A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS

Abstrakt

The excessive wear of a journal shaft can be caused by many factors, for example, working conditions (e.g., temperaturę, slip speed, the type of lubricant), pressure, the type of material used on the bearings and shafts and their roughness, as well as contamination remaining in the system. This paper presents the roughness profiles co-operating with a rubber (NBR) and polytetrafluoroethylene (PTFE) bushes. The conditions of cooperation between the two materials tested in the sliding combination with the stainless steel journal were the same in each pair of bearings (PV); therefore, the comparison of their wear depends only on the material properties of the bush and the deformation of the journal shaft caused by the bending moment. To assess the size of the journal shaft, they were tested using a profilograph. In addition to the journal shaft, bearings were also evaluated, the wear level of which was noticed without the use of specialized equipment.

Cytowania

  • 1

    CrossRef

  • 0

    Web of Science

  • 0

    Scopus

Autor (1)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 167 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach recenzowanych i innych wydawnictwach ciągłych
Opublikowano w:
TRIBOLOGIA nr 283, strony 29 - 35,
ISSN: 0208-7774
Język:
angielski
Rok wydania:
2019
Opis bibliograficzny:
Piątkowska E.: A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS// TRIBOLOGIA. -Vol. 283., nr. 1 (2019), s.29-35
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.5604/01.3001.0013.1433
Bibliografia: test
  1. Sun J., Changlin G.: Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformation, Tribology International., Vol. 37, 2004, 841-848. otwiera się w nowej karcie
  2. Vulić N., Šestan A., Cvitnić V.: Modelling of propulsion shaft line and basic procedure of shafting Alignment calculation, Brodogradnja, Vol. 59, 2008, 223-227.
  3. Orndorff R.L.: Water lubricated rubber bearings, history and new developments, Naval Engineers Journal, Vol. 97, No. 7, 1985, 39-52. otwiera się w nowej karcie
  4. Orndorff R.L., Foster L., Sheppert R.: From lab to field: New high performance water lubricated bearings, World Tribology Congress III, Vol. 2, 2005, 55-56. otwiera się w nowej karcie
  5. Litwin W.: Influence of local bush wear on water lubricated sliding bearing load carrying capacity, Tribology International, Vol. 61, 2010, 130-141. otwiera się w nowej karcie
  6. Litwin W.: Influence of main design parameters of ship propeller shaft water-lubricated bearings on their properties, Polish Maritime Research 4(67), Vol. 17, 2010, 39-45. otwiera się w nowej karcie
  7. Litwin W.: Influence of local bush wear on properties of water lubricated marine stern tube bearings, Polish Maritime Research 1(68), Vol. 18, 2011, 32-36. otwiera się w nowej karcie
  8. Hua Xijin, Wang Jiaxu, Zhu Juanjan, Liu Wen Ji: Study on triological behawior of water-lubricated bearings, Journal of Advanced Manufacturing Systems, Vol. 7, No. 1, 2008, 115-121.
  9. Harish Hirani, Manish Verma, Tribological study of elastomeric bearings for marine propeller shaft system, Tribology International, Vol. 42, 2009, 378-390. otwiera się w nowej karcie
  10. Hirani H., Verma M.: Tribological study of elastomeric bearings for marine propeller shaft system, Tibology International, Vol. 42, 2009, 378-390. otwiera się w nowej karcie
  11. Polak A.: Przenoszenie materiału w łożysku ślizgowym stal-tworzywo sztuczne, Politechnika Krakowska im. Tadeusza Kościuszki, pp. 21-34, 1998, 109-135.
  12. Conglin Dong, Lichun Shi, Lvzhou Li, Xiuqin Bai, Chengqing Yuan, Yu Tian: Stick-slip of water-lubricated polymer stern tube bearing materials during starting process, Tribology International, Manuscript Draft. otwiera się w nowej karcie
  13. Kikkawa F., Uchida Y., Fujita K., Yano A., Kawazoe T., Sada H.: Study on damage of propeller shaft sleeve for seawater lubricated rubber bearing -2nd Report, Translated from Journal of the JIME, Vol. 43, No. 2, 2008. (Original Japanese) otwiera się w nowej karcie
  14. You-Qiang Wang, Xiu-Jiang Shi, Li-Jing Zhang: Experimental and numerical study on water-lubricated rubber bearings, Industrial Lubrication and Tribology, Vol. 66, Iss 2, 2014, 282-288. otwiera się w nowej karcie
  15. Šverko D., Šestan A.: Experimental determination of stern tube journal bearing behaviour, Brodo Gradnja, Vol. 61, 2010, 130-141.
  16. Litwin W.: Experimental research on water lubricated three layer sliding bearing with lubrication grooves in the upper part of the bush and its comparison with a rubber bearing, Tribology International, Vol. 82, 2015, 153-161. otwiera się w nowej karcie
  17. Kikkawa F.: Performance enhancement of seawater lubricated stern tube bearings -PTFE bearing optimal for environmental conservation and energy saving, Translated from Journal of the JIME, Vol. 46, No. 1, 2011. (Original Japanese) otwiera się w nowej karcie
  18. Piatkowska E.: Evaluating the influence of bending stress on a 1H18N9 steel shaft wear process in a water lubricated sliding bearing with a rubber bushing, Tribologia, Vol. 6, 2017, 79-85. otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

wyświetlono 240 razy

Publikacje, które mogą cię zainteresować

INFLUENCE OF SOLID PARTICLE CONTAMINATION ON THE WEAR PROCESS IN WATER LUBRICATED MARINE STRUT BEARINGS WITH NBR AND PTFE BUSHES

2021

The influence of polymer bearing material and lubricating grooves layout on wear of journal bearings lubricated with contaminated water

2023

EVALUATING THE INFLUENCE OF BENDING STRESS ON A 1H18N9 STEEL SHAFT WEAR PROCESS IN A WATER LUBRICATED SLIDING BEARING WITH A RUBBER BUSHING

2017

ATTEMPT AT EVALUATING THE INFLUENCE OF BENDING STRESS ON SHAFT WEAR PROCESSES IN WATER LUBRICATED SLIDING BEARING WITH A RUBBER BUSHING

2017
Meta Tagi