Wyszukiwarka
Abstrakt
The emission of airborne wear particles from friction material / cast iron pairs used in car brakes was investigated, paying special attention to the influence of temperature. Five low-metallic materials and one non-asbestos organic material were tested using a pin-on-disc machine. The machine was placed in a sealed chamber to allow airborne particle collection. The concentration and size distribution of 0.0056 to 10 μm particles were obtained by a fast mobility particle sizer and an optical particle sizer. The temperature was measured by a thermocouple installed in the disc. The experiments show that as the temperature increases from 100 to 300 °C the emission of ultrafine particles intensifies while that of coarse particles decreases. There is a critical temperature at which the ultrafine particle emission rate rises stepwise by 4 to 6 orders of magnitude. For the friction pairs investigated, the critical temperature was found to be between 165 and 190 °C. Below the critical temperature, fine particles outnumber coarse and ultrafine particles, although coarse particles make up the bulk of the particulate matter mass. The friction pairs differ in the ultrafine particle emission rate by 1 to 2 orders of magnitude. Above the critical temperature, ultrafine particles constitute almost 100% of the total particle number and their relative mass contribution can exceed 50%. Analysis of the particle size distributions revealed peaks at 0.19-0.29, 0.9 and 1.7 μm. Above the critical temperature, one more peak appears in the ultrafine particle range at 0.011-0.034 μm.
Cytowania
-
6 6
CrossRef
-
0
Web of Science
-
7 0
Scopus
Autorzy (4)
-
Mattia Alemani
-
-
Ibrahim Metinoz
-
Ulf Olofsson
Cytuj jako
Pełna treść
pełna treść publikacji nie jest dostępna w portalu
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
SAE International Journal of Materials and Manufacturing
nr 9,
strony 147 - 157,
ISSN: 1946-3979 - Język:
- angielski
- Rok wydania:
- 2016
- Opis bibliograficzny:
- Alemani M., Nosko O., Metinoz I., Olofsson U.: A Study on Emission of Airborne Wear Particles from Car Brake Friction Pairs// SAE International Journal of Materials and Manufacturing -Vol. 9,iss. 1 (2015), s.147-157
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.4271/2015-01-2665
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 111 razy
Publikacje, które mogą cię zainteresować
Airborne wear particle emission from train brake friction materials with different contents of steel and copper fibres
- Y. Tsybrii,
- I. Zglobicka,
- M. Kuciej
- + 2 autorów
A pin-on-disc study of airborne wear particle emissions from studded tyre on concrete road contacts
- U. Olofsson,
- M. Tu,
- O. Nosko
- + 2 autorów