quantum dots, poor photocatalytic activity has characterized them and the fabrication of nanocomposites has become necessary to enhance their photocatalytic performance. Thus, AgInS2 quantum dots (AIS QDs, 4.0±1.6 nm), have been successfully prepared and loaded onto ZnO nanopyramids (ZnO NPy). The effect of the nominal amount of AIS QDs decorating ZnO NPy on...
-
Theoretical and Experimental Studies on the Visible Light Activity of TiO2 Modified with Halide-Based Ionic Liquids
PublikacjaFormation of a surface complex between organic molecules and TiO2 is one of the possible strategies for the development of visible light-induced TiO2 photoactivity. Herein, three ionic liquids (ILs) with the same cation and dierent anions (1-butylpirydynium chloride/bromide/iodide) have been applied for the surface modification of TiO2 and to understand the role of anions in visible light-induced activity of ILs-TiO2 systems. Photocatalytic...
-
Waste Rubber Pyrolysis: Product Yields and Limonene Concentration
PublikacjaTires, conveyor belts, floor mats, and shoe soles form a main-stream of rubber waste. The amount of these used materials continuously increases due to development of the rubber market. Therefore, pro-ecological utilization (i.e., energy recycling instead of burning) and recovering valuable and recyclable materials becomes an urgent necessity. In this regard, this work was devoted to the chemical recycling of selected used rubber...
Rok 2019
-
Impact of Tetrazolium Ionic Liquid Thermal Decomposition in Solvothermal Reaction on the Remarkable Photocatalytic Properties of TiO2 Particles
PublikacjaIonic liquids (ILs) could serve as a structuring agent, a solvent, or a source of dopant during solvothermal synthesis of semiconductors particles. To understand the role of IL during formation of TiO2 particles, it is necessary to study the stability of this IL in solvothermal synthesis conditions, as well as studying the surface properties of formed TiO2 particles. In view of this, the effect of the 2,3,5-triphenyltetrazolium...
-
Ordered TiO2 nanotubes with improved photoactivity through self-organizing anodization with the addition of an ionic liquid: effects of the preparation conditions
PublikacjaModifying the geometric and surface parameters of oriented TiO2 nanotubes (NTs) is beneficial to the utilization of solar energy for chemical reactions, and this performance may be further improved. Thus, the effects of adding an ionic liquid (IL), 1-butylpiridinium chloride [BPy][Cl], and the effects of the water content and preparation conditions on the surface morphological, physicochemical, photocatalytic and photoelectrochemical...
-
Surface active fatty acid ILs: Influence of the hydrophobic tail and/or theimidazolium hydroxyl functionalization on aggregates formation
PublikacjaNine structurally-related fatty acid ionic liquids have been prepared and their thermal behavior as well as their ability to self-assemble in water has been investigated. The thermal properties were studied by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC), while the aggregation behavior was analyzed by tensiometry, isothermal titration calorimetry (ITC), conductometry, dynamic light scattering (DLS),...
-
The effect of imidazolium ionic liquid on the morphology of Pt nanoparticles deposited on the surface of SrTiO3 and photoactivity of Pt–SrTiO3 composite in the H2 generation reaction
PublikacjaPhotocatalytic water splitting has great potential in solar-hydrogen production as a low-cost and environmentally friendly method. Different unique techniques used to obtain photocatalysts with various modifications to improve H2 generation have been introduced. In the present work, SrTiO3 was successfully synthesized via the solvothermal method in the presence of ionic liquid (IL) - 1-butyl-3-methylimidazolium bromide ([BMIM][Br])...
-
Utilization of shale cuttings in production of lightweight aggregates
PublikacjaThe development of technologies for unconventional hydrocarbon exploration requires designing procedures to manage drilling waste that are consistent with the waste management hierarchy. In view of this, the possibility to apply shale drill cuttings as a prospective additive (replacing bentonite) to fly ash used for the production of lightweight aggregates (LWAs) was investigated. Moreover, a facile, waste-free method of LWAs production...
Rok 2018
-
Dependence between Ionic Liquid Structure and Mechanism of Visible-Light-Induced Activity of TiO2 Obtained by Ionic-Liquid-Assisted Solvothermal Synthesis
PublikacjaBecause of the tremendous structural diversityof ionic liquids (ILs), simple transfer of observations performed for one IL used for IL-TiO2 preparation on different samples is not possible. Therefore, four ionic liquids, all containing distinct nitrogen-bearing organic cations (pyridinium, pyrrolidinium, ammonium, imidazolium), were used for the first time for the preparation of IL-TiO2 composites. The role of the individual IL...
-
Electrode materials for electrochemical capacitors based on poly(3,4-ethylenedioxythiophene) and functionalized multi-walled carbon nanotubes characterized in aqueous and aprotic electrolytes
PublikacjaWithin this work, we report a facile one-stage synthesis of nanocomposites based on functionalized carbon nanotubes (CNTs) and electroactive polymer poly(3,4-ethylenedioxythiophene). Three different composites are investigated as potential electrode materials for the electrochemical capacitors. Two of the composites contain carbon nanotubes (ox-CNTs), functionalized by acid oxidation process (65% HNO3, 120 °C). The third composite...
-
Fabrication and photoactivity of ionic liquid–TiO2 structures for efficient visible-light-induced photocatalytic decomposition of organic pollutants in aqueous phase
PublikacjaTo investigate the effect of the ionic liquid (IL) chain length on the surface properties and photoactivity of TiO2, a series of TiO2 microspheres have been synthesized via a solvothermal method assisted by 1-methyl-3-octadecylimidazolium chloride ([ODMIM][Cl]) and 1-methyl-3-tetradecylimidazolium chloride ([TDMIM][Cl]). All as-prepared samples were characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy...
-
Facile formation of self-organized TiO2 nanotubes in electrolyte containing ionic liquid - ethylammonium nitrate and their remarkable photocatalytic properties
PublikacjaThe oriented TiO2 nanotube arrays (NTs) are identified as a stable, active and recyclable photocatalytic surface. However, their photoactivity is strictly depended on morphology (especially length), which could be controlled by anodic oxidation parameters, including electrolyte properties. To control the morphology, were successfully synthesized a series of NTs by a novel approach where ionic liquid (IL), ethylammonium nitrate...
-
Highly Active TiO2 Microspheres Formation in the Presence of Ethylammonium Nitrate Ionic Liquid
PublikacjaSpherical microparticles of TiO2 were synthesized by the ionic liquid-assisted solvothermal method at different reaction times (3, 6, 12, and 24 h). The properties of the prepared photocatalysts were investigated by means of UV-VIS diffuse-reflectance spectroscopy (DRS), Brunauer–Emmett–Teller (BET) surface area measurements, scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy...
-
Micellar Route of the Synthesis of Alkyl Xylosides: An Unexpected Effect of Amphiphilic Imidazolium Ionic Liquids
PublikacjaThis manuscript presents results from the investigation on the synthesis of alkyl xylosides by the novel, very efficient and promising protocol of the Fischer synthesis from unprotected xylose and aliphatic alcohol. The use of 1-alkyl-3-methylimidazolium hydrogen sulfate ionic liquids as the catalysts with dual functionality (surfactant + acid catalyst) and micellar reaction system are the main novelty of described method. It has...
Rok 2017
-
The effect of microemulsion composition on the morphology of Pd nanoparticles deposited at the surface of TiO2 and photoactivity of Pd-TiO2
PublikacjaA series of microemulsion (ME) system, constituted by different water to surfactant molar ratios (Wo) and oil to surfactant mass ratios (S), have been applied for Pd-TiO2 preparation. The effect of ME properties on the morphology of Pd nanoparticles formed at TiO2 surface and an effect of Pd size and distribution on the surface and photocatalytic properties of Pd-TiO2 were investigated. Microemulsion systems were characterized...
-
The ILs-assisted electrochemical synthesis of TiO2 nanotubes: The effect of ionic liquids on morphology and photoactivity
PublikacjaFacile and environmentally benign one-step titanium anodization method for TiO2 nanotubes (NTs) formation in a presence of ionic liquids (ILs) was proposed. Influence of the IL structure and its content in ethylene glycol electrolyte on morphology, surface properties and photoactivity of the TiO2 NTs was investigated. Possible interactions between IL and TiO2 NTs as well as the mechanism of NTs formation during anodic oxidation...
-
Visible light photocatalytic activity of ionic liquid-TiO2 spheres: effect of the ionic liquid's anion structure
PublikacjaThe effect of the ionic liquid’s (IL) anion type ([BIMIM][X], where X= [Br], [PF6] or [OctSO4]) and content on the morphology, surface properties and photoactivity of TiO2 obtained by solvothermal method has been systematically investigated. Our results revealed that the presence of [Br], [OctSO4] anions favors formation of anatase phase, while presence of [PF6] anion causes formation of mixture of anatase and Ti(OH)PO4 phases....
-
Wpływ pH na ługowanie zwiercin łupkowych roztworami wodnymi
PublikacjaZwierciny wytworzone podczas poszukiwania węglowodorów w formacjach łupkowych mogą zawierać metale ciężkie i radionuklidy. Mając na uwadze zagospodarowanie zwiercin, wykonano badanie ich ługowania metodą statyczną, stosując roztwory wodne o różnych pH regulowanych HNO3 i KOH. Charakterystykę chemiczną zwiercin z otworu z Basenu Bałtyckiego przeprowadzono metodą rentgenowskiej analizy fluorescencyjnej, natomiast...
Rok 2016
-
Dual functionality of amphiphilic 1-alkyl-3-methylimidazolium hydrogen sulfate ionic liquids: surfactants with catalytic function
PublikacjaA series of amphiphilic 1-alkyl-3-methylimidazolium hydrogen sulfate ionic liquids were synthesized. Acidic hydrogen sulfate ionic liquids with the alkyl chains C6–C14 are characterized by good surface properties. Their surface properties (adsorption and micellization parameters, degree of ionization of micelles, Krafft temperatures and thermodynamic parameters) were determined. Synthesized ionic liquids were applied as a co-catalyst...
-
Ionic liquids for nano- and microstructures preparation. Part 1: Properties and multifunctional role
PublikacjaIonic liquids (ILs) are a broad group of organic salts of varying structure and properties, used in energy conversion and storage, chemical analysis, separation processes, as well as in the preparation of particles in nano- and microscale. In material engineering, ionic liquids are applied to synthesize mainly metal nanoparticles and 3D semiconductor microparticles. They could generally serve as a structuring agent or as a reaction...
-
Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis
PublikacjaIonic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can also play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in...
-
Micellar aggregation of Triton X-100 surfactant in imidazolium ionic liquids
PublikacjaIn this work we investigated aggregation behavior of a nonionic surfactant Triton X-100 in eighteen imidazolium ionic liquids (ILs) with two to eight carbon atoms in cations alkyl chain, namely 1-ethyl-3-methylimidazolium, [EMIM], 1-butyl-3-methylimidazolium, [PrMIM], 3-methyl-1-propylimidazolium, [BMIM], 1-hexyl-3-methylimidazolium, [PMIM], 3-methyl-1-pentyl-imidazolium, [HMIM], and 1-octyl-3-methylimidazolium, [OMIM], and with...
-
Release of selected chemical elements from shale drill cuttings to aqueous solutions of different pH
PublikacjaThe effect of pH changes on leachability of light and heavy metals from shale drill cuttings generated from unconventional shale gas production was investigated. Cuttings, being the primary byproduct generated from drilling operations, belong to the potentially hazardous type of wastes due to presence of heavy and radioactive elements and remains of drilling fluid. In this regard, assessment of potentially dangerous components...
-
The ILs-assisted solvothermal synthesis of TiO2 spheres: the effect of ionic liquids on morphology and photoactivity of TiO2
PublikacjaEffect of the ionic liquid (IL) structure (chain length in the imidazolium cation) on morphology and photoactivity of TiO2 particles has been systematically investigated. The TiO2 microspheres have been successfully synthesized via facile solvothermal method assisted by ionic liquids, such as 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-decyl-3-methylimidazolium chloride [DMIM][Cl] using tetra-tert-butyl orthotitanate...
-
Transport properties of microemulsions with ionic liquid apolar domains as a function of ionic liquid content
PublikacjaThe specific conductivity, dynamic viscosity and apparent diffusion coefficient of each of four aqueous ionic liquid microemulsions (IL-MEs) were measured as a function of ionic liquid (IL) content. The investigated systems were composed of water, hydrophobic ILs (1-butyl-3-methylimidazolium hexafluorophosphate or bis(trifluoromethanesulphonyl)imide) and the nonionic surfactant Triton X-100 or its mixture with cosurfactant (butanol)....
Rok 2015
-
Micelle formation of Tween 20 nonionic surfactant in imidazolium ionic liquids
PublikacjaAggregation behavior of polyoxyethylene (POE)-type nonionic surfactant Tween 20 in imidazolium ionic liquids with varying chain length and different anions, such as tetrafluoroborate, hexafluorophosphate, bis(trifluoromethanesulfonyl)imide, and trifluoromethanesulfonate, was investigated by means of surface tension, conductivity and dynamic light scattering measurements. The role of the chain length, anion size as well as interactions...
-
Transport properties of aqueous ionic liquid microemulsions: influence of the anion type and presence of the cosurfactant
PublikacjaTransport properties, viz. specific conductivity, dynamic viscosity and apparent diffusion coefficients, were measured as a function of water content in aqueous ionic liquid microemulsions containing 1-butyl-3- methylimidazolium hexafluorophosphate, [BMIM][PF6] and bis(trifluoromethanesulphonyl)imide, [BMIM][Tf2N], stabilized by the nonionic surfactant TX-100, or its mixture with a cosurfactant, i.e. butanol. The investigation covered...
Rok 2014
-
Bacterial consortium an axenic cultures isolated from activated sewage sludge for biodegradation of imidazolium-based ionic liquid
PublikacjaExtensive research and increasing number of potential industrial applications made ionic liquids (ILs) important materials in design of new, cleaner technologies. Together with the technological applicability, the environmental fate of these chemicals is considered and significant efforts are being made in designing strategies to mitigate their potential negative impacts. Many ILs are proven to be poorly biodegradable and relatively...
-
MOBILITY OF SHALE DRILL CUTTINGS CONSTITUENTS
PublikacjaThis study focuses on the abundance and mobility of metals and trace elements from shale drill cuttings into the water, being the main component of hydraulic fracturing fluid. The relationship between composition of the shale rock and the potential element release during standard water-based leaching tests was characterized by means of X-Ray Fluorescence spectroscopy (XRF). The XRF analysis confirmed the assumption of shales constituents...
-
Studies on formation and percolation in ionic liquids/TX-100/water microemulsions
PublikacjaTernary microemulsion systems of H2O/Triton X-100/[BMIM][Tf2N], and H2O/Triton X-100/[BMIM][PF6] were prepared, compared and characterized for phase behavior for different water/surfactant ratios, at 25 °C. It was found that a change of an anion structure in the ionic liquids determines the total monophasic area of the systems. A liquid crystalline mesophase was detected in H2O/Triton X-100/[BMIM][PF6]. The microemulsion domains...
Rok 2013
-
Aggregation of nonionic surfactants in imidazolium ionic liquids
PublikacjaMicellar aggregation of surfactants in aqueous solutions has been described in terms of the balance between dispersive interactions of the hydrocarbon part of the amphiphilic molecule, and the hydration and electrostatic repulsive effects of hydrophilic head group. Changing the interactions by replacing water with another polar solvent, such as amides or glycols, has been studied to a smaller extent (Singh, Saleem et al. 1980;...
-
Influence of Ionic Liquid Structure on Supported Ionic Liquid Membranes Effectiveness in Carbon Dioxide/Methane Separation
PublikacjaThis paper indicates the possibility of application of imidazolium ionic liquids immobilized in polymeric supports—supported ionic liquid membranes—in CO2 separation from gaseous streams (e.g., biogas). Imidazolium salts containing alkyl fluoride anions, bis(trifluoromethylsulfonyl)imide and trifluoromethanesulfonate, selectively separating CO2 were used. The permeability of CO2 through membranes was investigated under gas pressure...
-
KO-FERMENTACJA METANOWA JAKO ALTERNATYWNA METODA ZAGOSPODAROWANIA ZANIECZYSZCZONEJ BIOMASY
PublikacjaJedną z przyczyn ograniczonego stosowania fitoremediacji jest powstawanie zanieczyszczonej biomasy, dla której wciąż nie opracowano odpowiedniej technologii zagospodarowania lub unieszkodliwiania. W pracy przedstawiono sposób redukcji objętości biomasy, powstającej w wyniku fitoremediacji, metodą fermentacji metanowej. Głównym zagadnieniem jest intensyfikacja produkcji biogazu w procesie ko-fermentacji dwóch lub większej liczby...
-
Modeling the Influence of Salts on the Critical Micelle Concentration of Ionic Surfactants
PublikacjaWe show for the first time that a phenomenological, augmented volume-based thermodynamics (aVBT) model is capable to predict the critical micelle concentrations of ionic surfactants, including ionic liquids, with added salts. The model also adjusts for the type of salt added by including its molecular volume, which might form a connection to the Hofmeister effect. The other physico-chemically relevant quantities included in the...
-
Wetting of surfaces with ionic liquids
PublikacjaW pracy skupiono się na ocenie zwilżalności wybranych powierzchni stałych cieczami jonowymi. Jako związki testowe zastosowano chlorki dialkiloimidazoliowe. Porównano kąty zwilżania wybranych cieczy jonowych stosując metodę wzniesienia kapilarnego oraz metodę siedzącej kropli. Podczas testu zaobserwowano obniżanie wartości współczynnika lepkości cieczy jonowych wynikającą z ekspozycji płynu na parę wodną zawartą w powietrzu atmosferycznym....
Rok 2012
-
Anaerobic co-digestion of white cabbage and sewage sludge
PublikacjaPrzedstawiono badania nad możliwością redukcji biomasy kapusty białej w procesie mezofilowej ko-fermentacji z przefermentowanym osadem ściekowym w procesie jednostopniowej fermentacji. Wykazano, że biomasę kapusty białej można poddać ko-fermentacji z osadem ściekowym przy obciążeniu komory fermentacyjnej na poziomie 1,87 kg smo m-3d-1. Zaobserwowano, że w wyniku fermentacji metanowej wsadu można uzyskać biogaz o średnim składzie...
-
Fermentacja metanowa kapusty białej oraz osadu nadmiernego
PublikacjaW pracy przedstawiono wyniki badań fermentacji metanowej biomasy kapusty białej i osadu nadmiernego pobranego z oczyszczalni ścieków Saur Neptun Gdańsk S.A. Proces fermentacji prowadzono w warunkach mokrych, w sposób quaziciągły, w temperaturze 37°C. Zaobserwowano, że poddając fermentacji beztlenowej wsad zawierający kapustę białą oraz osad nadmierny można uzyskać biogaz o średnim składzie 50% metanu i 50% ditlenku węgla. Podczas...
-
Rozpuszczalność węglowodorów aromatycznych w roztworach micelarnych cieczy jonowych
PublikacjaPrzedstawiono możliwość zastosowania cieczy jonowych do solubilizacji micelarnej zanieczyszczeń w postaci lotnych związków organicznych, występujących w przemysłowych układach ekstrakcyjnych oraz stanowiących zanieczyszczenia środowiska. Zaobserwowano, że po przekroczeniu krytycznego stężenia micelizacji cieczy jonowych w wodzie, następuje stopniowy wzrost stężenia węglowodorów aromatycznych w roztworze, który wynika z ich inkorporacji...
Rok 2011
-
Analiza odpadów z aglomeracji trójmiejskiej pod kątem termicznego wykorzystania frakcji energetycznej
PublikacjaPrzedstawiono wyniki badań odpadów komunalnych pod katem ich właściwości technologicznych mając na uwadze wyodrębnianie frakcji energetycznych dla projektowanego zakładu termicznej utylizacji w województwie pomorskim. Zakład ten ma przetwarzać frakcje energetyczną ze wszystkich jednostek mechaniczno-biologicznego przetwarzania odpadów komunalnych w regionie. Poszczególne oznaczenia wykonane zostały zgodnie z Polską Normą, normami...
-
Fate of Ionic Liquids in Soils and Sediments
PublikacjaZrozumienie losu cieczy jonowych w glebach i osadach dennych jest istotnym elementem ich implementacji z zachowaniem idei zrównoważonego rozwoju. Niniejsza publikacja zawiera analizę i podsumowanie danych dotyczących oddziaływań cieczy jonowych w roztworach wodnych oraz agregacji na powierzchniach stałych. Zaobserwowano, że silnie lipofilowe ciecze jonowe zawierające długi łańcuch węglowodorowy lub duży organiczny anion wykazują...
-
Influence of microbial adaptation and supplementation of nutrients on the biodegradation of ionic liquids in sewage sludge treatment processes
PublikacjaCiecze jonowe przyciągają coraz większą uwagę ze strony przemysłu, ze względu na możliwość zastosowania ich jako zamiennik dla bardziej niebezpiecznych substancji. Jednakże część ich struktury może stać się trwałym zanieczyszczeniem dlatego niezbędne jest prowadzenie badań w celu określenia zagrożenia dla środowiska, związanego z obecnością w nim cieczy jonowych, np. dotyczących możliwości ich biodegradacji w warunkach rzeczywistych....
-
Influence of the Hofmeister anions on self-organization of 1-decyl-3-methylimidazolium chloride in aqueous solutions
PublikacjaW pracy określono wpływ anionów z szeregu Hofmeistera na agregację micelarną wodnych roztworów chlorku 1-decylo-3-metyloimidazoliowego. Pod uwagę wzięto dwa czynniki - rodzaj anionu oraz siłę jonową. Wykazano, że dodatek zastosowanych soli skutkuje obniżaniem krytycznego stężenia micelizacji związku z siłą zgodną z trendem opisanym szeregiem Hofmeistera. Dodatek elektrolitu powoduje obniżenie wartości entalpii micelizacji i przejście...
-
Investigation of the distribution of imidazolium ionic liquids in the environment - aggregation in water and sorption on minerals
PublikacjaWpływ cieczy jonowych na środowisko, a w szczególności: migracja do wód powierzchniowych i gruntowych, jak również transport/retencja w gruntach jest determinowany przede wszystkim przez właściwości fizykochemiczne cieczy jonowej jak i właściwości matrycy środowiskowej. Znajomość zjawisk zachodzących w wyniku kontaktu cieczy jonowych z wodą oraz glebą jest jednym z podstawowych warunków oceny ryzyka chemicznego. W pracy wykazano,...
-
Use of imidazolium ionic liquids for carbon dioxide separation from gas mixtures
PublikacjaNowoczesnym podejściem do separacji tlenku węgla (IV) z mieszanin gazowych jest zastosowanie cieczy jonowych jako materiału absorpcyjnego. Niemierzalna prężność par i możliwość modyfikacji budowy kationu i wyboru anionu cieczy jonowych sprawiają, że związki te mogą zastąpić obecnie stosowane aminy. Przedstawiono wpływ struktury chemicznej cieczy jonowych, ciśnienia oraz temperatury na efektywność absorpcji CO2 i innych gazów w...
Rok 2010
-
Antimicrobial and surface activity of 1-alkyl-3-methylimidazolium derivatives
PublikacjaWiedza na temat zależności struktura-aktywność umożliwia projektowanie i syntezę nowych kationowych związków amfifilowych ze zoptymalizowaną aktywnością antymikrobową na rzecz przyszłego rozwoju nowych środków dezynfekujących, sanityzujących czy konserwujących. Potrzeba projektowania i identyfikowania nowych związków posiadających właściwości przeciwbakteryjne jest rezultatem pojawienia się bardziej odpornych mikroorganizmów w...
-
Badania agregacji imidazoliowych cieczy jonowych w wodzie w odniesieniu do zastosowań w technologii chemicznej
PublikacjaPrzedmiotem pracy była charakterystyka agregacji imidazoliowych cieczy jonowych w środowisku wodnym, tworzonych struktur oraz wpływu wybranych czynników na agregację. Badania objęły zróżnicowane strukturalnie związki, będące kombinacją kationu 1-alkilo-3-metyloimidazoliowego (n = 4-18) oraz różnych anionów. W badaniach wykorzystano metody badawcze fizykochemii powierzchni, pozwalające na oszacowanie oddziaływań powierzchniowych...
-
Effect of neoteric solvents on the activated sewage sludge activity
PublikacjaCiecze jonowe (ILs) cieszą sie rosnącym zainteresowaniem z uwagi na fakt, iż znajdują coraz więcej zastosowań jako alternatywa dla rozpuszczalników organicznych. W związku z zaistnieniem możliwości zastosowania ILs w nowych czystych technologiach nastała potrzeba zbadania ich toksyczności w stosunku do organizmów żywych i środowiska. Celem badań było oszacowanie wpływu cieczy jonowych na wyselekcjonowane mikroorganizmy osadu czynnego....
-
Experimental study of the variations of the freezing points of ionic liquids in water
PublikacjaTemperatura zamarzania czystych soli alkiloimidazoliowych zawiera się w przedziale od - 70ºC do - 90ºC zależnie od długości podstawinika alkilowego oraz od rodzaju anionu. Celem niniejszej pracy jest znalezienie odpowiedniej metody pomiaru zmian temperatury zamarzania chlorku 1-metylo-3-oktyloimidazolu w wodzie. Wynik przeprowadzonych badań pozwolił na sporządzenie fragmentu diagramu fazowego dla wodnego roztworu chlorku...
-
Hydrometalurgiczny odzysk srebra z odpadów srebronośnych
Publikacja -
Ionic liquids - greener solvents or environmental threat?
PublikacjaZe względu na niemierzalnie niską prężność par ciecze jonowe były uważane za 'zielone rozpuszczalniki'. Ich zastosowanie w technologiach (bio)chemicznych przynosi korzyści nie tylko ekologiczne ale również ekonomiczne. Niemniej jednak zanieczyszczenie środowiska poprzez przedostanie się cieczy jonowych do gleb i wód gruntowych wraz ze ściekami/odciekami przemysłowymi lub w wyniku przypadkowych rozlewów stanowi realne zagrożenie....
-
Rapid test for ionic liquids toxicity evaluation
PublikacjaW literaturze przedmiotu dostępne są dane na temat toksyczności cieczy jonowych, szczególności tych mających zastosowanie przemysłowe, gdzie toksyczność wyrażana jest jako EC50 mierzone względem konkretnego organizmu np. Vibrio fischeri, Daphnia magna itp. Z uwagi na taksonomiczne zróżnicowanie osadu czynnego nie jest możliwe bezpośrednie wnioskowanie na temat toksyczności cieczy jonowych w stosunku do osadu czynnego na podstawie...
-
Wyznaczanie współczynników dyfuzji dwutlenku węgla przez membrany ciekłe wysycane cieczą jonową
PublikacjaZmniejszenie emisji związków węgla, głównie CO2, powstających w procesach przemysłowych, jest w chwili obecnej jednym z najważniejszych zagadnień ochrony środowiska. Ciecze jonowe odgrywają istotną rolę w projektowaniu technologii selektywnej separacji CO2 z mieszanin gazowych ze względu na wysoką zdolność do absorpcji CO2 przy jednoczesnej niskiej współabsorpcji innych gazów
-
Wyznaczanie współczynników dyfuzji tlenku węgla (IV) przez membrany wysycone cieczą jonową = Determination of carbon dioxide diffusion coefficients in supported ionic liquids membranes
PublikacjaWykazano możliwość zastosowania imidazoliowych cieczy jonowych osadzonych na nośnikach polimerowych SILM (supported ionic liquids membranes) do absorpcji CO2. W badaniach wykorzystano sole imidazoliowe posiadające w strukturze aniony fluoroalkilowe typu [Tf2N] i [TfO], które selektywnie separują tlenek węgla (IV). Wyznaczono współczynniki dyfuzji CO2 przez poszczególne SILM na podstawie ilości dyfundującego CO2 przez powierzchnię...
-
Zagospodarowanie biomasy metodą fermentacji metanowej
Publikacja
Rok 2009
-
Predicting the critical micelle concentration of aqueous solutions of ionic liquids and other ionic surfactants
PublikacjaNiektóre ciecze jonowe, szczególnie te będące kombinacją organicznego i nieorganicznego jonu, wykazują strukturalne podobieństwo do surfaktantów. Krytyczne stężenie micelizacji jest podstawowym parametrem w chemii powierzchni i nauce o koloidach. Parametr ten został zmierzony dla wielu cieczy jonowych, jednakże ze względu na ogromną ilość możliwych kombinacji anionów i kationów jego eksperymentalny pomiar dla wszystkich struktur...
-
Thermodynamics of micellization of imidazolium ionic liquids in aqueous solutions
PublikacjaPodobieństwo pomiędzy strukturami niektórych cieczy jonowych, a surfaktamtami jonowymi wskazuje na możliwość wykazywania, przez te związki, tendencji do agregacji i adsorpcji na powierzchniach międzyfazowych. Mierząc w różnych temperaturach przewodnictwo elektryczne w funkcji stężenia oznaczono temperaturę Kraffta i zależność temperaturową krytycznego stężenia micelizacji (CMC) dla czterech, różniących się długościami łańcucha,...
Rok 2008
-
Chapter 22. Antimicrobial and surface activity of 1-alkyl-3-methyl imidazolium derivatives
PublikacjaCiecze jonowe wykazują aktywność przeciwgrzybową oraz przeciwbakteryjną zależną od struktury badanego związku. Zbadano wpływ długości łańcucha alkilowego w kationie na aktywność przeciwmikrobiologiczną oraz przedstawiono zależność pomiędzy tą aktywnością a krytycznym stężeniem micelizacji imidazolowych cieczy jonowych.
-
Chapter 32. Method to predict the critical micelle concentration of ionic liquids from the molecular volume
PublikacjaAmfifilowość wielu imidazoliowych cieczy jonowych powoduje, że zjawiska powierzchniowe mają znaczny wpływ na właściwości układów zawierających te związki. Dotychczas przeprowadzono wiele badań w celu wyznaczenia krytycznego stężenia micelizacji cieczy jonowych o różnej budowie. Ze względu na możliwość modyfikacji budowy kationu i wyboru anionu oraz ich kombinacji, podjęto próbę opracowania empirycznego równania pozwalajacego na...
-
Chapter 34. Influence of salt on micellisation of 1-decyl-3-methyl imidazolium chloride in aqueous solution
PublikacjaZbadano wpływ prostych elektrolitów na micelizację chlorku 1-decylo-3-metyloimidazoliowego w środowisku wodnym. Zaobserwowano, że dodatek soli powoduje obniżanie krytycznego stężenia micelizacji (CMC) badanego związku z siłą zgodną z trendem opisanym szeregiem Hofmeistera. Przedstawiono również zależność między stężeniem dodanej soli a CMC.
-
Imidazolium ionic liquids in mineral processing
PublikacjaImidazoliowe ciecze jonowe (ILs) stanowią nową klasę związków o szerokich możliwościach przemysłowego zastosowania. Z przeglądu dostępnej literatury wynika, że ILs mogłyby zostać wykorzystane do odzysku i oczyszczania metali ze środowiska wodnego oraz rud w procesach ługowania, ekstarkcji rozpuszczalnikowej oraz w procesach elektrochemicznych. Pochodne imidazoliowe mogą być wykorzystywane zarówno jako rozpuszczalniki jak i aktywne...
-
Micelle formation of imidazolium ionic liquids in aqueous solution
PublikacjaCiecze jonowe (ILs) stanowią nową klasę związków o szerokich możliwościach przemysłowego zastosowania. Z przeglądu dostępnej literatury wynika, że niektóre ciecze jonowe tworzą agregaty w roztworach wodnych. W celu określenia jak tworzenie agregatów może wpływać na przebieg procesów technologicznych, dystrybucję w środowisku oraz toksyczność konieczne jest przeprowadzenie systematycznych badań dotyczących właściwości powierzchniowych...
-
Self-organization of imidazolium ionic liquids in aqueous solution
PublikacjaW pracy przeanalizowano i podsumowano wyniki badań nad samoorganizacją oraz tworzeniem micel cieczy jonowych w roztworach wodnych otrzymane przez wiele zespołów badawczych. Średnio i długołańcuchowe imidazoliowe ciecze jonowe wykazują aktywność powierzchniową zależną od długości łańcucha alkilowego w kationie, analogicznie do kationowych surfaktantów. Wskazano na liczne zagadnienia, które wymagają dalszych systematycznych badań
Rok 2007
-
Aggregate formation of imidazolium ionic liquids in aqueous solution
PublikacjaCiecze jonowe (ILs) stanowią nową klasę związków o szerokich możliwościach przemysłowego zastosowania. Z przeglądu dostępnej literatury wynika, że niektóre ciecze jonowe tworzą agregaty w roztworach wodnych. Zrozumienie oddziaływań międzycząsteczkowych cieczy jonowych w środowisku wodnym jest niezbędne dla prawidłowego projektowania, przewidywania i kontroli ich właściwości jako współ-rozpuszczalników, a w konsekwencji procesów...
-
Thermodynamics of aggregation of 1-methyl-3-tetradecylimidazolium chloride in an aqueous solution
PublikacjaZbadano zależność agregacji chlorku 1-metylo-3-tetradecyloimidazoliowego w środowisku wodnym od temperatury. Wyznaczono krytyczne stężenie agregacji (CAC) oraz stopień jonizacji metodą pomiaru przewodnictwa właściwego. Otrzymane wyniki wykorzystano do predykcji parametrów termodynamicznych - entalpii swobodnej, entalpii i entropii, stosując phase separation model. Wykazano, że krzywa zależności CAC od temperatury jest U-kształtna...
Rok 2006
-
Transesterification of postfrying oils and utilization of the glycerol phase
PublikacjaPrzedstawiono metodę wytwarzania biodiesla z oleju posmażalniczego oraz zaproponowano sposób zagospodarowania gliceryny, powstającej jako produkt uboczny tego procesu. Wykazano, że odpadowy olej jadalny może stanowić substrat reakcji transestryfikacji prowadzącej do otrzymania EMKT. Przeprowadzono proces transestryfikacji zasadowej I i II- stopniowej oraz estryfikację kwaśną. Właściwości fizykochemiczne otrzymanego paliwa porównano...
wyświetlono 3793 razy