Wyszukiwarka
Effect of processing parameters on the cyclic behaviour of aluminium friction stir welded to spark plasma sintered aluminium matrix composites with bimodal micro-and nano-sized reinforcing alumina particles
Abstrakt
Understanding the cyclic behaviour of Alumina reinforced Aluminium composites (Al-A2O3) was of critical importance, for their further application in the different industrial sectors. The present study is focussing on the cyclic behaviour of the Al-Alumina nanocomposite produced through the combination of spark plasma sintering (SPS) method and friction stir welding (FSW). The added Alumina with total content of 10% is the combination of nano and micro-sized particles and its ratio differ for each sample. The microstructure of the SPSed samples is characterized using optical microscopy (OM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). The microstructure of the processed composite samples is characterized and its mechanical behaviour is studied. Microstructural studies showed that nano sized particles of Alumina were mostly distributed along the grain boundaries and inside the grains, while micron-sized ones mostly settled on the grain boundaries. In addition, the hardness and tensile properties of the produced samples are analysed concerning the reinforcement size and the percentage of nanoparticles addition. The obtained results reveal that the mechanical and fatigue properties of the nanocomposite materials mainly depend on the material properties at the initial stage and the applied conditions of friction stir welding such as rotating speed and movement speed. The facture surface of the nanocomposites revealed a combined ductile–brittle fracture mode with finer dimples with emphasis on the pronounced role of nano-metric dispersoids.
Cytowania
-
8
CrossRef
-
0
Web of Science
-
8
Scopus
Autorzy (8)
-
Behzad Sadeghi
- Centre of Excellence for Advanced Materials Application, Slovak Academy of Sciences, Dubravska Cesta 9, 84511 Bratislava, Slovak Republic
-
Pasquale Cavaliere
- Department of Innovation Engineering, University of Salento, Via per Arnesano, 73100 Lecce, Italy
-
Angelo Perrone PhD
- Department of Innovation Engineering, University of Salento, Via per Arnesano, 73100 Lecce, Italy
-
Gianni Blasi
- Department of Innovation Engineering, University of Salento, Via per Arnesano, 73100 Lecce, Italy
-
Arun Gopinathan
- Institute of Materials and Machine Mechanics, The Slovak Academy of Sciences, Dubravska cesta 9, 84513 Bratislava, Slovak Republic
-
M. Shamanian
- Department of Material Engineering, Isfahan University of Technology, Isfahan, Iran
-
F. Ashrafizadeh
- Department of Material Engineering, Isfahan University of Technology, Isfahan, Iran
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.matchar.2022.112535
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
MATERIALS CHARACTERIZATION
nr 195,
ISSN: 1044-5803 - Język:
- angielski
- Rok wydania:
- 2023
- Opis bibliograficzny:
- Sadeghi B., Cavaliere P., Laska A., Perrone A., Blasi G., Gopinathan A., Shamanian M., Ashrafizadeh F.: Effect of processing parameters on the cyclic behaviour of aluminium friction stir welded to spark plasma sintered aluminium matrix composites with bimodal micro-and nano-sized reinforcing alumina particles// MATERIALS CHARACTERIZATION -Vol. 195, (2023), s.112535-
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.matchar.2022.112535
- Źródła finansowania:
-
- Publikacja bezkosztowa
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 174 razy
Publikacje, które mogą cię zainteresować
Assessment of Corrosive Behaviour and Microstructure Characterization of Hybrid Friction Stir Welded Martensitic Stainless Steel
- D. G. Mohan,
- S. Gopi,
- J. Tomków
- + 1 autorów
Investigation of Mechanical and Microstructural Properties of Welded Specimens of AA6061-T6 Alloy with Friction Stir Welding and Parallel Friction Stir Welding Methods
- A. Ghiasvand,
- M. M. Yavari,
- J. Tomków
- + 5 autorów
Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
- S. Memon,
- J. Tomków,
- H. A. Derazkola