Submicron inorganic particles as an additional filler in hybrid epoxy matrix composites reinforced with glass fibres - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Submicron inorganic particles as an additional filler in hybrid epoxy matrix composites reinforced with glass fibres

Abstrakt

In this study, the effect of selected submicron metal oxide (zinc oxide, titanium oxide) or non-metal oxide (silicon dioxide) particles on mechanical and thermo-mechanical properties of epoxy/glass composites was investigated. The applied epoxy resin was a diglycidyl ether of bisphenol-A cured with triethylenetetramine. As a reinforcement twill weave E-glass fabric was used. Hybrid composites (contained particulate and fibrous filler) were fabricated by using the hand lay-up method and the average content of glass fibres was 39–41 wt%. Flexural properties, thermo-mechanical properties, abrasion resistance and hardness were determined for each group of the prepared hybrid epoxy/glass composites. The obtained results were compared with control samples (without submicron particles). Investigations showed that the addition of 2 wt% SiO2, 4 wt% TiO2 or 4 wt% ZnO to epoxy resin improved the flexural strength and the flexural modulus of composites. Dynamic mechanical analysis showed that the addition of the mentioned particles enhanced storage and loss modulus. It can be attributed to the good dispersion and good interaction between submicron-mentioned particles and the epoxy matrix.

Cytowania

  • 6

    CrossRef

  • 0

    Web of Science

  • 8

    Scopus

Autorzy (4)

Cytuj jako

Pełna treść

pełna treść publikacji nie jest dostępna w portalu

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
POLYMERS & POLYMER COMPOSITES nr 28, strony 484 - 491,
ISSN: 0967-3911
Język:
angielski
Rok wydania:
2020
Opis bibliograficzny:
Włoch M., Bagiński F., Koziński P., Datta J.: Submicron inorganic particles as an additional filler in hybrid epoxy matrix composites reinforced with glass fibres// POLYMERS & POLYMER COMPOSITES -Vol. 28,iss. 7 (2020), s.484-491
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1177/0967391119887570
Weryfikacja:
Politechnika Gdańska

wyświetlono 69 razy

Publikacje, które mogą cię zainteresować

Mechanical, thermo-mechanical properties of epoxy/glass composites with submicron particles

2013

Influence of selected submicron inorganic particles on mechanical and thermo-mechanical properties of unsaturated polyester/glass composites

2014

Mechanical and thermo-mechanical properties of natural rubber composites filled with submicron- and nano-sized silica particles and prepared using glycolysate as a plasticizer

2017

Effect of high loading of titanium dioxide particles on the morphology and selected properties of natural rubber-based composites

2016
Meta Tagi