Publications
Filters
total: 500
Catalog Publications
-
Direct-contact condensation from vapour- gas mixture in a spray ejector condenser for negative CO2 power plant
PublicationDirect-contact condensation of vapour containing the inert gas on a spray of subcooled liquid exists in a number of technical applications. For example, it may be found in the nuclear industry (e.g. pressurized jet under normal operating conditions, in safety analyses) or in the chemical industry (e.g. mixing-type heat exchanger, degasser, sea water desalting). The problem is also essential to modelling and analysis of some...
-
Shaking table experimental study on models of steel buildings with different types of joints
PublicationThe aim of this paper is to study the response of models of steel buildings with destroyed and non-destroyed joints. The study was conducted experimentally using the shaking table tests. Two steel models were considered. Several types of joints were taken into account: totally destroyed joints, partially destroyed joints, welded joints and joints stiffened with additional metal. Six ground motions were taken into account. The acceleration...
-
Analysis of cyclone separator solutions depending on SEC outlet conditions in nCO2PP
PublicationUtilization of spray ejector condenser in order to carry out direct-contact condensation of vapour with inert gas (CO2) on a spray of subcooled liquid integrated with separator (to make pure CO2) has been proposed for the task of condensation and CO2 separation in the negative CO2 emission gas power plant. Condensation and separation has a significant impact on the thermodynamic efficiency of the entire negative CO2 emission gas...
-
Pounding between high-rise buildings founded on different soil types
PublicationEarthquake-induced pounding is a phenomenon that has been often experienced in previous earthquakes. The aim of this study is to investigate the effect of the soil type on high-rise buildings experiencing earthquake induced-pounding. Pounding between 7-storey and 9-storey buildings is examined under five soil types defined in the ASCE 7-10 code which are hard rock, rock, very dense soil and soft rock, stiff soil and soft clay soil....
-
Bending Moment Control and Weight Optimization in Space Structures by Adding Extra Members in the Optimal Locations
PublicationThis paper investigates the reduction of bending moment in critical members by adding some extra members in the optimum location. Instead of enlarging the size of members to resist the moment, eight additional members are added in the optimum location to reduce the bending moment in the critical members. The total weight of the proposed structure with extra members is less than that of the original structure that resists the induced...
-
Estimation of the Ultimate Strength of FRP Strips-to-Masonry Substrates Bond
PublicationFiber-Reinforced Polymers (FRP) were developed as a new method over the past decades due to their many beneficial mechanical properties, and they are commonly applied to strengthen masonry structures. In this paper, the Artificial Neural Network (ANN), K-fold Cross-Validation (KFCV) technique, Multivariate Adaptive Regression Spline (MARS) method, and M5 Model Tree (M5MT) method were utilized to predict the ultimate strength of...
-
Modified Peptide Molecules As Potential Modulators of Shelterin Protein Functions; TRF1
PublicationIn this work, we present studies on relatively new and still not well-explored potential anticancer targets which are shelterin proteins, in particular the TRF1 protein can be blocked by in silico designed "peptidomimetic" molecules. TRF1 interacts directly with the TIN2 protein, and this protein-protein interaction is crucial for the proper functioning of telomere, which could be blocked by our novel modified peptide molecules....
-
Miniaturized Inline Bandpass Filters Based on Triple-Mode Integrated Coaxial-Waveguide Resonators
PublicationThis work presents a design technique to implement miniaturized cross-coupled bandpass filters in inline physical configurations based on triple-mode resonators. Triple-mode resonances are obtained by using integrated coaxial-waveguide cavity resonators. They consist of two coaxial conducting posts placed in the sidewalls of a rectangular waveguide cavity. In the proposed triplet, a transmission zero (TZ) can be positioned at any...
-
Effects of Deck-Abutment Pounding on the Seismic Fragility Curves of Box-Girder Highway Bridges
PublicationEarthquake-induced pounding in bridges is a complex contact phenomenon in which the dynamic responses of structures, including collisions between deck and abutments, are strongly related to structural properties and earthquake excitation. The goal of this study is to develop and compare the seismic fragility curves of overall system and individual components of regular and irregular box-girder highway bridges in two cases: with...
-
Numerical simulation of cold flow and combustion in a swirl stabilized combustor
PublicationA numerical simulation model was developed to investigate the cold flow and combustion using Ansys FLUENT 2021R1. The governing equations were solved using the pressure-based method, and pressure–velocity coupling was performed using the SIMPLE method. To model the turbulent process, the RSM model was used. Non-premixed model is chosen to solve the chemical kinetics between fuel and oxigen. Radiation heat transfer was calculated...
-
Experimental study on earthquake-induced pounding between steel structures
PublicationPounding between adjacent structures has been repeatedly observed during major earthquakes. The phenomenon may cause some local damage at the points of interactions, it may also lead to substantial destruction, permanent deformations or total collapse of colliding structures. The effects of earthquake-induced structural pounding have been studied for more than three decades now. However, most of the studies concerned masonry as...
-
Makromodele w metodzie różnic skończonych.
PublicationPrzedstawiono nową technikę zwiększającą dokładność i szybkość pełnofalowej analizy złożonych struktur mikrofalowych wykorzystującą technikę redukcji rzędu modelu ang. Model Order Reduction (MOR) w połączeniu z metodami różnic skończonych (FDTD, FDFD). Zastosowanie wysokorozdzielczego algorytmu FDTD i FDFD zawierającego makromodele pozwala na dobre odwzorowanie zmienności pól elektromagnetycznych w całej dziedzinie obliczeniowej....
-
Thermodynamic and electrostatic properties of ternary Oxytricha nova TEBP-DNA complex
PublicationZa pomocą metod chemi obliczeniowej badano właściwości molekularne kompleksu telomerowego białka TEBP z Oxytricha nova w kompleksie trójskkładnikowym z DNA o sekwencji telomerowej. Wyliczone wartości energii kompleksowania wskazują specyficznie na jedną z dróg tworzenia kompleksu, gdzie wpierw podjednostka alfa łaczy się z DNA a następnie podjednostka beta dołącza się do takiego dwuskładnikowego kompleksu. Policzone rozkłady molekularnego...
-
Mesh-free approach to Helmholtz equation on radial basis functions
PublicationMetoda radialnych funkcji bazowych (RBF) jest coraz czesciej stosowana przy rozwiazywaniu rownan rozniczkowych czastkowych oraz zagadnien wlasnych. W szczegolnosci znalazla ona zastosowanie w problemach elektrodynamiki obliczeniowej. W publikacji zastosowano RBF do rozwiazania rownania Helmholtza. Wprowadzono nowy algorytm - adaptacyjny do wyznaczania centrow interpolacyjnych. Przedstawiona metode zastosowano do wyznaczenia rozkladow...
-
Wieloparametryczne, matematyczne modele zastępcze układów mikrofalowych
PublicationArtykuł przedstawia technikę tworzenia wieloparametrycznych modeli zastępczych układów mikrofalowych na podstawie wyników analizy pełnofalowej, wykorzystującą interpolację wymierną funkcji wielu zmiennych. Powstały problem interpolacyjny rozwiązywany jest metodą najmniejszych kwadratów. Procedura tworzenia modelu jest w pełni zautomatyzowana, adaptacyjnie dobieranie są zarówno położenia próbek jak i rząd modelu. Dołączone są przykłady...
-
Multivariate models of inter-resonator couplings for microwave filter synthesis
PublicationArtykuł przedstawia technikę budowy modeli częstotliwości rezonansowej, współczynnika sprzężenia między rezonatorami oraz sprzężenia ze źródłem/obciążeniem. Przedstawiony jest model siedmiu zmiennych uwzglęgniający topologię rezonatorów. Na podstawie modelu wykonana została synteza filtrów mikrofalowych.
-
Efficient finite difference analysis of microstructured optical fibers [on line]
PublicationW pracy przedstawiono nową technikę numerycznej analizy mikrostruktur światłowodowych. Technika ta polega na połączeniu metody różnic skończonych i dyskretnych rozwinięć funkcyjnych. Pozwala to na zmniejszenie rozmiaru macierzy powstających przy analizie problemu, a jednocześnie na bezpośrednią implementację radiacyjnych warunków brzegowych. Testy algorytmu przeprowadzono dla kilku wybranych struktur, uzyskując bardzo dobrą zgodność...
-
Repair of school building in Skrzypne damaged during the Podhale earthquake of November 30, 2004
PublicationW artykule przedstawiono kolejne etapy naprawy budynku szkolnego, który został uszkodzony podczas trzęsienia ziemi na Podhalu 30 listopada 2004 r. W wyniku wstrząsu sejsmicznego poważnemu uszkodzeniu uległa ściana szczytowa oraz znaczna część ścianek działowych wewnątrz budynku.
-
Trzęsienia ziemi 21 września 2004 r. w Polsce północno-wschodniej oraz ich wpływ na obiekty budowlane
Publication21 września 2004 roku w Polsce północno-wschodniej wystąpiły wstrząsy sejsmiczne o magnitudach szacowanych na 4,4 - 5,3 w skali Richtera. W artykule przedstawiono opis zaistniałych zjawisk oraz ocenę ich intensywności i wpływu na konstrukcje budowlane, podając ilustrowane przykłady charakterystycznych uszkodzeń.
-
Analytical and experimental determination of parameters for the non-linear viscoelastic model of earthquake-induced structural pounding
PublicationNieliniowy model lepko-sprężysty umożliwia dokładną symulację siły zderzenia w czasie oraz symulację odpowiedzi konstrukcji podatnej na zderzanie podczas trzęsień ziemi. Jednym z celów niniejszego artykułu jest wyprowadzenie wzoru na zależność pomiędzy liczbą tłumienia zderzenia (parametr wspomnianego modelu), a współczynnikiem odbicia. Kolejnym celem jest wyznaczenie zakresu wartości współczynników odbicia oraz współczynników...
-
Impact force spectrum for damage assessment of earthquake-induced structural pounding
PublicationCelem artykułu jest zastosowanie spektrum siły zderzenia do szacowania zniszczeń powstałych na skutek zderzeń pomiędzy konstrukcjami budowlanymi, do których dochodzi podczas trzęsień ziemi. Wyniki analizy wskazują, iż spektrum takie może być przydatnym narzędziem przy projektowaniu konstrukcji podatnych na zderzenia. Przykłady spektrów odpowiedzi pokazują, iż zapewnienie odpowiedniej przerwy dylatacyjnej lub zgranie parametrów...
-
Charakterystyczne uszkodzenia budowli powstałe w wyniku trzęsień ziemi w Polsce w 2004 roku
PublicationDwa trzęsienia ziemi, które miały miejsce w 2004 roku w Polsce oprócz oczywistych negatywnych odczuć mieszkańców spowodowały szereg uszkodzeń obiektów budowlanych. W referacie przedstawiono opis zaistniałych zjawisk oraz ocenę ich intensywności i wpływu na degradację substancji budowlanej, podając ilustrowane przykłady charakterystycznych uszkodzeń. Według postanowień normowych obszar Polski uważany jest za teren asejsmiczny i...
-
Consequences of neglecting the appropriate safety conditions of structures exposed to seismic excitations - damage examples after the Kaliningrad earthquake
PublicationW artykule przedstawiono przykłady uszkodzeń budowli znajdujących się w złym stanie technicznym, które powstały w wyniku trzęsienia ziemi o epicentrum w Obwodzie Kaliningradzkim. Przykłady te jednoznacznie pokazują, iż zaniedbywanie stanu technicznego konstrukcji narażonych na wstrząsy sejsmiczne może prowadzić do poważnych konsekwencji powodując znaczne straty materialne lub ofiary śmiertelne.
-
Peak impact force for seismic retrofit of pounding-prone structures
PublicationCelem artykułu jest wykorzystanie dwuwymiarowych wykresów pokazujących wartość maksymalnej siły zderzenia (spektrów odpowiedzi) do wzmacniania odporności sejsmicznej budowli narażonych na zderzanie się podczas trzęsień ziemi. Wyniki analizy wskazują, iż wykresy takie mogą być bardzo przydatnym narzędziem przy podejmowaniu decyzji dotyczącej wyboru metody wzmacniania.
-
Trzęsienie ziemi 30 listopada 2004 r. na Podhalu oraz jego wpływ na obiekty budowlane
Publication30 listopada 2004 roku na Podhalu wystąpiło trzęsienie ziemi o magnitudzie szacowanej na 4,7 w skali Richtera. W artykule przedstawiono opis zaistniałego zjawiska, ocenę intensywności oraz wpływu na konstrukcje budowlane, podając ilustrowane przykłady charakterystycznych uszkodzeń.
-
Experimental determination of impact stiffness parameters for the non-linear viscoelastic model of pounding force
PublicationNieliniowy model lepko-sprężysty umożliwia dokładną symulację siły zderzenia w czasie oraz symulację odpowiedzi konstrukcji podatnej na zderzanie podczas trzęsień ziemi. Celem tego artykułu jest eksperymentalne wyznaczenie wartości współczynnika sztywności zderzenia jako parametru tegoż modelu.
-
Stochastic modelling of spatiotemporal earthquake fields for large cylindrical shell tanks
PublicationCelem artykułu jest analiza metody warunkowego modelowania stochastycznego pola losowego trzęsienia ziemi dla dużych cylindrycznych zbiorników powłokowych wykorzystując przestrzenno-czasową funkcję korelacji. Metoda została zastosowana do generacji historii czasowych przyspieszeń w różnych punktach pola. Następnie wygenerowane historie czasowe zostały wykorzystane do analizy dynamicznej odpowiedzi zbiornika powłokowego. Wyniki...
-
On integro-differential equations with delayed arguments
PublicationPraca dotyczy problemów różniczkowo-całkowych z warunkami początkowymi oraz brzegowymi typu okresowego. Podano warunki na istnienie i jednoznaczność rozwiązania. Badania dotyczyły również nierówności różniczkowo-całkowych z argumentami typu opóżnionego. Podano przykłady, które mogą mieć zastosowanie w problemach inżynierskich.
-
Numerical analysis of CO2-water separation in a horizontal double T-junction
PublicationCarbon dioxide is considered one of the main factors leading to global warming. Considering the significant impacts of CO2 on climate change, various technologies have been developed in recent decades to control carbon emission, such as for example CO2 capture and storage. The developed cycle of a negative CO2 emission power plant includes some devices, out of which, separator plays an indispensable role. To this end, T-junction...
-
Spurious Modes in Model Order Reduction in Variational Problems in Electromagnetics
PublicationIn this work, we address an everlasting issue in 2 model order reduction (MOR) in electromagnetics that has 3 remained unnoticed until now. Contrary to what has been 4 previously done, we identify for the very first time spurious 5 modes in MOR for time-harmonic Maxwell’s equations and 6 propose a methodology to remove their negative influence on the 7 reduced order model (ROM) response. These spurious modes 8 have nonzero resonance...
-
Microwave Ring Resonator Based Pressure Sensor
PublicationThis paper demonstrates a microwave pressure sensor, which is based on microstrip line-fed ring resonators. The first ring resonator is loaded with the concentric cylindrical shafts, while the same number of the hollow shanks as the shafts are mounted on the second ring resonator. The arrangement of the cylindrical shaft and hollow shank allows for mechanical movement between two substrates while maintaining electrical contact....
-
Improving the accuracy of subgridding scheme in finite differences method based on Legendre polynomials expansion
PublicationIn this article the Legendre polynomials have been used to interpolate the field at the boundary of the meshes of different densities. The numerical verification of the proposed technique has been carried out in frequency domain. It has been shown that the accuracy of the presented method is very high and stable - the error monotonically decreases as a function of the refinement factor.
-
Advances in macromodeling technique
PublicationThe paper discuses recent advances in the finite differencetime domain method employing macromodels. New techniquesfor creating irregularly shaped macromodels, grouping ofmacromodels and advanced macromodel cloning are introduced.The last technique is particularly important for efficient analysisof the structures based on Photonic Crystals (PhC). The methodallows one to shorten considerably the preprocessing time, theRAM usage...
-
Automated microwave planar filter design with generalized Chebyshev characteristics.
PublicationIn this paper a technique of automatization of design of microwave filters with generalized Chebyshev characteristics is presented. A full wave electromagnetic simulator linked with the Matlab computing environment is used to ensure a rigorous numerical analysis while at the same time allowing automatization. To decrease time of optimization and overall design process, the Cauchy interpolation technique was used. An automated design...
-
Advanced Macromodel Matrix Structure Cloning for FDTD
PublicationWe propose an improved macromodel-based techniquefor efficient analysis of the structures based on PhotonicCrystals (PhC). The technique involves a new structure of thecoupling matrix and advanced cloning of not only the macromodel matrices, but also the coupling matrices SE and SH.The method allows one to shorten considerably the preprocessingtime, the RAM usage and also the iterating speed of performingFDTD. With this...
-
On the synthesis of coupled-lossy resonator filters with unloaded quality factor control
PublicationA technique for fast synthesis of coupling matrix low-pass prototypes of generalized Chebyshev bandpass filters with lossy resonators is presented in this paper. The coupling matrix is found by solving a nonlinear least squares problem based on zeros and poles of filter's transfer functions. Additional constraints are introduced that allow one to control the level of unloaded quality factor of resonators.
-
A diplexer design method using an augmented channel filter approach
PublicationContinuous development in RFID andmicrocontrollers technologies gives new possibilities to createsystems that are able to integrate a lot of sensors based ondifferent technologies. This integration brings us closer to realizethe Ubiquitous Network Society vision. However, many problemsmust be addressed before we will benefit from such systems. Inthis paper we describe concept of integrating RFID technologywith other sensors technologies...
-
Krylov Space Iterative Solvers on Graphics Processing Units
PublicationCUDA architecture was introduced by Nvidia three years ago and since then there have been many promising publications demonstrating a huge potential of Graphics Processing Units (GPUs) in scientific computations. In this paper, we investigate the performance of iterative methods such as cg, minres, gmres, bicg that may be used to solve large sparse real and complex systems of equations arising in computational electromagnetics.
-
Synthesis of coupled lossy resonator filters.
PublicationA technique for fast synthesis of coupling matrix low-pass prototypes of generalized. Chebyshev bandpass filters with lossy resonators is presented in this letter. The coupling matrix is found by solving a nonlinear least squares problem based on zeros and poles of filter's transfer functions.
-
Tuning matrix-vector multiplication on GPU
PublicationA matrix times vector multiplication (matvec) is a cornerstone operation in iterative methods of solving large sparse systems of equations such as the conjugate gradients method (cg), the minimal residual method (minres), the generalized residual method (gmres) and exerts an influence on overall performance of those methods. An implementation of matvec is particularly demanding when one executes computations on a GPU (Graphics...
-
Jacobi and gauss-seidel preconditioned complex conjugate gradient method with GPU acceleration for finite element method
PublicationIn this paper two implementations of iterative solvers for solving complex symmetric and sparse systems resulting from finite element method applied to wave equation are discussed. The problem under investigation is a dielectric resonator antenna (DRA) discretized by FEM with vector elements of the second order (LT/QN). The solvers use the preconditioned conjugate gradient (pcg) method implemented on Graphics Processing Unit (GPU)...
-
Multiple solutions of boundary-value problems for fourth-order differential equations with deviating arguments
PublicationPraca dotyczy równań różniczkowych rzędu czwartego z warunkami brzegowymi i odchylonymi argumentami. Podano wystarczające warunki, dla których problemy dotyczące takich równań mają dodatnie rozwiązania. W pracy rozważa się przypadki kiedy argumenty odchylone są typu opóźnionego lub wyprzedzonego. W celu zapewnienia istnienia przynajmniej trzech dodatnich rozwiązań wykorzystano twierdzenie Avery-Petersona.
-
Assessment of damage due to earthquake-induced pounding between the main building and the stairway tower
PublicationRaporty po trzęsieniach ziemi pokazują, iż występujące podczas wstrząsów sejsmicznych zderzenia pomiędzy sąsiednimi konstrukcjami budowlanymi, lub ich częściami, mogą prowadzić do znacznych uszkodzeń lub nawet całkowitego zniszczenia konstrukcji. Celem niniejszego artykułu jest oszacowanie zakresu i intensywności zniszczeń na skutek zderzeń pomiędzy budynkiem głównym szpitala Olive View a wolnostojącą klatką schodową podczas trzęsienia...
-
Projection framework for hybrid methods derived from finite difference operators in time and frequency domain
PublicationW artykule przedstawiono ogólną koncepcję tworzenia algorytmów hybrydowych na bazie operatorowego sformułowania metody różnic skończonych. Wykorzystano koncepcję projekcji ortogonalnej w przestrzeni skończeniewymiarowej w celu modyfilacji pierwotnego sformułowania.
-
Interactions of amphotericin B derivatives with lipid membranes - a molecular dynamics study
PublicationW pracy analizowano oddziaływanie dwóch nisko-toksycznych pochodnych amfoterycyny B (związki SAmE i PAmE) z modelami błon lipidowych. Badania wykonane zostały za pomocą dynamiki molekularnej. Modele błon oprócz fosfolipidów DMPC zawierały odpowiednio cholesterol (model błony zwierzęcej) lub ertosterol (model błony grzybowej). Analiza wyników wykazała, że obie pochodne amfoterycyny B zachowują się inaczej w błonie cholesterolowej...
-
Theoretical and experimental assessment of parameters for the non-linear viscoelastic model of structural pounding
PublicationZjawisko zderzeń pomiędzy sąsiednimi konstrukcjami budowlanymi podczas trzęsień ziemi jest w ostatnim czasie intensywnie badane z wykorzystaniem różnych modeli numerycznych siły zderzenia w czasie kontaktu. Wyniki badań eksperymentalnych pokazują, iż nieliniowy model lepko-sprężysty jest najdokładniejszy wśród modeli stosowanych do analizy. Model ten zdefiniowany jest poprzez dwa parametry: liczbę tłumienia zderzenia oraz parametr...
-
Trzęsienia ziemi w Polsce w roku 2004
PublicationW 2004 roku na terenie Polski wystąpiły dwa trzęsienia ziemi o magnitudach ok. 4,6 - 4,9 w skali Richtera. Wstrząsy sejsmiczne, oprócz oczywistych negatywnych odczuć mieszkańców, spowodowały szereg uszkodzeń obiektów budowlanych, na szczęście nie wywołując poważnych zagrożeń ich bezpieczeństwa. W artykule przedstawiono opis zaistniałych zjawisk oraz ocenę ich intensywności i wpływu na obiekty budowlane, podając ilustrowane przykłady...
-
Badania dynamiczne modeli konstrukcji budowlanych na stole wstrząsowym
PublicationCelem niniejszego artykułu jest przedstawienie wyników badań eksperymentalnych przeprowadzonych na stole wstrząsowym poddając wymuszeniom sejsmicznym modele dwóch kolidujących ze sobą wież. Wyniki te wskazują, iż zderzenia mogą prowadzić do znacznego wzrostu odpowiedzi konstrukcji, ale mogą mieć również pozytywny wpływ i częściowo wytłumić drgania. Ponadto, wyniki badań pokazały istotny wpływ rodzaju materiału, z którego wykonane...
-
Macromodeling of multiport systems using a fast implementation of the vector fitting method
PublicationMakromodelowanie układów wieloportowych przy użyciu vector fittingu jest czasochłonne oraz wymaga dużych zasobów obliczeniowych w przypadku gdy wszystkie elementy macierzy systemowej dzielą wspólne bieguny. Artykuł prezentuje stabilne rozwiązanie, które usuwa problem rzadkości macierzy poprzez zastosowanie bezpośrednie dekompozycje QR. Jako przykład przedstawiony został 60 portowy układ, który ilustruje oszczędność czasu potrzebnego...
-
Fast multiplexer cad using surrogate models for channel filters synthesis
Publicationartykuł przedstawia metodę szybkiego projektowania multiplekserów mikrofalowych wykorzystującą dokładne modele zastępcze na etapie projektowania kanałów. przedstawiony został przykład trój-kanałowego multipleksera z filtrami dwurodzajowymi.