Study of oxygen electrode reactions on symmetrical porous SrTi0.30Fe0.70O3-δ electrodes on Ce0.8Gd0.2O1.9 electrolyte at 800 °C–500 °C
Abstract
Iron doped strontium titanates (SrTi1-xFexO3-δ) are an interesting mixed ionic-electronic conductor model used to study basic oxygen reduction/oxidation reactions. In this work, we performed an impedance spectroscopy study on symmetrical porous SrTi0.30Fe0.70O3-δ (STF70) electrodes on a ceriabased electrolyte. The sample was measured in varying oxygen concentration: from 0.3% to 100% in 800 °C - 500 °C temperature range. Low polarisation resistance (e.g. <125 mΩ cm2 at 600 °C in the air) values were obtained, showing an overall high performance of the STF70 electrode. Impedance data analysis was assisted by the distribution of relaxation times method, which allowed an equivalent electrical circuit to be proposed comprising of two resistance/constant phase element sub-circuits connected in series. The medium frequency contribution, with a characteristic frequency of ~2000 Hz at 800 °C in air, originates most probably from possible surface diffusion followed by charge transfer reaction limitation, whereas the lower frequency contribution (characteristic frequency <10 Hz) is due to gas-phase diffusion.
Citations
-
8
CrossRef
-
0
Web of Science
-
1 2
Scopus
Authors (3)
Cite as
Full text
- Publication version
- Accepted or Published Version
- License
- open in new tab
Keywords
Details
- Category:
- Articles
- Type:
- artykuły w czasopismach
- Published in:
-
ELECTROCHIMICA ACTA
no. 346,
ISSN: 0013-4686 - Language:
- English
- Publication year:
- 2020
- Bibliographic description:
- Mroziński A., Molin S., Jasiński P.: Study of oxygen electrode reactions on symmetrical porous SrTi0.30Fe0.70O3-δ electrodes on Ce0.8Gd0.2O1.9 electrolyte at 800 °C–500 °C// ELECTROCHIMICA ACTA -Vol. 346, (2020), s.136285-
- DOI:
- Digital Object Identifier (open in new tab) 10.1016/j.electacta.2020.136285
- Bibliography: test
-
- P. Caliandro, A. Nakajo, S. Diethelm, J. Van herle, Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements, J. Power Sources 436 (2019) 226838, https:// doi.org/10.1016/j.jpowsour.2019.226838. open in new tab
- A.J. Samson, M. Søgaard, P.V. Hendriksen, Model for solid oxide fuel cell cathodes prepared by infiltration, Electrochim. Acta 229 (2017) 73e95, https://doi.org/10.1016/j.electacta.2017.01.088. open in new tab
- C. Lenser, N.H. Menzler, Impedance characterization of supported oxygen ion conducting electrolytes, Solid State Ionics 334 (2019) 70e81, https://doi.org/ 10.1016/j.ssi.2019.01.031. open in new tab
- D. Sandil, S. Kumar, K. Arora, S. Srivastava, B.D. Malhotra, S.C. Sharma, N.K. Puri, Biofunctionalized nanostructured tungsten trioxide based sensor for cardiac biomarker detection, Mater. Lett. 186 (2017) 202e205, https://doi.org/ 10.1016/j.matlet.2016.09.107. open in new tab
- S. Singal, A.K. Srivastava, Rajesh, Electrochemical impedance analysis of bio- functionalized conducting polymer-modified graphene-CNTs nanocomposite for protein detection, Nano-Micro Lett. 9 (2017) 1e9, https://doi.org/10.1007/ s40820-016-0108-2. open in new tab
- C. Wei, X. Zou, Q. Liu, S. Li, C. Kang, W. Xiang, A highly sensitive non-enzymatic glucose sensor based on CuS nanosheets modified Cu2O/CuO nanowire arrays, Electrochim. Acta 334 (2020) 135630, https://doi.org/10.1016/ j.electacta.2020.135630. open in new tab
- J.L. Song, X. Guo, SrTi 0.65 Fe 0.35 O 3 nanofibers for oxygen sensing, Solid State Ionics 278 (2015) 26e31, https://doi.org/10.1016/j.ssi.2015.05.009. open in new tab
- L. Folkertsma, L. Gehrenkemper, J. Eijkel, K. Gerritsen, M. Odijk, Reference- electrode free pH sensing using impedance spectroscopy, Proceedings 2 (2018) 742, https://doi.org/10.3390/proceedings2130742. open in new tab
- L. Manjakkal, E. Djurdjic, K. Cvejin, J. Kulawik, K. Zaraska, D. Szwagierczak, Electrochemical impedance spectroscopic analysis of RuO 2 based thick film pH sensors, Electrochim. Acta 168 (2015) 246e255, https://doi.org/10.1016/ j.electacta.2015.04.048. open in new tab
- K. Cysewska, L.F. Macía, P. Jasi nski, A. Hubin, In-situ odd random phase electrochemical impedance spectroscopy study on the electropolymerization of pyrrole on iron in the presence of sodium salicylate e the influence of the monomer concentration, Electrochim. Acta 290 (2018) 520e532, https:// doi.org/10.1016/j.electacta.2018.09.069. open in new tab
- K. Cysewska, M. Gazda, P. Jasi nski, Influence of electropolymerization tem- perature on corrosion, morphological and electrical properties of PPy doped with salicylate on iron, Surf. Coating. Technol. 328 (2017) 248e255, https:// doi.org/10.1016/j.surfcoat.2017.08.055. open in new tab
- E. Ivers-Tiff ee, A. Weber, Evaluation of electrochemical impedance spectra by the distribution of relaxation times, J. Ceram. Soc. Japan. 125 (2017) 193e201, https://doi.org/10.2109/jcersj2.125.P4-1. open in new tab
- B.A. Boukamp, A. Rolle, Use of a distribution function of relaxation times (DFRT) in impedance analysis of SOFC electrodes, Solid State Ionics 314 (2018) 103e111, https://doi.org/10.1016/j.ssi.2017.11.021. open in new tab
- D. Papurello, D. Menichini, A. Lanzini, Distributed relaxation times technique for the determination of fuel cell losses with an equivalent circuit model to identify physicochemical processes, Electrochim. Acta 258 (2017) 98e109, https://doi.org/10.1016/j.electacta.2017.10.052. open in new tab
- D.A. Osinkin, Complementary effect of ceria on the hydrogen oxidation ki- netics on Ni -Ce 0.8 Sm 0.2 O 2-d anode, Electrochim. Acta 330 (2020) 135257, https://doi.org/10.1016/j.electacta.2019.135257. open in new tab
- J. Liu, F. Ciucci, The Gaussian process distribution of relaxation times: a ma- chine learning tool for the analysis and prediction of electrochemical impedance spectroscopy data, Electrochim. Acta 331 (2020) 135316, https:// doi.org/10.1016/j.electacta.2019.135316. open in new tab
- X. Li, M. Ahmadi, L. Collins, S.V. Kalinin, Deconvolving distribution of relaxa- tion times, resistances and inductance from electrochemical impedance spectroscopy via statistical model selection: exploiting structural-sparsity regularization and data-driven parameter tuning, Electrochim. Acta 313 (2019) 570e583, https://doi.org/10.1016/j.electacta.2019.05.010. open in new tab
- H. Sumi, H. Shimada, Y. Yamaguchi, T. Yamaguchi, Y. Fujishiro, Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells, Electrochim, Acta 339 (2020) 135913, https://doi.org/10.1016/ j.electacta.2020.135913. open in new tab
- F. Ciucci, C. Chen, Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: a bayesian and hierarchical bayesian approach, Electrochim. Acta 167 (2015) 439e454, https://doi.org/ 10.1016/j.electacta.2015.03.123. open in new tab
- M. Saccoccio, T.H. Wan, C. Chen, F. Ciucci, Optimal regularization in distri- bution of relaxation times applied to electrochemical impedance spectros- copy: ridge and Lasso regression methods -a theoretical and experimental Study, Electrochim. Acta 147 (2014) 470e482, https://doi.org/10.1016/ j.electacta.2014.09.058. open in new tab
- T.H. Wan, M. Saccoccio, C. Chen, F. Ciucci, Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools, Electrochim. Acta 184 (2015) 483e499, https://doi.org/10.1016/j.electacta.2015.09.097. open in new tab
- E. Quattrocchi, T.H. Wan, A. Curcio, S. Pepe, M.B. Effat, F. Ciucci, A general model for the impedance of batteries and supercapacitors: the non-linear distribution of diffusion times, Electrochim. Acta 324 (2019) 134853, https://doi.org/10.1016/j.electacta.2019.134853. open in new tab
- F. Ciucci, Modeling electrochemical impedance spectroscopy, Curr. Opin. Electrochem. 13 (2019) 132e139, https://doi.org/10.1016/ j.coelec.2018.12.003. open in new tab
- A.P. Tarutin, G.K. Vdovin, D.A. Medvedev, A.A. Yaremchenko, Fluorine-con- taining oxygen electrodes of the nickelate family for proton-conducting electrochemical cells, Electrochim. Acta 337 (2020) 135808, https://doi.org/ 10.1016/j.electacta.2020.135808. open in new tab
- S. Wang, H. Jiang, Y. Gu, B. Yin, S. Chen, M. Shen, Y. Zheng, L. Ge, H. Chen, L. Guo, Mo-doped La 0$6 Sr 0$4 Fe O3-d as an efficient fuel electrode for direct electrolysis of CO 2 in solid oxide electrolysis cells, Electrochim. Acta 337 (2020) 135794, https://doi.org/10.1016/j.electacta.2020.135794. open in new tab
- N. Ortiz-Vitoriano, A. Hauch, I. Ruiz de Larramendi, C. Bernuy-L opez, R. Knibbe, T. Rojo, Electrochemical characterization of La 0.6 Ca 0.4 Fe 0.8 Ni 0.2 O 3Àd perovskite cathode for IT-SOFC, J. Power Sources 239 (2013) 196e200, https:// doi.org/10.1016/j.jpowsour.2013.03.121. open in new tab
- A. Chrzan, S. Ovtar, P. Jasinski, M. Chen, A. Hauch, High performance LaNi 1- x Co x O 3-d (x ¼ 0.4 to 0.7) infiltrated oxygen electrodes for reversible solid oxide cells, J. Power Sources 353 (2017) 67e76, https://doi.org/10.1016/ j.jpowsour.2017.03.148. open in new tab
- X. Tong, S. Ovtar, K. Brodersen, P.V. Hendriksen, M. Chen, Large-area solid oxide cells with La 0.6 Sr 0.4 CoO 3-d infiltrated oxygen electrodes for electricity generation and hydrogen production, J. Power Sources 451 (2020) 227742, https://doi.org/10.1016/j.jpowsour.2020.227742. open in new tab
- J. Schneider, T. Tichter, P. Khadke, R. Zeis, C. Roth, Deconvolution of electro- chemical impedance data for the monitoring of electrode degradation in VRFB, Electrochim. Acta 336 (2019) 135510, https://doi.org/10.1016/ j.electacta.2019.135510. open in new tab
- H. Qu, J. Kafle, J. Harris, D. Zheng, J. Koshina, D. Boone, A.M. Drake, C.J. Abegglen, D. Qu, Application of ac impedance as diagnostic tool e low temperature electrolyte for a Li-ion battery, Electrochim. Acta 322 (2019), https://doi.org/10.1016/j.electacta.2019.134755. open in new tab
- S. Sun, Z. Cheng, Electrochemical behaviors for Ag, LSCF and BSCF as oxygen electrodes for proton conducting IT-SOFC, J. Electrochem. Soc. 164 (2017) F3104eF3113, https://doi.org/10.1149/2.0121710jes. open in new tab
- Y. Li, R. Gemmen, X. Liu, Oxygen reduction and transportation mechanisms in solid oxide fuel cell cathodes, J. Power Sources 195 (2010) 3345e3358, https://doi.org/10.1016/j.jpowsour.2009.12.062. open in new tab
- Y. Takeda, Cathodic polarization phenomena of perovskite oxide electrodes with stabilized zirconia, J. Electrochem. Soc. 134 (1987) 2656, https://doi.org/ 10.1149/1.2100267. open in new tab
- P. Hjalmarsson, M. Søgaard, M. Mogensen, Electrochemical performance and degradation of (La 0.6 Sr 0.4 ) 0.99 CoO 3-d as porous SOFC-cathode, Solid State Ionics 179 (2008) 1422e1426, https://doi.org/10.1016/j.ssi.2007.11.010. open in new tab
- L. Navarrete, C. Solís, J.M. Serra, Boosting the oxygen reduction reaction mechanisms in IT-SOFC cathodes by catalytic functionalization, J. Mater. Chem. A. 3 (2015) 16440e16444, https://doi.org/10.1039/c5ta05187h. open in new tab
- R. Merkle, J. Maier, How is oxygen incorporated into oxides? A comprehensive kinetic study of a simple solid-state reaction with SrTiO3 as a model material, Angew. Chem. Int. Ed. 47 (2008) 3874e3894, https://doi.org/10.1002/ anie.200700987. open in new tab
- J. Fleig, R. Merkle, J. Maier, The p(O2) dependence of oxygen surface coverage and exchange current density of mixed conducting oxide electrodes: model considerations, Phys. Chem. Chem. Phys. 9 (2007) 2713e2723, https://doi.org/ 10.1039/b618765j. open in new tab
- W. Jung, H.L. Tuller, Investigation of cathode behavior of model thin-film SrTi 1 -x Fe x O 3 -d (x ¼ 0.35 and 0.5) mixed ionic-electronic conducting electrodes, J. Electrochem. Soc. 155 (2008) B1194eB1201, https://doi.org/10.1149/ 1.2976212. open in new tab
- N.H. Perry, G.F. Harrington, H.L. Tuller, Electrochemical Ionic Interfaces, Elsevier Inc., 2018, pp. 79e106, https://doi.org/10.1016/B978-0-12-811166- 6.00004-2. open in new tab
- T. Miruszewski, K. Dzierzgowski, P. Winiarz, S. Wachowski, A. Mielewczyk- Gry n, M. Gazda, Structural properties and water uptake of STi 1-x Fe x O 3-x/2-d , Materials 13 (2020) 965, https://doi.org/10.3390/ma13040965. open in new tab
- S.J. Litzelman, A. Rothschild, H.L. Tuller, The electrical properties and stability of SrTi 0.65 Fe 0.35 O 3Àd thin films for automotive oxygen sensor applications, Sensor. Actuator. B Chem. 108 (2005) 231e237, https://doi.org/10.1016/ j.snb.2004.10.040. open in new tab
- A. Rothschild, W. Menesklou, H.L. Tuller, E. Ivers-Tiff ee, Electronic structure, defect chemistry, and transport properties of SrTi 1-x Fe x O 3-y solid solutions, Chem. Mater. 18 (2006) 3651e3659, https://doi.org/10.1021/cm052803x. open in new tab
- P.J. Gellings, H.J.M. Bouwmeester, Ion and mixed conducting oxides as cata- lysts, Catal. Today 12 (1992) 1e101, https://doi.org/10.1016/0920-5861(92) 80046-P. open in new tab
- P.J. Gellings, H.J.M. Bouwmeester, Solid state aspects of oxidation catalysis, Catal. Today 58 (2000) 1e53, https://doi.org/10.1016/S0920-5861(00)00240- 6. open in new tab
- S. Molin, W. Lewandowska-Iwaniak, B. Kusz, M. Gazda, P. Jasinski, Structural and electrical properties of Sr(Ti, Fe)O 3-d materials for SOFC cathodes, J. Elec- troceram. 28 (2012) 80e87, https://doi.org/10.1007/s10832-012-9683-x. open in new tab
- A. Mrozi nski, S. Molin, J. Karczewski, T. Miruszewski, P. Jasi nski, Electro- chemical properties of porous Sr 0.86 Ti 0.65 Fe 0.35 O 3 oxygen electrodes in solid oxide cells: impedance study of symmetrical electrodes, Int. J. Hydrogen En- ergy 44 (2019) 1827e1838, https://doi.org/10.1016/j.ijhydene.2018.11.203. open in new tab
- R. Moos, W. Menesklou, H.J. Schreiner, K.H. H€ ardtl, Materials for temperature independent resistive oxygen sensors for combustion exhaust gas control, Sensor. Actuator. B Chem. 67 (2000) 178e183, https://doi.org/10.1016/S0925- 4005(00)00421-4. open in new tab
- H.Y. Li, H. Yang, X. Guo, Oxygen sensors based on SrTi 0.65 Fe 0.35 O 3-d thick film with MgO diffusion barrier for automotive emission control, Sensor. Actuator. B Chem. 213 (2015) 102e110, https://doi.org/10.1016/j.snb.2015.02.079. open in new tab
- A. Mrozi nski, S. Molin, P. Jasi nski, Effect of sintering temperature on electro- chemical performance of porous SrTi 1-x Fe x O 3-d (x¼ 0.35, 0.5, 0.7) oxygen electrodes for solid oxide cells, J. Solid State Electrochem. (2020), https:// doi.org/10.1007/s10008-020-04534-0. open in new tab
- A. Mrozi nski, S. Molin, J. Karczewski, B. Kamecki, P. Jasi nski, The influence of iron doping on performance of SrTi 1-x Fe x O 3-d perovskite oxygen electrode for SOFC, ECS Trans 91 (2019) 1299e1307, https://doi.org/10.1149/ 09101.1299ecst. open in new tab
- F. Tietz, Thermal expansion of SOFC materials, Ionics 5 (1999) 129e139, https://doi.org/10.1007/BF02375916. open in new tab
- A. Løken, S. Ricote, S. Wachowski, Thermal and chemical expansion in proton ceramic electrolytes and compatible electrodes, Crystals 8 (2018) 365, https:// doi.org/10.3390/cryst8090365. open in new tab
- M. Mogensen, N.M. Sammes, G.A. Tompsett, Physical, chemical and electro- chemical properties of pure and doped ceria, Solid State Ionics 129 (2000) 63e94, https://doi.org/10.1016/S0167-2738(99)00318-5. open in new tab
- W. Jung, H.L. Tuller, Impedance study of SrTi 1-x Fe x O 3-d (x ¼ 0.05 to 0.80) mixed ionic-electronic conducting model cathode, Solid State Ionics 180 (2009) 843e847, https://doi.org/10.1016/j.ssi.2009.02.008. open in new tab
- M. Heinzmann, A. Weber, E. Ivers-Tiff ee, Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times, J. Power Sources 402 (2018) 24e33, https://doi.org/10.1016/ j.jpowsour.2018.09.004. open in new tab
- B.A. Boukamp, Electrochemical impedance spectroscopy in solid state ionics: recent advances, Solid State Ionics 169 (2004) 65e73, https://doi.org/10.1016/ j.ssi.2003.07.002. open in new tab
- C. Chatzichristodoulou, P.T. Blennow, M. Søgaard, P. V Hendriksen, M.B. Mogensen, Ceria and its use in solid oxide cells and oxygen membranes. Catal. By Ceria Relat. Mater., second ed., 2013, pp. 623e782, https://doi.org/ 10.1142/9781848169647_0012. open in new tab
- M.J. Escudero, A. Aguadero, J.A. Alonso, L. Daza, A kinetic study of oxygen reduction reaction on La 2 NiO 4 cathodes by means of impedance spectroscopy, J. Electroanal. Chem. 611 (2007) 107e116, https://doi.org/10.1016/ j.jelechem.2007.08.006. open in new tab
- K. Masuda, A. Kaimai, K. Kawamura, Y. Nigara, T. Kawada, J. Mizusaki, H. Yugami, H. Arashi, Electrochemical reaction kinetics of mixed conducting electrodes on CeO 2 -based solid electrolytes, in: Proc. Electrochem. Soc., 1997, pp. 473e482.
- B.C.H. Steele, Survey of materials selection for ceramic fuel cells, Solid State Ionics 88 (1996) 1223e1234, https://doi.org/10.1016/0167-2738(96)00291-3. open in new tab
- S.L. Zhang, H. Wang, M.Y. Lu, A.P. Zhang, L.V. Mogni, Q. Liu, C.X. Li, C.J. Li, S.A. Barnett, Cobalt-substituted SrTi 0.3 Fe 0.7 O 3-d : a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electro- chemical cells, Energy Environ. Sci. 11 (2018) 1870e1970, https://doi.org/ 10.1039/C8EE00449H. open in new tab
- Sources of funding:
- Verified by:
- Gdańsk University of Technology
Referenced datasets
- dataset Oxygen partial pressure and temperature dependence of R-CPE1 resistance of symmetrical porous SrTi0.30Fe0.70O3 electrode on CGO substrate
- dataset Oxygen partial pressure and temperature dependence of R-CPE2 frequency of symmetrical porous SrTi0.30Fe0.70O3 electrode on CGO substrate
- dataset Electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for porous SrTi0.30Fe0.70O3-d oxygen electrode measured at 800 °C and 15% oxygen partial pressure
- dataset Electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for porous SrTi0.30Fe0.70O3-d oxygen electrode measured at 700 °C and 100% oxygen partial pressure
- dataset Selection of the lambda parameter for DRT analysis of SrTi0.30Fe0.70O3-d oxygen electrode at 800 °C and 1% oxygen partial pressure
- dataset Oxygen partial pressure and temperature dependence of R-CPE1 capacity of symmetrical porous SrTi0.30Fe0.70O3 electrode on CGO substrate
- dataset Oxygen partial pressure and temperature dependence of R-CPE1 frequency of symmetrical porous SrTi0.30Fe0.70O3 electrode on CGO substrate
- dataset Electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for porous SrTi0.30Fe0.70O3-d oxygen electrode measured at 700 °C and 20% oxygen partial pressure
- dataset Oxygen partial pressure and temperature dependence of R-CPE2 resistance of symmetrical porous SrTi0.30Fe0.70O3 electrode on CGO substrate
- dataset Electrochemical impedance spectroscopy and Distribution of Relaxation Times analysis results for porous SrTi0.30Fe0.70O3-d oxygen electrode measured at 700 °C and 5% oxygen partial pressure
seen 114 times