RESEARCH ON ORGANIC COATINGS DESIGNED FOR UNDERWATER APPLICATIONS - Publikacja - MOST Wiedzy

Wyszukiwarka

RESEARCH ON ORGANIC COATINGS DESIGNED FOR UNDERWATER APPLICATIONS

Abstrakt

Underwater steel structures require periodic maintenance. In the case of vessels, anti-corrosion works are carried out in the shipyard, where very good conditions for applying organic protective coatings can be provided. Very good surface preparation can be obtained by the use of abrasive blasting. The well-prepared metal surface is free from impurities (particularly inorganic salts). Suitable conditions for the application and renovation of coatings are also ensured (creating appropriate climatic conditions, drying the air, setting the appropriate air temperature). However, there are underwater constructions that cannot be transferred above the water level and, therefore, their conservation against corrosion can take place only under the surface of the water, which significantly hinders the execution of renovation works. In this work, protective coatings for underwater application were tested. The application of coatings on selected steel surfaces over and under the water was carried out. Physico-mechanical and electrochemical tests were carried out in order to assess the quality of the obtained corrosion protection. The possible difficulties faced when applying coatings in marine conditions were discussed.

Cytowania

  • 0

    CrossRef

  • 0

    Web of Science

  • 3

    Scopus

Cytuj jako

Pełna treść

pobierz publikację
pobrano 87 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
ARCHIVES OF METALLURGY AND MATERIALS nr 65, strony 169 - 174,
ISSN: 1733-3490
Język:
angielski
Rok wydania:
2020
Opis bibliograficzny:
Orlikowski J., Jażdżewska A., Jurak K.: RESEARCH ON ORGANIC COATINGS DESIGNED FOR UNDERWATER APPLICATIONS// ARCHIVES OF METALLURGY AND MATERIALS -Vol. 65,iss. 1 (2020), s.169-174
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.24425/amm.2019.131111
Weryfikacja:
Politechnika Gdańska

wyświetlono 210 razy

Publikacje, które mogą cię zainteresować

Meta Tagi