Wyszukiwarka
Filtry
wszystkich: 104
Wyniki wyszukiwania dla: HAZARD IN TRANSPORT
-
Passive Methods in Heat Transport
Kursy Online -
Measurements in civil engineering, transport, environmental engineering, mining and power engineering 22/23
Kursy OnlineThe course is primarily open to all PhD students at Gdansk University of Technology. This course is compulsory for PhD students assigned to Civil Engineering and Transport as well as Environmental Engineering, Mining and Power Engineering tracks at Doctoral School of GUT. This course allows the PhD students to obtain the knowledge related to the experimental equipment and types of experiments carried out at GUT in the field of...
-
Passive Methods in Heat Transport, W/P, DPE, sem.5, zimowy 22/23
Kursy Online -
Measurements in civil engineering, transport, environmental engineering, mining and power engineering 23/24
Kursy OnlineThe course is primarily open to all PhD students at Gdansk University of Technology. This course is compulsory for PhD students assigned to Civil Engineering and Transport as well as Environmental Engineering, Mining and Power Engineering tracks at Doctoral School of GUT. This course allows the PhD students to obtain the knowledge related to the experimental equipment and types of experiments carried out at GUT in the field of...
-
Passive methods in heat transport, W/P, DPE, sem.05, zima 21/22, (M:320404W0)
Kursy Online -
Passive Methods in Heat Transport, W/P, DaPE, sem.5, zimowy 22/23, (PMiHT, W/P, zima 22/23)
Kursy Online -
Identification of safety hazards and their sources in tram transport
PublikacjaBoth in Poland and in most countries of the European Union, the tram infrastructure is extensively expanding. Contemporary low-floor trams are constructed according to different technical assumptions than typical railway vehicles or high floor trams. In Poland such vehicles rides often on lines designed according to standards developed to the classical vehicles. At the same time, the intensity of road traffic and the number of...
-
Mapping of Flood-Prone Areas Utilizing GIS Techniques and Remote Sensing: A Case Study of Duhok, Kurdistan Region of Iraq
PublikacjaOne of the most common types of natural disaster, floods can happen anywhere on Earth, except in the polar regions. The severity of the damage caused by flooding can be reduced by putting proper management and protocols into place. Using remote sensing and a geospatial methodology, this study attempts to identify flood-vulnerable areas of the central district of Duhok, Iraq. The analytical hierarchy process (AHP) technique was...
-
Sources and Fate of PAHs and PCBs in the Marine Environment
PublikacjaThe assessment of a hazard resulting from the pollution of the environment by chemical compounds is in principle limited to the determination of their concentrations in its various compartments. But for solving many problems in this context, knowledge of the emission sources, transport pathways, and sites of deposition is of great benefit. By far the largest amounts of pollutants, regardless of where they were discharged, end up...
-
Assessing the Effects of the Road Surface and Weather Conditions on Road Safety
PublikacjaWhen transport is analysed for its safe delivery the focus is mainly on assessing the safety of roads and the risk of undesired events. These include road accidents, an occurrence which is relatively rare and random. Randomness means that accidents depend on several factors which are partly deterministic (can be controlled) and partly stochastic (random and unpredictable). The set of crash contributing factors can be classified...
-
Towards Safety Case Integration with Hazard Analysis for Medical Devices
PublikacjaSafety case is one of system safety lifecycle products and should be consistent with other lifecycle products like hazard analysis results. In this paper we present a method of safety case integration with hazard tables based on the use of parametrized argument patterns. We describe a hazard table metamodel, a safety argument pattern and a mechanism of pattern instantiation using a linking table which represents references to system...
-
Inter Applied Chemistry Programme 5 Intorduction to hazard assessment of chemicals Marta Markiewicz
Kursy OnlineInter Applied Chemistry Programme 5 Intorduction to hazard assessment of chemicals Marta Markiewicz Marta Markiewicz obtained a Master’s degree in Biotechnological Engineering in 2007 from Koszalin University of Technology with the thesis focusing on recovery of native proteins from industrial waste streams using preparative ion-exchange chromatography. Subsequently she obtained a PhD in Technical Science (2012) from Gdańsk...
-
Induced Sheath Voltages In 110 Kv Power Cables – Case Study
PublikacjaThe paper considers shock hazard due to induced sheath voltages in 110 kV power cables. Various configurations of the metallic sheaths bonding and earthing (single-point bonding, both-ends bonding, cross-bonding) are analysed. Taking into account shock hazard and ability of the system to power transfer an optimal configuration is proposed.
-
LabVIEW-based intelligent system of protection against electric shock for photovoltaic installations
PublikacjaEvaluation of shock hazard in installations with photovoltaic sources of energy is more complicated than in a conventional low voltage system. In case of earth fault in photovoltaic generators, that are connected to the AC power public grid, a composite waveform of earth fault current in the installation may occur. For composite waveforms, the safety criteria should be modified. The paper considers the effect of the composite waveforms...
-
Road safety inspection as a tool for road safety management – the polish experience
PublikacjaIn Poland, road inspections were implemented in June 2014 on all national roads. Previously conducted traffic surveys mainly related to the technical condition of roads, signs and markings; other safety issues were overlooked. The main problem that occurs during inspection is an inspector’s subjective qualitative assessment which affects the classification of the sources of hazard on the road.. The paper presents an analysis of...
-
Induced sheath voltages in 110 kV power cables – case study
PublikacjaThis paper considers electric shock hazard due to induced sheath voltages in 110 kV power cables. The purpose of this paper is to find an optimal configuration of the power cable system, taking into account electric shock hazard and ability of the system to transfer maximal power. A computer simulations on a computer model of the local power system, comprising high voltage power cables, were carried out. This model enables to analyse...
-
Analysis of bisphenols and their derivatives in infant and toddler ready-to-feed milk and powdered milk by LC MS/MS
PublikacjaReady-to-feed milk and powdered milk packed in different types of packaging lined with resin are chosen as the primary or complementary diet for infants and toddlers. An HPLC–MS/MS method was established and validated for the determination of nineteen bisphenols and their derivatives in such samples. The recoveries were from 31% to 120%, while the values of limit of detection and quantification were in the range of 0.24–0.40 and...
-
Conditions and capacity for implementing Poland’s vision zero
PublikacjaSince 1991 Poland has been systematically reducing its traffic hazard. Despite considerable progress Poland is still among the most dangerous countries in the European Union. The key types of actions that help to reduce fatalities include enhancement of pedestrian safety, reducing the number of speeding drivers and eliminating or reducing hazard on the road. The paper presents a brief diagnosis of the state of road safety in Poland...
-
Radionuclides activity and effective doses referred to geological formations
PublikacjaNaturally occurring radioactive materials (NORM) are present in Earth’s crust and they caused natural background radiation, variable in different regions. Liquid, gas and solid radionuclides emit three types of radiation – alpha, beta and gamma. Fluctuations of natural radioactivity in different geological formations in the world and in Poland were compared in relation to radiological hazard. Also drilling cuttings from boreholes...
-
Hazard assessment of sediments from a wetland system for treatment of landfill leachate using bioassays
PublikacjaFour bioassays were used in this study for the hazard assessment of sediments from sediment traps and several ponds in a treatment wetland for landfill leachate at Atleverket, Sweden. In the 6-day solid phase microbiotest with the sediment-dwelling crustacean Heterocypris incongruens both acute and chronic effects were observed with a gradual decrease and loss of toxicity with treatment in the wetland system. Some samples showed...
-
Potential Toxic Effects of Airport Runoff Water Samples on the Environment
PublikacjaDespite the positive aspects of the intensive development of aviation, airports are considered large-scale polluters. Pollution caused by runoff water (stormwater) is one of the major problems related to airport operations. The aim of this study was to characterize the potential toxic impact on aquatic life from runoff water discharges from four international airports in Europe. Samples of stormwater were collected at airports...
-
SafeCity – a GIS-based tool profiled for supporting decision making in urban development and infrastructure protection
PublikacjaThis paper presents a system for analysis of municipal Critical Infrastructures, which offers integrated tools for target analysis, hazard scenario simulations and spatial analysis within a remotely accessible Web-based Geographic Information System. The system has been applied to research conducted in the city of Gdansk with the aid of blast attack, chemical leakage and flood hazard scenarios, as well as a spatial density algorithm,...
-
Safety assurance strategies for autonomous vehicles
PublikacjaAssuring safety of autonomous vehicles requires that the vehicle control system can perceive the situation in the environment and react to actions of other entities. One approach to vehicle safety assurance is based on the assumption that hazardous sequences of events should be identified during hazard analysis and then some means of hazard avoidance and mitigation, like barriers, should be designed and implemented. Another approach...
-
Computer System for Evaluation of Shock Hazard in Circuits with Non-sinusoidal Earth Currents
PublikacjaEffects of current on people are mainly considered for 50/60 Hz sinusoidal current and smooth direct current. However, modern low voltage circuits are very often equipped with power electronics converters – rectifiers, frequency converters, therefore non-sinusoidal earth currents (touch currents) occur. For non-sinusoidal currents safety criteria should be modified. This paper presents a computer system, based on LabVIEW environment,...
-
Evaluation of fire hazard in electrical installations due to unfavorable ambient thermal conditions
PublikacjaEvaluation of fire hazard caused by electrical installations is a difficult and important topic, and it limits the possibility of loss of life or health of people, as well as the occurrence of significant property damage. In particular, this hazard was caused by power cables and especially photovoltaic (PV) installations. The authors proved that power cables directly exposed to strong solar radiation are likely to exceed maximum...
-
Studying road restraint systems to develop new guidelines
PublikacjaThe paper will present a proposed approach to such work along with preliminary results of numerical studies for selected problems using road safety devices such as safety barriers on horizontal curves, the effect of kerbs on bridges or the location of obstacles within the barrier’s working width. The paper will discuss assumptions to a methodology of numerical models, calculations and automated processing of data to help with assessing...
-
Evaluation of Health Hazard Due to Emission of Volatile Organic Compounds from Various Processing Units of Wastewater Treatment Plant
PublikacjaThe paper describes an attempt at health risk assessment and odour concentration determination in the most important units of a wastewater treatment plant. The cancer risk (CR) and hazard index (HI) parameters in selected measurement locations were calculated based on the results of chromatographic analyses (GCxGC-TOF-MS) and the United States Environmental Protection Agency (US EPA) guidelines. No exceedance of the CR and HI acceptable...
-
PLANNING AND ANALYSIS OF EARTHQUAKE DISASTER RELIEF WORK IN ETHIOPIA
PublikacjaThis paper addresses dynamic planning and analysis of earthquake disaster relief work by analysis the disaster throughout the technical and procedural method. And combine this analysis as continues assessment for better input to investigating planning disaster for discontinuous economic growth. This implemented, considering the vulnerability and hazard analysis as a procedural analysis disaster to estimating acceptance risk leveling...
-
Calculation of Induced Sheath Voltages in Power Cables – Single Circuit System versus Double Circuit System
PublikacjaThis paper presents comparison of values of induced sheath voltages in power cable metallic sheaths when one or two cables per phase are used. Calculation of voltages is performed for various phase sequences of the power cables. Three types of the sheaths bonding and earthing are considered. Shock hazard and voltage stress of non-metallic outer sheath of cables are evaluated. The proposed, optimal configuration of the power cable...
-
Do You Know What You Drink? Comparative Research on the Contents of Radioisotopes and Heavy Metals in Different Types of Tea from Various Parts of the World
PublikacjaThe aim of this study was to assess the potential health risks of radioactive elements and heavy metals ingested through the consumption of various types of tea imported to the Polish market (black, green, red, oolong and white). The concentrations [Bq/kg] of radionuclides (40K, 137Cs, 226Ra, 210Pb and 228Th) in tea leaves before and after brewing were measured using γ-ray spectrometry with high-purity germanium (HPGe). The concentrations...
-
Computer-aided Analysis of Induced Sheath Voltages in High Voltage Power Cable System
PublikacjaThis paper concerns the effect of configuration of high voltage power cables on induced voltages in their metallic sheaths. One, two or three cables per phase and phase sequence of the cables are considered. Computing of the voltages was performed for a normal operation and in case of earth fault. Various ways of the sheaths bonding are considered as well. Shock hazard and voltage stress of non-metallic outer sheath of cables are...
-
Geographic Information System for Flood Hazard Analysis and Early Warning Using Numerical Weather Predictions
PublikacjaFloods are a phenomenon which causes significant losses of lives as well as property damage, which in turn severely impact the local economy. The nature of a flooding has been well researched, and several methods of flood hazard simulation have been established over the last decades. The current legislation in the European Union requires the Member States to create, maintain and update flood risk and hazard maps, as well as identify...
-
A solvent selection guide based on chemometrics and multicriteria decision analysis
PublikacjaThe selection of suitable solvents is a crucially important subject in a wide range of chemical processes. This study presents a solvent selection guide where 151 solvents were assessed, including a significant number of recently reported bio-based solvents. The assessment procedure involves grouping of solvents according to their physicochemical parameters and ranking within clusters according to their toxicological and hazard...
-
System of protection against electric shock for circuits with power electronics converters
PublikacjaModern low voltage circuits are very often equipped with power electronics converters, therefore in these circuits non-sinusoidal earth currents (touch currents) may occur. For non-sinusoidal currents safety criteria should be modified. This paper presents these modified criteria and a computer system of protection against electric shock which can be implemented in circuits with power electronics converters. The system is based...
-
Modification of the operating point of residual current transformers for high frequency earth fault currents detection
PublikacjaFor protection against electric shock in low voltage systems residual current devices are commonly used. However, their proper operation can be interfered when earth fault current with high frequency components occurs. Serious hazard of electrocution exists then. One of the most important element of residual current devices is a residual current transformer with iron core. Tripping characteristic of residual current devices strictly...
-
The 12 principles of green analytical chemistry and the SIGNIFICANCE mnemonic of green analytical practices
PublikacjaThe current rapid development of green analytical chemistry (GAC) requires clear, concise guidelines in the form of GAC principles that will be helpful in greening laboratory practices. The existing principles of green chemistry and green engineering need revision for their use in GAC because they do not fully meet the needs of analytical chemistry. In this article we propose a set of 12 principles consisting of known concepts...
-
Influence of Operation Conditions on Temperature Hazard of Lithium-Iron-Phosphate (LiFePO4) Cells
PublikacjaThe article presents and discusses the results of research on hazard, especially temperature, for selected lithium-ion-phosphate cells operated in accordance with the manufacturer’s recommendations but used under onerous mining conditions. This applies to the performance of cells in battery sets without the application of any management system (BMS). On the basis of the obtained test results, first of all, the influence of the...
-
Improving sensitivity of residual current transformers to high frequency earth fault currents
PublikacjaFor protection against electric shock in low voltage systems residual current devices are commonly used. However, their proper operation can be interfered when high frequency earth fault current occurs. Serious hazard of electrocution exists then. In order to detect such a current, it is necessary to modify parameters of residual current devices, especially the operating point of their current transformer. The authors proposed...
-
Potential changes in an electric field and electrolytic corrosion.
PublikacjaSources have been described of corrosively hazardous electric fields and methods of determination of the corrosion hazard to metal structures caused by electrolytic corrosion. Results of potential and impedance investigations in the field of stray currents flowing out of a tram traction and in the presence of a defined electric field of low frequency have been presented. Uncertainties have been indicated relating to the generally...
-
Protection of bridges against stray current corrosion
PublikacjaA case study of Siennicki Bridge stray current corrosion hazard is presented. A corrosion risk was caused by incorrectly designed tram line traction which goes over the bridge. No dielectric insulation between running rails and bridge steel construction was used. A variety of protection methods against stray currents are described. Characteristics of the endangered bridge were described. Impressed current cathodic protection system...
-
The effect of Ag, Au, Pt, and Pd on the surface properties, photocatalytic activity and toxicity of multicomponent TiO2-based nanomaterials
PublikacjaMulticomponent TiO2-based nanomaterials (MC-NMs) show better physicochemical properties than their individual components or bulk materials. However, the same unique properties that offer innovative applications might also pose unknown risks to human health and the environment. In this context, TiO2- based nanomaterials with a mixture of noble metal precursors (Ag, Au, Pt, and Pd) for large-scale technological applications in air...
-
Flood risk assessment for office and services building Alchemia II at Al. Grunwaldzka 409 in Gdansk.
PublikacjaThe aim of the study is to assess the risk of flood from natural meteorological and hy-drological phenomena, for office and services building Alchemia II in Gdansk at Al. Grun-waldzka 409. The project includes the analysis of potential sources of floods in Gdansk re-garding the Baltic Sea and the Gulf of Gdansk, the Vistula River basin and excessive rainfall and snowmelt waters being a significant element of hydrological processes...
-
Knowledge-based functional safety management using ProSIL software
PublikacjaIn the article the ProSIL software for computer aided functional safety management is presented. The software consists of three modules for the determination of the required SIL level (ProSILen) and verification of the SIL level (ProSILver). In the ProSIL the calibrated knowledge-based risk graph method for determining the required safety integrity level (SIL) of the safety functions identified in hazard analysis is implemented....
-
INDICES FOR ASSESSING POTENTIAL ENVIRONMENTAL HAZARD FROM FUTURE SHIP SCRAPPING PROCESS, DETERMINABLE IN SHIP DESIGN STAGE
PublikacjaThis paper shortly presents the issue of utilization of ships after their withdrawal from service. Information on number of floating units liquidated in previous years was presented. Hazards to the environment , health and life of workers employed in the Far East ship scrapping yards operating on the beaches, were indicated. Then, the most important rules which have to make the ship recycling process safe were referred to. This...
-
Determining required safety integrity level
PublikacjaOne of the most important stage of technical system functional safety analysis is defining the safety-related functions as well as determining safety integrity level (SIL) for each defined function. A properly carried out hazard identyfication process is the necessary condition for correct definition of the safety-related functions. Determining the safety integrity level (SIL) is based on risk assessment taking into account risk...
-
Why are trees still such a major hazard to drivers in Poland?
PublikacjaRoadside trees are one of Poland's most serious road safety issues. Since 2009 more than 2800 people have been killed as a result of tree collisions; this represents about 15% of all of Poland's accident fatalities between 2009 and 2013. In some of the country's regions striking a tree caused more than 30% of all road accident fatalities. With no proper regulations, guidelines or examples of good practice, roadside environments...
-
Assessing and Mitigating Ice-Jam Flood Hazards and Risks: A European Perspective
PublikacjaThe assessment and mapping of riverine flood hazards and risks is recognized by many countries as an important tool for characterizing floods and developing flood management plans. Often, however, these management plans give attention primarily to open-water floods, with ice-jam floods being mostly an afterthought once these plans have been drafted. In some Nordic regions, ice-jam floods can be more severe than open-water floods,...
-
Development of tools for road infrastructure safety management for the provinces (voivodeships) in Poland
PublikacjaThe development of modern tools for road infrastructure safety management will help to reduce the number of fatalities and serious injuries as one of the main objectives adopted in 2013 in the National Road Safety Programme 2014-2020 and the new Road Safety Programme 2011-2020 in the EU. Risk Management in Highway Engineering can be applied in developing tools essential in the process of safety management. Risk Management in Highway...
-
Current trends in analytical strategies for determination of polybrominated diphenyl ethers (PBDEs) in samples with different matrix compositions – Part 1.: Screening of new developments in sample preparation
PublikacjaPolybrominated diphenyl ethers (PBDEs) are ubiquitous compounds in the environment. Restrictions on the use of PBDEs introduced at the beginning of the 21st century have not eliminated these highly persistent and bioaccumulative compounds from the environment. Despite many existing regulations to control and phase out, extensive research on PBDEs is still necessary to fully evaluate the hazard their create to the environment. In...
-
Procedure based functional safety and information security management of industrial automation and control systems on example of the oil port installations
PublikacjaThe approach addresses selected technical and organization aspects of risk mitigation in the oil port installations with regard to functional safety and security requirements specified in standards IEC 61508, IEC 61511 and IEC 62443. The procedure for functional safety management includes the hazard identification, risk analysis and assessment, specification of overall safety requirements and definition of...