dr hab. inż. Beata Bochentyn
Employment
- Head of Section at Faculty of Applied Physics and Mathematics
- Associate professor at Instytut Nanotechnologii i Inżynierii Materiałowej
Publications
Filters
total: 84
Catalog Publications
Year 2013
-
YSZ Thin film deposited on porous substrate by spray pyrolysis
PublicationIn this work the results of deposition of YSZ layer on a porous substrate using an ultrasonic Spray Pyrolysis are presented.
-
Właściwości strukturalne i transportowe kompozytów tytanianu strontu z tlenkami przewodzącymi jonowo
PublicationW ramach pracy doktorskiej wytworzono i zbadano właściwości kompozytów tytanianu strontu domieszkowanego niobem (Sr(Ti,Nb)O3) z wybranymi tlenkami przewodzącymi jonowo (tlenek cyrkonu stabilizowany tlenkiem itru – YSZ, tlenek ceru - CeO2). Analizę dla różnych składów kompozytów prowadzono w szerokim zakresie temperatur i ciśnień parcjalnych tlenu. Właściwości strukturalne kompozytów zbadano metodami XRD, SEM, AFM i EDX, zaś właściwości...
Year 2019
-
Wytwarzanie i badanie związków domieszkowanego tlenku ceru jako anodowych materiałów katalitycznych do tlenowych ogniw paliwowych zasilanych biogazem
PublicationW ramach pracy wytworzono tlenki ceru domieszkowane Pr, Y, La, Nd i Sm w stosunku 9:1 metodą strącania z odwróconej mikroemulsji. Wytworzone nanokrystaliczne proszki poddano analizie XRD, co dowiodło ich jednofazowości. Następnie, otrzymane tlenki nałożono w formie warstw katalitycznych na anody ogniw paliwowych. Korzystając z mikroskopii SEM, przeprowadzono obserwację powierzchni warstw z domieszką Pr, La, Nd i Sm po wygrzewaniu....
-
WPŁYW METODY SYNTEZY NA WŁAŚCIWOŚCI STRUKTURALNE I KATALITYCZNE ZWIĄZKU Ce0.9Pr0.1O2-δ PODCZAS WYSOKOTEMPERATUROWEJ PRACY W BIOGAZIE
PublicationTlenkowe ogniwa paliwowe zasilane biogazem degradują się pod wpływem węgla osadzającego się na anodzie. Aby wyeliminować ten efekt, szuka się warstw katalitycznych, które nałożone na anodę powstrzymują osadzanie się węgla i zmniejszają straty wydajności ogniwa. Związkiem użytym w tym celu jest Ce0,9Pr0,1O2-δ wytworzony dwiema metodami: Pechiniego i metodą strącania z odwróconej emulsji. Aby zbadać wpływ metody syntezy na właściwości...
Year 2018
-
Wykorzystanie fourierowskiej spektroskopii w podczerwieni do badania stężenia gazów wylotowych z tlenkowego ogniwa paliwowego zasilanego biogazem
PublicationW dzisiejszych czasach bardzo ważne jest pozyskiwanie energii ze źródeł odnawialnych i bezpiecznych dla środowiska. Jedną z obiecujących technologii są tlenkowe ogniwa paliwowe (ang. Solid Oxide Fuel Cell, SOFC). Stanowią one bezpieczną i ekologiczną alternatywę dla energii uzyskanej z paliw kopalnych. SOFC charakteryzuje się sprawnością energetyczną na poziomie 45-60 %, podczas gdy sprawność klasycznych elektrowni cieplnych nie...
-
The influence of synthesis method on the microstructure and catalytic performance of Y 0.07 Sr 0.93 Ti 0.8 Fe 0.2 O 3-δ in synthetic biogas operated solid oxide fuel cells
PublicationThe Y0.07Sr0.93Ti0.8Fe0.2O3-δ (YSTF) material was fabricated using three different synthesis methods: modified polymer precursor method (MPP), Pechini method and a solid state reaction method. It was applied as an anode catalytic material for biogas reforming in solid oxide fuel cells. Clear differences in the microstructure of fabricated catalytic layers were found, mainly with respect to a grain size and distribution of grains....
-
Synteza i badanie właściwości materiałów termoelektrycznych typu AgSbTe2-xSex
PublicationMateriały termoelektryczne, takie jak domieszkowane chalkogenki AgSbTe2, są przedmiotem dużego zainteresowania w poszukiwaniach nowych rozwiązań energetycznych. Celem badań była synteza materiałów termoelektrycznych o stechiometrii AgSbTe2-xSex metodą redukcji tlenków i określenie ich morfologii oraz niektórych parametrów termoelektrycznych. Otrzymane próbki cechowały niejednorodność i wielofazowość. Materiały wykazywały przewodność...
-
Structure and thermoelectric properties of bismuth telluride—Carbon composites
PublicationCarbon nanotubes and amorphous carbon have been introduced into a bismuth telluride matrix (0.15 and 0.30 wt.% ratio) to investigate the influence of the carbon on the composite’s thermoelectric properties. Composites with well-dispersed additives have been obtained by sonication and ball-milling methodology. Carbon nanotubes and an amorphous carbon addition led to a decrease in electric conductivity from 1120 S/cm to 77 S/cm....
Year 2015
-
Wpływ procesu redukcji na właściwości strukturalne i mechaniczne szkieł tlenkowych z grupy (Pb,Bi)-(Si,Ge)-O = Influence of reduction process on the structural and mechanical properties of (Pb,Bi)-(Si,Ge)-O oxide glasses
PublicationThe effect of the reduction process in H2 at 380 °C on the microstructure and elemental composition of a glass Bi0.4Pb0.2Si0.4Ox has been investigated. It has been shown that after reduction a clearly separated top layer with a thickness of approx. 50 µm was formed on the surface of the sample. This layer is depleted of oxygen and has higher electrical conductivity than the interior of the glass. It has also been found that some...
-
Wpływ procesu redukcji na właściwości strukturalne i mechaniczne szkieł tlenkowych z grupy (Pb,Bi)-(Si,Ge)-O
PublicationW pracy zbadano wpływ procesu redukcji w wodorze prowadzonej w temperaturze 380°C na mikrostrukturę i skład pierwiastkowy próbki szkła Bi0.4Pb0.2Si0.4Ox. Wykazano, że na skutek redukcji w próbce tworzy się wyraźnie odseparowana wierzchnia warstwa o grubości ok. 50µm, która jest zubożona w tlen i charakteryzuje się lepszą przewodnością elektryczną. Stwierdzono również, że na powierzchni szkła tworzą się granule metalicznego bizmutu...
-
Właściwości redukowanych szkieł Ge-Sb-O dla urządzeń termoelektrycznych
PublicationPraca zawiera wyniki badań strukturalnych oraz właściwości termoelektrycznych tlenkowego szkła antymonowo-germanianowego, poddanego redukcji w atmosferze wodoru, jako potencjalnego materiału do zastosowań w urządzeniach termoelektrycznych. Otrzymane rezultaty analizy dyfrakcyjnej oraz analizy mikroskopowej dały informacje o strukturze i składzie próbki. Potwierdziły one fakt powstawania warstwy powierzchniowej zredukowanych granul...
-
Structure and thermoelectric properties of Bi–Te alloys obtained by novel method of oxide substrates reduction
PublicationA novel method of thermoelectric materials fabrication has been developed. Oxide reagents have been melted at high temperature in air, quenched, milled to powder and reduced in hydrogen to form Bi–Te alloys. Structural and thermoelectric properties of samples have been investigated depending on initial composition and temperature of reduction process. Sample 25Bi2O3–75TeO2 reduced at 340 °C for 10 h has been found to be a p-type...
-
Planowanie eksperymentu
PublicationW pracy przedstawiono schemat postępowania przy planowaniu eksperymentu naukowego
-
Ogniwa paliwowe jako stacjonarne źródła mocy w gospodarstwach domowych i budynkach użyteczności publicznej
PublicationPrzedmiotem niniejszego opracowania są tlenkowe ogniwa paliwowe, które mogą znaleźć powszechne zastosowanie w krajowym sektorze energetycznym jako ciche, wydajne i przyjazne środowisku urządzenia do konwersji energii.
-
Materiały termoelektryczne – obecny stan wiedzy oraz nowe perspektywy
PublicationW niniejszej pracy opisano podstawowe parametry determinujące przydatność danego materiału do zastosowań w urządzeniach termoelektrycznych. Opisano założenia teoretyczne, jakie powinien spełniać potencjalnie dobry materiał termoelektryczny oraz zaprezentowano materiały współcześnie charakteryzujące się najlepszym parametrem dobroci. Nakreślono również ideę nowego sposobu otrzymywania materiałów termoelektrycznych z częściowo lub...
Year 2014
-
Właściwości strukturalne i elektryczne szkieł tlenkowych z grupy Pb-P-O
PublicationPrzeprowadzono wytop szkieł ołowiowo-fosforanowych xPbO-(100-x)P2O5 (gdzie x=10,20,30,40,50,60). Stwierdzono, że na skutek parowania następuje zubożenie szkieł w ołów względem początkowej stechiometrii. Zbadano właściwości strukturalne oraz przeanalizowano doniesienia literaturowe w zakresie właściwości elektrycznych tych szkieł. Zaobserwowano, że w zależności od udziału tlenku ołowiu w strukturze szkła następuję wyraźna zmiana...
-
Wiedza ogólna o eksperymencie naukowym
PublicationW pracy przedstawiono podstawowe pojęcia z zakresu metodologii badań w nauce i w technice
-
The properties of reduced Ge-Sb-O glasses for thermoelectric devices
PublicationThe structural and electrical properties of germanium-antimonate glasses after heat treatment in hydrogen have been determined. In the case of 50GeO2-50Sb2O3 glass reduced at 340°C even for less than 1 hour a continuous layer of antimony granules is formed and its electrical properties determine the surface conductivity of the reduced sample. The bulk electrical conductivity at 100°C of this sample was determined as 1000 Scm-1...
-
The properties of reduced Bi-Ge-O glasses for thermoelectric devices
PublicationThe bismuth-germanate glasses have been investigated to examine their applicability for thermoelectric devices. In order to increase their electrical conductivity, the 25Bi2O3–75GeO2 glass samples have been reduced at 340-380°C for 10 hours in hydrogen. It has been shown that such heat treatment in H2 leads to the reduction of metal ions Bi3+ and Ge4+ into neutral atoms and the formation of metal grains both in an amorphous glass...
-
Metodyka wytwarzania tlenkowych ogniw paliwowych oraz pomiaru ich parametrów elektrycznych w warunkach laboratoryjnych
PublicationCelem opracowania jest zaprezentowanie metodyki przygotowania oraz pomiaru parametrów elektrycznych tlenkowych ogniw paliwowych z anodą kompozytową na bazie perowskitu. Częściowo procedura ta była opisana w rozprawie doktorskiej autorki pt. „Właściwości strukturalne i transportowe kompozytów tytanianu strontu z tlenkami przewodzącymi jonowo” (Gdańsk 2013).
-
Metodyka wykonywania pomiarów oraz ocena niepewności i błędów pomiaru
Publicationelem każdego ćwiczenia w laboratorium studenckim jest zmierzenie pewnych wielkości, a następnie ob- liczenie na podstawie tych wyników pomiarów wartości wielkości badanej. Rezulta- tem końcowym badań jest nie tylko otrzymany wynik liczbowy. Nie mniej ważne jest dokonanie oceny dokład- ności pomiaru oraz opraco- wanie wniosków końcowych. Warto zadać sobie pytanie: czy to, co zostało zmierzone, ma sens i co z tego wynika?...
-
Katalizatory reakcji elektrochemicznych w tlenkowych ogniwach paliwowych zasilanych biogazem
PublicationJednym z potencjalnych obszarów zastosowań tlenkowych ogniw paliwowych jest energetyka rozproszona, gdzie paliwem mógłby biogaz pochodzący z oczyszczalni ścieków, wysypisk, gospodarstw rolnych. Obecnie stosowane na skalę komercyjną rozwiązania technologiczne uniemożliwiają wykorzystanie paliwa w postaci biogazu m.in. ze względu na niską odporność anody na osadzanie węgla oraz niewystarczającą aktywność katalityczną dla elektrochemicznego...
Year 2016
-
Thermoelectric properties of bismuth-antimony-telluride alloys obtained by reduction of oxide reagents
PublicationThe BieSbeTe alloys with different Bi/Sb/Te ratio were fabricated by an innovative method. For that purpose the oxide reagents were melted at high temperature, then quenched to form pellets, milled to a powder and finally reduced in hydrogen at various temperatures. Complex structures consisting of connected thin layers forming a continuous path between nano- and micrometer size grains have been obtained. The electrical conductivity,...
-
Synthesis and structural properties of (Y, Sr)(Ti, Fe, Nb)O3−δ perovskite nanoparticles fabricated by modified polymer precursor method
PublicationThe yttrium, iron and niobium doped-SrTiO3 powders have been successfully fabricated by a modified low–temperature synthesis method from a polymer complex. The usage of strontium hydroxide precursor instead of conventional strontium nitrate or strontium carbonate provides to the possibility of significant decrease of annealing temperature. It allows to prepare a material with sphere-shape grains of nanometric size (15–70 nm). The...
-
Structure and thermoelectric properties of Te/Ag/Ge/Sb (TAGS) materials obtained by reduction of melted oxide substrates
PublicationThe Ge0.77Ag0.1Sb0.13Te1alloy was fabricated by a novel two step route. For that purpose firstly the oxide reagents were melted at high temperature and quenched into pellets. After that pellets were milled to the powder and then reduced in hydrogen at various temperatures and for various periods of time. Energy dispersive X-ray analysis indicated the possibility of successful fabrication of stoichiometric thermoelectric materials...
-
Structural and Transportation Properties of Strontium Titanate Composites with Ion Conductive Oxides
PublicationThis paper has been written based on the author’s doctoral dissertation “Structural and transportation properties of strontium and titanate composites with ion conductive oxides”, prepared under the supervision of Prof. Dr. Hab. Eng. Bogusław Kusz at the Department of Solid State Physics of Gdańsk University of Technology. It reports the idea of the thesis and conclusions from the study. Niobium doped strontium titanate (Sr(Ti,Nb)O3)...
-
Problem zatruwania siarką w tlenkowych ogniwach paliwowych zasilanych biogazem
PublicationPraca ta zwiera podsumowanie różnych mechanizmów odpowiedzialnych za spadek wydajności i degradację SOFC zasilanych paliwami węglowodorowymi zanieczyszczonymi związkami siarki. Wymieniono również różne sposoby i strategie stosowane w celu umożliwienia zastosowania biogazu jako paliwa dla tych ogniw, poprzez m.in. modyfikacje materiałów anodowych czy zoptymalizowanie warunków pracy ogniwa.
-
Novel method for metal-oxide glass composite fabrication for use in thermoelectric devices
PublicationA novel method for thermoelectric materials fabrication using a reduction of oxide precursors in hydrogen was reported. On the example of Bi-Sb, Bi-Sb-Te and Te-Ag-Ge-Sb compounds it was shown that this simple and easy method is suitable for fabrication of two-, three- and even multicomponent thermoelectric materials. It allows controlling a composition, microstructure and even type a of electrical charge carriers. As a result...
Year 2011
-
The outline of percolation theory in reference to Solid Oxide Fuel Cell composite anodes
PublicationPrzedstawiono podstawy teoretyczne dotyczące zjawiska perkolacji w układach nieuporządkowanych. Zaprezentowano obecny stan wiedzy na temat wykorzystania teorii perkolacji w materiałach elektrodowych dla tlenkowych ogniw paliwowych.
Year 2012
-
The comparison of SrTi0.98Nb0.02O3–δ-CeO2 and SrTi0.98Nb0.02O3–δ-YSZ composites for use in SOFC anodes
PublicationComposites of Nb-doped strontium titanate mixed with yttria-stabilized zirconia or cerium oxide in 50:50, 70:30 and 85:15 weight ratios were evaluated as possible anode/electrolyte interface materials for solid oxide fuel cells in terms of chemical compatibility, electrical conductivity and mechanical properties. It has been shown that composite samples prepared by typical powder-mixing methods remain single-phase up to 1400°C....
-
The comparison of SrTi0.98Nb0.02O3-δ-CeO2 and SrTi0.98Nb0.02O3-δ-YSZ composites for use in SOFC anodes
PublicationWytworzono i przebadano właściwości strukturalne i elektryczne kompozytów SrTi0.98Nb0.02O3-δ-CeO2 i SrTi0.98Nb0.02O3-δ-YSZ. Przeprowadzono testy materiałów zastosowanych jako anody w tlenkowych ogniwach paliwowych.
-
Teoria perkolacji i jej zastosowania w problematyce elektrod dla tlenkowych ogniw paliwowych
PublicationZaprezentowano podstawy teorii perkolacji oraz jej przykładowe zastosowania do opisu właściwości materiałów kompozytowych
-
Solid oxide fuel cells with Ni-infiltrated perovskite anode
PublicationWytworzono próbki na bazie tytanianu strontu domieszkowanego niobem i przebadano wpływ nasączania niklem na właściwości tych materiałów.
-
Solid Oxide Fuel Cells with Ni infiltrated perovskite anode
PublicationNiobium-doped strontium titanate was used as the anode for a solid oxide fuel cell. Electrolyte-supported cells were prepared with pure perovskite and composite perovskite–yttria–stabilized-zirconia (YSZ) anodes. Fuel cell tests demonstrated significant improvement in power density after infiltration with a small amount of Ni. The obtained values of power densities are comparable with conventional Ni/YSZ cermet anode. In addition,...
-
Perovskites in Solid Oxide Fuel Cells
PublicationPrzeglądowa publikacja dotycząca wykorzystania ceramicznych materiałów perowskitowych w tlenkowych ogniwach paliwowych.
-
Microstructure and electrical properties of SrTi0.98Nb0.02O3-δ-based composites applied as porous layers for SOFCs
PublicationPrzebadano właściwości elektryczne oraz strukturalne kompozytów Sr(Ti,Nb)O3-YSZ i Sr(Ti,Nb)O3-CeO2 naniesionych w postaci warstw porowatych na podłoża YSZ
-
Microstructural and electrical properties of Y0.07Sr0.93-xTiO3-δ perovskite ceramics
PublicationIn order to find a relationship between electrical and microstructural properties, yttrium-doped strontiumtitanate (7 mol%) with various values of strontium nonstoichiometry was investigated and shown in this work.It has been observed that yttrium doping can affect the electrical properties of SrTiO3 to a great extent.Moreover, the microstructural and electrical properties can be influenced by strontium nonstoichiometry.The defect...
-
Microstructural and electrical properties of Y0:07Sr0:93−xTiO3− perovskite ceramics
PublicationIn order to find a relationship between electrical and microstructural properties, yttrium-doped strontium titanate (7 mol%) with various values of strontium nonstoichiometry was investigated and shown in this work. It has been observed that yttrium doping can affect the electrical properties of SrTiO3 to a great extent. Moreover, the microstructural and electrical properties can be influenced by strontium nonstoichiometry. The...
-
Microstructural and electrical properties of Y0.07Sr0.93-xTiO3 perovskite ceramics
PublicationIn order to find a relationship between electrical and microstructural properties, yttrium-doped strontium titanate (7 mol%) with various values of strontium nonstoichiometry was investigated and shown in this work. It has been observed that yttrium doping can affect the electrical properties of SrTiO3 to a great extent. Moreover, the microstructural and electrical properties can be influenced by strontium nonstoichiometry. The...
-
Kompozyty o mieszanym przewodnictwie jonowo-elektronowym na bazie domieszkowanego donorowo tytanianu strontu
PublicationPrzedstawiono właściwości kompozytów na bazie tytanianu strontu domieszkowanego niobem do zastosowań w ogniwach SOFC
Year 2020
-
Sustainable energy system combined biogas-feedSolid Oxide Fuel Cell and Microalgae technology
PublicationIn the new frontier of energy and environmental safety, new efficient and clean safe energy conversion systems are required. In this sense, the present work is framed within the context of Circular Economy and proposes a multidisciplinary study for the development of more efficient, economically viable and non-polluting energy conversion systems, based on the synergetic combination of different technologies: fuel cells, biofuels,...
-
Structural and catalytic properties of ceria layers doped with transition metals for SOFCs fueled by biogas
PublicationThe aim of this paper was to investigate an influence of the nanocrystalline Ce0.8A0.2O2-δ (A = Mn, Fe, Co, Ni, Cu) materials on the direct internal reforming of biogas in SOFC. Structural analysis of fabricated compounds has been done. An in-situ analysis of a composition of outlet gases from operating SOFC was performed using FTIR spectroscopy with simultaneous electrical tests. It was found out, that type of dopant strongly...
-
New synthesis route of highly porous InxCo4Sb12 with strongly reduced thermal conductivity
PublicationHighly porous, In-filled CoSb3 skutterudite materials with an attractive thermoelectric figure of merit (ZT * 1) and corresponding dense samples were fabricated through the cost-effective method of reduction in oxides in dry hydrogen and the pulsed electric current sintering (PECS) method, respectively. The reduction process was described in detail using in situ thermogravimetric analysis of Co2O3, Sb2O3 and In(NO3)35H2O separately...
-
Investigation of praseodymium and samarium co-doped ceria as an anode catalyst for DIR-SOFC fueled by biogas
PublicationThe Pr and Sm co-doped ceria (with up to 20 mol.% of dopants) compounds were examined as catalytic layers on the surface of SOFC anode directly fed by biogas to increase a lifetime and the efficiency of commercially available DIR-SOFC without the usage of an external reformer. The XRD, SEM and EDX methods were used to investigate the structural properties and the composition of fabricated materials. Furthermore, the electrical...
Year 2021
-
Structure and thermoelectric properties of nickel-doped copper selenide synthesised in a hydrogen atmosphere
PublicationNickel-doped copper selenide—Cu2-xNixSe (x = 0; 0.01; 0.02; 0.03)—materials with high thermoelectric properties were synthesised through reduction of reagents in hydrogen. The impact of the nickel content on both the microstructure and thermoelectric properties was examined. The nickel-doped samples’ microstructure differed significantly from pristine copper selenide. Besides Cu2Se, copper precipitations were present in the materials....
Year 2017
-
Structure and thermoelectric properties of Cs-Bi-Te alloys fabricated by different routes of reduction of oxide reagents
PublicationCesium-bismuth-telluride polycrystalline materials were fabricated using a cost-effective method based on a reduction of oxide reagents, leading to a production of a material with good thermoelectric properties. Several samples with various initial stoichiometry were prepared by melting of oxide powders at 1050 °C, quenching, milling to powders and then reducing in pure hydrogen at 400 °C. Another concept was to obtain the CsBi4Te6...
-
Structure and electrical properties of Y, Fe-based perovskite mixed conducting composites fabricated by a modified polymer precursor method
PublicationIn this work, samples of Y0.07Sr0.93Ti1-xFexO3-d with 20, 40, 60 and 80 mol% of iron amount were prepared by a low-temperature polymer precursor method. The SEM-EDS analysis proved that analyzed Y0.07Sr0.93Ti1-xFexO3-d samples were composites of two Ti- and Fe-rich perovskite samples. This kind of composite consists of two phases in which one has a good ionic and the other electronic conductivity, which makes such a composite a...
-
Problem zatruwania związkami siarki w tlenkowych ogniwach paliwowych – wyzwania i perspektywy
PublicationPaliwa stanowiące alternatywę dla wodoru, używane do zasilania tlenkowych ogniw paliwowych, często zanieczyszczone są związkami siarki. Nawet niewielka ich ilość może doprowadzić do degradacji anody, a w konsekwencji całego ogniwa. Mechanizmy zatruwania można podzielić na adsorpcję i tworzenie się siarczków. W zależności od występującego mechanizmu zatrucie siarką może być odwracalne lub nie. Dąży się, zatem do otrzymania nowych...
Year 2022
-
Protocolo de Preparación y Evaluación de Pilas de Combustible de Óxido Sólido
PublicationEste protocolo describe la metodología para la preparación de celdas de óxido sólido y su evaluación como pila de combustible (SOFC). Es fruto del estudio realizado en el marco de los proyectos FCTESTNET [1] y SOFCNET [2] del V Programa Marco, en el Comité IEC/TC105 [3] e investigaciones llevadas a cabo en el laboratorio. Las pilas de combustible son dispositivos capaces de transformar la energía química de un combustible en energía...
-
Preparation of methanation catalysts for high temperature SOEC by β-cyclodextrin-assisted impregnation of nano-CeO2 with transition metal oxides
PublicationThe aim of this work was to prepare and examine the catalytic activity of nanometric CeO2 decorated with transition metal oxides – Ni, Co, Cu, Fe and Mn – towards a high-temperature methanation process under SOEC CO2/H2O simulated co-electrolysis conditions. Samples were prepared using the wet impregnation method via the conventional process and with the addition of native cyclodextrin. The influence of β-cyclodextrin (βCD) onto...
seen 2877 times