Experimental and Numerical Study on Mechanical Characteristics of Aluminum/Glass Fiber Composite Laminates
Abstrakt
The fiber-metal composites made of aluminum sheets and glass fibers reinforced with a polyester resin as the matrix were studied. The composites were prepared by hand lay-up method. Some aspects of manufacturing affecting the composite behavior were considered. In particular, the influences of the arrangement of layers and their number on the mechanical and physical properties of composites with ten different compositions were investigated. In addition two different densities of glass fibers were considered. The tensile modulus, tensile and impact strengths were determined following ASTM D3039 and ASTM D6110 standards. The results obtained show that the arrangement of the laminate layers influences Young’s modulus and the tensile strength of the composite. The impact test results of the laminated structure reinforced with glass fibers illustrate a significant increase in the impact strength owing to adding the glass fibers compared to the control specimens. The simulations of tests using ABAQUS-based FEA were performed.
Cytowania
-
5
CrossRef
-
0
Web of Science
-
5
Scopus
Autorzy (6)
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s11029-023-10072-3
- Licencja
- Copyright (2023 Springer Nature Switzerland AG)
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
MECHANICS OF COMPOSITE MATERIALS
nr 58,
strony 835 - 844,
ISSN: 0191-5665 - Język:
- angielski
- Rok wydania:
- 2023
- Opis bibliograficzny:
- Golmakani M. E., Wiczenbach T., Malikan M., Karimi E. Z., Masoumi M., Eremeev V.: Experimental and Numerical Study on Mechanical Characteristics of Aluminum/Glass Fiber Composite Laminates// MECHANICS OF COMPOSITE MATERIALS -,iss. 6 (2023), s.835-844
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s11029-023-10072-3
- Źródła finansowania:
-
- Publikacja bezkosztowa
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 126 razy
Publikacje, które mogą cię zainteresować
Comparative Study of the Reinforcement Type Effect on the Thermomechanical Properties and Burning of Epoxy-Based Composites
- K. Salasinska,
- M. Barczewski,
- J. Aniśko
- + 2 autorów
The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites
- M. Barczewski,
- O. Mysiukiewicz,
- A. Hejna
- + 5 autorów