Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide

Abstrakt

In this study, thermally reduced graphene oxide (TRG)-containing polyurethane nanocomposites were obtained by the extrusion method. The content of TRG incorporated into polyurethane elastomer systems equaled 0.5, 1.0, 2.0 and 3.0 wt%. The morphology, static and dynamic mechanical properties, and thermal stability of the modified materials were investigated. The application of TRG resulted in a visible increase in material stiffness as confirmed by the measurements of complex compression modulus (E’) and glass transition temperature (Tg). The Tg increased with increasing content of nanofiller in the thermoplastic system. The addition of thermally reduced graphene oxide had a slight effect on thermal stability of the obtained materials. The incorporation of 0,5, 1.0, 2,0 and 3.0 wt% of TRG into a system resulted in increased char residues compared to unmodified PU elastomer. Also, this study demonstrated that after exceeding a specific amount of TRG, the physicomechanical properties of modified materials start to deteriorate.

Cytowania

  • 2 1

    CrossRef

  • 0

    Web of Science

  • 2 0

    Scopus

Autorzy (4)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 42 razy
Wersja publikacji
Accepted albo Published Version
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1515/pjct-2015-0073
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuł w czasopiśmie wyróżnionym w JCR
Opublikowano w:
Polish Journal of Chemical Technology nr 17, wydanie 4, strony 88 - 94,
ISSN: 1509-8117
Język:
angielski
Rok wydania:
2015
Opis bibliograficzny:
Strankowski M., Piszczyk Ł., Kosmela P., Korzeniewski P.: Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide // Polish Journal of Chemical Technology. -Vol. 17, iss. 4 (2015), s.88-94
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1515/pjct-2015-0073
Weryfikacja:
Politechnika Gdańska

wyświetlono 151 razy

Publikacje, które mogą cię zainteresować

Study of the effect of thermally reduced graphene oxide on the physical and mechanical properties of flexible polyurethane foams

2015

Morphology, Mechanical and Thermal Properties of Thermoplastic Polyurethane Containing Reduced Graphene Oxide and Graphene Nanoplatelets

2018

Effect of Variation of Hard Segment Content and Graphene-Based Nanofiller Concentration on Morphological, Thermal, and Mechanical Properties of Polyurethane Nanocomposites

2018

Polyurethane Nanocomposites Containing Reduced Graphene Oxide, FTIR, Raman, and XRD Studies

2016
Meta Tagi