Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin - Publikacja - MOST Wiedzy

Wyszukiwarka

Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin

Abstrakt

Slow-breaking monophase cationic bitumen emulsions have been produced on the basis of bitumen modified with phenol-cresol-formaldehyde resin (PhCR-F). Bitumen emulsions were used as a binder for thin-layer coatings with slurry surfacing mixes (SSM). Physical and technical parameters of modified and unmodified emulsions were determined and analyzed. The optimal compositions of SSM were selected according to the breaking criterion. The values of SSM wet track abrasion were determined. It was found that the addition of PhCR-F allows to improve the adhesion properties of the thin-layer coatings.

Cytowania

  • 2 8

    CrossRef

  • 0

    Web of Science

  • 2 7

    Scopus

Autorzy (7)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 97 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Copyright (2020 Lviv Polytechnic National University)

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Chemistry & Chemical Technology nr 14, strony 251 - 256,
ISSN: 1996-4196
Język:
angielski
Rok wydania:
2020
Opis bibliograficzny:
Demchuk Y., Gunka V., Pyshyev S., Sidun I., Hrynchuk Y., Kucińska-Lipka J., Bratychak M.: Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin// Chemistry & Chemical Technology -Vol. 14,iss. 2 (2020), s.251-256
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.23939/chcht14.02.251
Weryfikacja:
Politechnika Gdańska

wyświetlono 90 razy

Publikacje, które mogą cię zainteresować

Meta Tagi