Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys

Abstrakt

Surface modification of the titanium and its alloys used in implantology with a long-pulse laser can change the surface topography, but it also leads to changes in the stress sign and magnitude in the resulting subsurface layer. The presented research was aimed at evaluating the state of stress after laser remelting with the Nd:YAG laser of pre-etched titanium alloys Ti6Al4V and Ti13Nb13Zr and pure titanium. The obtained surface layers were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), optical profilography, and nanoindentation studies. Based on the results obtained after the nanoindentation tests, the character of the stresses generated in the melted layers was calculated and determined. Laser processing resulted in surface layer thicknesses between 191-320 µm and surface roughness Ra between 2.89-5.40 µm. Laser processing caused increasing hardness, and its highest value was observed for the titanium alloy Ti13Nb13Zr - 5.18 GPa. The tensile stresses appeared following laser treatment and increased with elevating laser power up to the highest value for titanium.

Cytowania

  • 0

    CrossRef

  • 0

    Web of Science

  • 2

    Scopus

Autorzy (4)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 34 razy
Wersja publikacji
Accepted albo Published Version
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.12913/22998624/172981
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Advances in Science and Technology Research Journal nr 17, strony 27 - 38,
ISSN: 2080-4075
Język:
angielski
Rok wydania:
2023
Opis bibliograficzny:
Jażdżewska M., Majkowska-Marzec B., Ostrowski R., Olive J.: Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys// Advances in Science and Technology Research Journal -Vol. 17,iss. 6 (2023), s.27-38
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.12913/22998624/172981
Źródła finansowania:
  • Działalność statutowa/subwencja
Weryfikacja:
Politechnika Gdańska

wyświetlono 100 razy

Publikacje, które mogą cię zainteresować

Effect of Laser Treatment on Intrinsic Mechanical Stresses in Titanium and Some of Its Alloys

2023

Mechanical Properties and Wear Susceptibility Determined by Nanoindentation Technique of Ti13Nb13Zr Titanium Alloy after “Direct Laser Writing”

2023

Mechanical Properties and Residual Stress Measurements of Grade IV Titanium and Ti-6Al-4V and Ti-13Nb-13Zr Titanium Alloys after Laser Treatment

2021

Effect of pulse laser treatment at different process variables on mechanical behavior of carbon nanotubes electrophoretically deposited on titanium alloy

2023
Meta Tagi