An improved method for flow boiling heat transfer with account of the reduced pressure effect - Publikacja - MOST Wiedzy

Wyszukiwarka

An improved method for flow boiling heat transfer with account of the reduced pressure effect

Abstrakt

In the paper are presented the results using the authors own model to predict heat transfer coefficient during flow boiling. The model has been tested against a large selection of experimental data to investigate the sensitivity of the in-house developed model. In the work are presented the results of calculations obtained using the semi-empirical model on selected experimental flow boiling data of the refrigerants: R134a, R1234yf, R600a, R290, NH3, CO2, R236fa, R245fa, R152a, and HFE7000. In the present study, particular attention was focused on the influence of reduced pressure on the predictions of the theoretical model. The main purpose of this paper is to show the effect of the reduced pressure on the predictions of heat transfer during flow boiling.

Cytowania

  • 1

    CrossRef

  • 2

    Web of Science

  • 1

    Scopus

Cytuj jako

Pełna treść

pobierz publikację
pobrano 38 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Thermal Science nr 23, strony 1261 - 1272,
ISSN: 0354-9836
Język:
angielski
Rok wydania:
2019
Opis bibliograficzny:
Jakubowska B., Mikielewicz D.: An improved method for flow boiling heat transfer with account of the reduced pressure effect// Thermal Science -Vol. 23,iss. Supp. 4 (2019), s.1261-1272
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.2298/tsci19s4261j
Bibliografia: test
  1. ***, United Nations Environment Program (UNEP) Montreal Protocol on Substances that Deplete the Ozone Layer, 1997 (Final Act. United Nations, New York, USA) otwiera się w nowej karcie
  2. Ghodbane, M., An Investigation of R152a and Hydrocarbon Refrigerants in Mobile Air Conditioning, Proceedings, International Congress and Exposition, Detroit, Mich., USA, 1999, No. 1999-01-0874 otwiera się w nowej karcie
  3. Cheng, L., et al., New Prediction Methods for CO 2 Evaporation Inside Tubes: Part II -An Updated General Flow Boiling Heat Transfer Model Based on Flow Patterns, Int. J. Heat Mass Transf., 51 (2008), 1-2, pp. 125-135 otwiera się w nowej karcie
  4. Mikielewicz, D., Jakubowska, B., Prediction of Flow Boiling Heat Transfer Coefficient for Carbon Dioxide in Mini-Channels and Conventional Channels, Arch. Thermodyn., 37 (2016), 2, pp. 89-106 otwiera się w nowej karcie
  5. Jakubowska, B., et al.: An Improved Method for Flow Boiling Heat Transfer … S1270 THERMAL SCIENCE: Year 2019, Vol. 23, Suppl. 4, pp. S1261-S1272 otwiera się w nowej karcie
  6. Mikielewicz, D., Jakubowska, B., The Effect of Reduced Pressure on Carbon Dioxide Flow Boiling Heat Transfer in Mini-Channels, E3S Web Conf., 70 (2018), 2012 otwiera się w nowej karcie
  7. Mikielewicz, D., Jakubowska, B., Prediction of Flow Boiling Heat Transfer Data for R134a, R600a and R290 in Mini-Channels, Arch. Thermodyn., 35 (2014), 4, pp. 97-114 otwiera się w nowej karcie
  8. Wongwiess, S., Chimres, N., Experimental Study of Hydrocarbon Mixtures to Replace HFC-134a in a Domestic Refrigerator, Energ. Convers. Manag., 46 (2005), 1, pp. 85-100 otwiera się w nowej karcie
  9. Mikielewicz, D., Jakubowska, B., Calculation Method for Flow Boiling and Flow Condensation of R134a and R1234yf in Conventional and Small Diameter Channels, Polish Marit. Res., 24 (2017), Special Issue 2017 S1 (93), pp. 141-148 otwiera się w nowej karcie
  10. Azzolin, M., et al., Flow Boiling Heat Transfer of a Zeotropic Binary Mixture of New Refrigerants Inside a Single Microchannel, Int. J. Therm. Sci., 110 (2016), Dec., pp. 83-95 otwiera się w nowej karcie
  11. Sempertegui-Tapia, D. F., et al., Two-Phase Frictional Pressure Drop in Horizontal Micro-Scale Channels : Experimental Data Analysis and Prediction Method Development, Int. J. Refrig., 79 (2017), July, pp. 143-163 otwiera się w nowej karcie
  12. Ribatski, G., A Critical Overview on the Recent Literature Concerning Flow Boiling and Two-Phase Flows Inside Micro-Scale Channels, Exp. Heat Transf., 26 (2013), 2-3, pp. 198-246 otwiera się w nowej karcie
  13. Kharangate, C. R., Mudawar, I., Review of Computational Studies on Boiling and Condensation, Int. J. Heat Mass Transf., 108 (2017), Part A, pp. 1164-1196 otwiera się w nowej karcie
  14. Cheng, L., Xia, G., Fundamental Issues , Mechanisms and Models of Flow Boiling Heat Transfer in Microscale Channels, Int. J. Heat Mass Transf., 108 (2017), Part A, pp. 97-127 otwiera się w nowej karcie
  15. Ong, C. I., Thome, J. R., Flow Boiling Heat Transfer of R134a, R236f and R245fa in a Horizontal 1.030 Mm Circular Channel, Exp. Therm. Fluid Sci., 33 (2009), 4, pp. 651-663 otwiera się w nowej karcie
  16. Mikielewicz, J., Semi-Empirical Method of Determining the Heat Transfer Coefficient for Subcooled Staurated Boiling in a Channel, Int. J. Heat Transf., 17 (1973), 10, pp. 1129-1134 otwiera się w nowej karcie
  17. Mikielewicz, D., Mikielewicz, J., A Common Method for Calculation of Flow Boiling and Flow Condensation Heat Transfer Coefficients in Mini-Channels with Account of Nonadiabatic Effects, Heat Transf. Eng., 32 (2011), 13-14, pp. 1173-1181 otwiera się w nowej karcie
  18. Mikielewicz, D., et al., Improved Semi-Empirical Method for Determination of Heat Transfer Coefficient in Flow Boiling in Conventional and Small Diameter Tubes, Int. J. Heat Mass Transf., 50 (2007), 19-20, pp. 3949-3956 otwiera się w nowej karcie
  19. Mikielewicz, D., et al., A General Method for Calculation of Two-Phase Flow Pressure Drop in Flow Boiling and Flow Condensation, Proceedings, ECI 8 th Int. Conference on Boiling and Condensation Heat Transfer, Lausanne, Switzerland, 2012 otwiera się w nowej karcie
  20. Mikielewicz, D., et al., Analytical Model with Nonadiabatic Effects for Pressure Drop and Heat Transfer During Boiling and Condensation Flows in Conventional Channels and Mini-channels, Heat Transf. Eng., 37 (2016), 13-14, pp. 1158-1171 otwiera się w nowej karcie
  21. Mikielewicz, J., Mikielewicz, D., A Simplified Energy Dissipation Based Model of Heat Transfer for Post -dryout Flow Boiling, Int. J. Heat Mass Transf., 124 (2018), Sept., pp. 260-268 otwiera się w nowej karcie
  22. Muller-Steinhagen, H., Heck, K., A Simple Friction Pressure Drop Correlation for Two-phase Flow in Pipes, Chem. Eng. Prcoess, 20 (1986), 6, pp. 197-308 otwiera się w nowej karcie
  23. Mikielewicz, D., A New Method for Determination of Flow Boiling Heat Transfer Coefficient in Conventional Diameter Channels and Mini-Channels, Heat Transf. Eng., 31 (2010), 4, pp. 276-287 otwiera się w nowej karcie
  24. Zhang, M., Webb, R. L., Correlation of Two-phase Friction for Refrigerants in Small-Diameter Tubes, Exp. Therm. Fluid Sci., 25 (2001), 3-4, pp. 131-139 otwiera się w nowej karcie
  25. Cioncolini, A., Unified Macro-to-Microscale Method to Predict Two-Phase Frictional Pressure Drops of Annular Flows, Int. J. Multiph. Flow, 35 (2009), 12, pp. 1138-1148 otwiera się w nowej karcie
  26. Tran, T. N., et al., Two-Phase Pressure Drop of Refrigerants During Flow Boiling in Small Channels: An Experimental Investigation and Correlation Development, Int. J. Refrig., 26 (2000), 11, pp. 1739-1754 otwiera się w nowej karcie
  27. Friedel, L., Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two-Phase Pipe Flow, Proceedings, European Two-Phase Flow Group Meeting, Ispra, Italy, 1979, Paper E2
  28. Kundu, A., et al., Heat Transfer Characteristic and Flow Pattern During Two-Phase Flow Boiling of R134a and R407C in a Horizontal Smooth Tube, Exp. Therm. Fluid Sci., 57 (2014), Sept., pp. 344- 352 otwiera się w nowej karcie
  29. Xu, Y., et al., An Experimental Study of Flow Boiling Frictional Pressure Drop of R134a and Evaluaition of Existing Correlations, Int. J. Heat Mass Transf., 98 (2016), July, pp. 150-163 otwiera się w nowej karcie
  30. Mancin, S., et al., R134a Flow Boiling Heat Transfer Coefficient and Pressure Drop Inside 3.4 Mm ID Microfin Tube, Energy Procedia, 45 (2014), Dec., pp. 6098-615 otwiera się w nowej karcie
  31. Tibirica, C. B., Ribatski, G., An Experimental Study on Flow Boiling Heat Transfer of R134a in a 2.3 Mm Tube, Int. J. Microsc. Nanosc. Therm. Fluid Transp. Phenom.v, 1 (2010), Feb., pp. 37-58
  32. Owhaib, W., Experimental Heat Transfer, Pressure Drop, and Flow Visualization of R-134a in Vertical Mini / Micro Tubes, Pd. D thesis, School of Industrial Engineering and Management, Energy Technology, Applied Thermodynamics and Refrigeration, KTH, Stockholm, Sweden 2007 otwiera się w nowej karcie
  33. Shiferaw, D., et al., Flow Boiling in a 1.1 mm Tube with R134a: Experimental Results and Comparison with Model, Int. J Therm. Sci., 48 (2009), 2, pp. 331-341 otwiera się w nowej karcie
  34. Martin-Callizo, C., et al., New Experimental Results of Flow Boiling of R134a in Vertical Microchannel, Proceedings, Heat Transfer Conference Proceedings, Edinburgh, UK, 2007
  35. Consolini, L., Thome, J. R., Micro-Channel Flow Boiling Heat Transfer or R134a, R236fa and R245fa, Microfluid Nanofluid, 6 (2009), 6, pp. 731-746 otwiera się w nowej karcie
  36. Mahmoud, M. M., et al., Single and Two Phase Heat Transfer and Pressure Drop in a 0.52 mm Vertical Metallic Tube, Proceedings, 7 th Int. Conference in Enhanced, Compact and Ultra-compact Heat Exchangers: From Microscale Phenomena to Industrial Applications, Heredia, Costa Rice
  37. Anwar, Z., Flow Boiling Heat Transfer, Pressure Drop and Dryout Characteristics of Low GWP Refrigerants in a Vertical Mini-Channel, Ph. D. thesis, Royal Institute of Technology, Stockholm, Sweden, 2014 otwiera się w nowej karcie
  38. Del Col, D., et al., Flow Boiling of R1234yf in a 1 mm Diameter Channel, Proceedings, 23 rd IIR International Congres of Refrigeration, Prague, Czech Republic, 2011 otwiera się w nowej karcie
  39. Choi, K.-I., et al., Boiling Heat Transfer of R22, R134a and CO 2 in Horizontal Smooth Mini-Channels, Int. J. Refrig., 30 (2007), 8, pp. 1336-1346 otwiera się w nowej karcie
  40. Diani, A., et al., Flow Boiling Heat Transfer of R1234yf Inside 3.4 mm ID Microfin Tube, Exp. Therm. Fluid Sci., 66 (2015), Sept., pp. 127-136 otwiera się w nowej karcie
  41. Wang, C. C., et al., Visual Observation of Two-Phase Flow Pattern of R-22, R-134a, and R-407C in a 6.5-mm Smooth Tube, Exp Therm. Fluid Sci, 15 (1997), 4, pp. 395-405 otwiera się w nowej karcie
  42. Pamitran, A. S., et al., Evaporation Heat Transfer Coefficient in Single Circular Small Tubes for Flow Natural Refrigerants of C3H8, NH3 and CO 2 , Int. Multiph. Flow, 37 (2011), 7, pp. 794-801 otwiera się w nowej karcie
  43. Pamitran, A. S., et al., Characteristics of Two-Phase Flow Pattern Transitions and Pressure Drop of Five Refrigerants in Horizontal Circular Small Tubes, Int. J. Refrig., 33 (2010), 3, pp. 578-588 otwiera się w nowej karcie
  44. Docoulombier, M., et al., Carbon Dioxide Flow Boiling in a Single Microchannel -Part II: Heat Transfer, Exp. Therm. Fluid Sci., 35 (2011), 4, pp. 597-611 otwiera się w nowej karcie
  45. Mastrullo, R., et al., Carbon Dioxide Heat Transfer Coefficients and Pressure Drops During Flow Boiling: Assessment of Predictive Methods, Int. J. Refrig., 33 (2010), 6, pp. 1068-1085 otwiera się w nowej karcie
  46. Oh, H.-K., Son, C. H., Flow Boiling Heat Transfer and Pressure Drop Characteristics of CO 2 in Horizontal Tube of 4.57 mm Inner Diameter, Appl. Therm. Eng., 31 (2011), 2-3, pp. 163-172 otwiera się w nowej karcie
  47. Dang, C., et al., Flow Boiling Heat Transfer of Carbon Dioxide Inside a Small-Sized Microfin Tube, Int. J. Refrig, 33 (2010), 4, pp. 655-663 otwiera się w nowej karcie
  48. Zhao, X., Bansal, P. K., Flow Boiling Heat Transfer Characteristic of C O2 at Low Temperatures, Int. J. Refrig., 30 (2007), 6, pp. 937-945 otwiera się w nowej karcie
  49. Tibirica, C. B., et al., Experimental Investigation of Flow Boiling Pressure Drop of R134q in Microscale Horizontal Smooth Tube, J.Therm. Sci. Eng. Appl., 3 (2011), 1, pp. 11006-1-11006-8
  50. Mikielewicz, D., Jakubowska, B., Comparison of Predictive Methods for Flow Boiling Heat Transfer in Conventional Channels and Mini-channels -The Effect of Reduced Pressure, MATEC Web Conf., 240 (2018), 1028 otwiera się w nowej karcie
  51. Jakubowska, B., et al.: An Improved Method for Flow Boiling Heat Transfer … S1272 THERMAL SCIENCE: Year 2019, Vol. 23, Suppl. 4, pp. S1261-S1272 otwiera się w nowej karcie
  52. Kew, P. A., Cornwell, K., Correlations for the Prediction of Boiling Heat Transfer in Small Diameter Channels, Appl. Therm. Eng, 17 (1997), 8-10, pp. 705-715 otwiera się w nowej karcie
  53. Belyaev, A. V, et al., An Experimental Study of Flow Boiling in Mini-Channels at High Reduced Pressure, Int. J. Heat Mass Transf., 110 (2017), July, pp. 360-373 otwiera się w nowej karcie
  54. Mauro, A. W., Flow Boiling of Refrigerants: From Low to High Reduced Pressure, Proceedings, UIT Summer School, Siena, Italy, 2017
  55. Cooper, M. G., Saturation Nucleate Pool Boiling-a Simple Correlation, Int. Chem. Eng. Symp. Ser., 86 (1984), Dec., pp. 785-792 otwiera się w nowej karcie
  56. Wajs, J., et al., Performance of the Domestic Micro ORC Equipped with the Shell-and-Tube Condenser with Mini-Channels, Energy, 157 (2018), Aug., pp. 853-861 otwiera się w nowej karcie
  57. Andrzejczyk, R., et al., Experimental Investigations on Adiabatic Frictional Pressure Drops of R134a During Flow in 5 mm Diameter Channel, Exp. Therm. Fluid Sci., 83 (2016), May, pp. 78-87 otwiera się w nowej karcie
  58. Muszynski, T., et al., Detailed Experimental Investigations on Frictional Pressure Drop of R134a During Flow Boiling in 5 mm Diameter Channel: The Influence of Acceleration Pressure Drop Component, Int. J. Refrig., 82 (2017), Oct., pp. 163-173 otwiera się w nowej karcie
  59. Paper submitted: January 14, 2019 © 2019 Society of Thermal Engineers of Serbia. Paper revised: February 28, 2019 Published by the Vinča Institute of Nuclear Sciences, Belgrade, Serbia. Paper accepted: April 10, 2019 otwiera się w nowej karcie
Źródła finansowania:
Weryfikacja:
Politechnika Gdańska

wyświetlono 127 razy

Publikacje, które mogą cię zainteresować

Meta Tagi