Corrosion performance of super duplex stainless steel and pipeline steel dissimilar welded joints: a comprehensive investigation for marine structures
Abstrakt
This study investigates the corrosion behavior of dissimilar gas tungsten arc (GTA) welded joints between super duplex stainless steel (sDSS 2507) and pipeline steel (X-70) using electrochemical and immersion corrosion tests. The GTA welds were fabricated using ER2594 and ER309L fller metals. The study examined the electrochemical characteristics and continuous corrosion behavior of samples extracted from various zones of the weldments in a 3.5 wt.% NaCl solution, employing electrochemical impedance spectroscopy, potentiodynamic polarization methods, and an immersion corrosion test. EIS and immersion investigations revealed pitting corrosion in the X-70 base metal/X-70 heat-afected zone, indicating inferior overall corrosion resistance due to galvanic coupling. The corrosion byproducts identifed in complete immersion comprised α-FeOOH, γ-FeOOH, Fe3O4, and Fe2O3, whereas γ-FeOOH and Fe3O4 were predominant in dry/wet cyclic conditions. Corrosion escalated with dry/wet cycle conditions while maintaining a lower level in complete immersion. The corrosion mechanism involves three wet surface stages in dry/wet cycles and typical oxygen absorption during complete immersion. Proposed corrosion models highlight the infuence of Cl−, O2, and rust layers.
Cytowania
-
0
CrossRef
-
0
Web of Science
-
0
Scopus
Autorzy (5)
Cytuj jako
Pełna treść
pełna treść publikacji nie jest dostępna w portalu
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
nr 135,
strony 1009 - 1033,
ISSN: 0268-3768 - Język:
- angielski
- Rok wydania:
- 2024
- Opis bibliograficzny:
- Maurya A. K., Pandey S. M., Chhibber R., Fydrych D., Pandey C.: Corrosion performance of super duplex stainless steel and pipeline steel dissimilar welded joints: a comprehensive investigation for marine structures// INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY -,iss. 1-2 (2024), s.1009-1033
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00170-024-14596-3
- Źródła finansowania:
-
- Publikacja bezkosztowa
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 18 razy
Publikacje, które mogą cię zainteresować
Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides
- H. Gerengi,
- Y. Kocak,
- A. Jażdżewska
- + 1 autorów