dr hab. inż. Łukasz Piszczyk
Zatrudnienie
- Profesor uczelni w Katedra Technologii Polimerów
Publikacje
Filtry
wszystkich: 82
Katalog Publikacji
-
Wpływ uniepalniaczy na właściwości mechaniaczne sztywnych pianek poliuretanowych
PublikacjaW celu zmniejszenia palności i polepszenia właściwości mechanicznych pianek poliuretanowych stosuje się antypireny. Zastosowanie tych środków podyktowane jest ty iż sztywne pianki poliuretanowe muszą spełniać określone wymagania, których nie posiada pianka bez napełniacza. Wśród modyfikatorów palności można wyróżnić te, które opóźniają palenie, zmniejszają palność oraz ograniczają dymienie [1-3]. Substancje te mogą działać fizycznie,...
-
Kontrola jakości materiałów polimerowych wytwarzanych metodą wytłaczania: stan obecny i perspektywy rozwoju
PublikacjaNiniejsza praca stanowi przegląd literaturowy metod kontroli jakości materiałów polimerowych wytwarzanych metodą wytłaczania. Scharakteryzowano możliwości kontroli efektywności procesu wytłaczania działających w układach "on-line" oraz "in-line", które polegają na przeprowadzeniu pomiarów w czasie trwania procesu. Opisano potencjał aplikacyjny technik spektroskopowych (IR, UV-VIS), pomiarów właściwości reologicznych, analizy morfologii...
-
Wpływ termoplastycznych kompozycji napełnianych miałem gumowym na wybrane właściwości asfaltu drogowego
PublikacjaDynamiczny rozwój transportu samochodowego zmusza do wykonywania nawierzchni drogowych z materiałów o wysokiej wytrzymałości oraz odporności na odkształcenia trwałe, co znacznie wydłuża żywotność nawierzchni. Polskie przedsiębiorstwo BISEK Sp. z o.o. z Wrocławia we współpracy z Politechniką Wrocławską, jako pierwsze wykorzystało miał gumowy do modyfikacji asfaltów metodą mokrą. W chwili obecnej firma Lotos Asfalt Sp. z o.o. wprowadziła...
-
ELASTYCZNE NANOKOMPOZYTOWE PIANKI POLIURETANOWE
PublikacjaPrzedmiotem badań były elastyczne pianki poliuretanowe modyfikowane nanonapełniaczem z grupy glinokrzemianów warstwowych oraz fosforoorganicznym związkiem zmniejszającym palność. Zbadano wpływ tych napełniaczy na zmiany właściwości fizycznych, mechanicznych oraz palność otrzymanych układów.
-
Mechanical, structural and diffusion studies of hydrogel polyurethane nanocomposites containing modified montmorillonite
PublikacjaW pracy zaprezentowano wyniki badań hydrożeli poliuretanowych zawierających poli(tlenek etylenu) oraz montmorylonit. Otrzymane układy scharakteryzowano z użyciem technik XRD, DMA, badań mechanicznych oraz wyznaczono chłonność wody i parametry dyfuzji.
-
Experimental examination of an elastomeric polymer
PublikacjaA new method of repairing damaged structures by filling the cracks with a specially prepared elastomeric polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure....
-
Właściwości mieszanin typu recyklat polietylenu-miał gumowy modyfikowanych poliizobutylenem w obecności nadtlenków
PublikacjaMiał gumowy poddawano modyfikacji poliizobutylenem metodą mieszania w warunkach ścinania w obecności nadtlenków lub bez nich. Miał gumowy modyfikowany poliizobutylenem przerabiano w mieszalniku firmy Brabender wraz z poprodukcyjnym recyklatem polietylenu wysokiej gęstości w stosunku wagowym 50:50. Określono statyczne i dynamiczne właściwości mechaniczne otrzymanych kompozycji termoplastycznych.
-
Preparation and characterization of rigid polyurethane-polyglycerolnanocomposite foams
PublikacjaThis work reports on the preparation of polyurethane-polyisocyanurate (PUR-PIR) foams containing different polyglycerols and layered silicate nanoclays. The rigid polyurethane foams were obtained in a laboratory scale, in a single step method, from a two-component system with a NCO to OH groups ratio equal to two. The reaction mixture consisted of the proper amounts of a commercial oligoetherpolyol, polyglycerol, catalysts, water,...
-
The influence of temperature on properties of the polymer flexible joint used for strengthening historical masonries
PublikacjaA new method of repairing damaged structures by filling the cracks with a specially prepared elastomeric polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure....
-
Otrzymywanie i właściwości fizyko-mechaniczne sztywnych pianek poliuretanowo-poliglicerynowych
PublikacjaPrzedmiotem badań były sztywne pianki poliuretanowo-poliglicerynowe otrzymane z poligliceryny, użytej jako nowy substytut petrochemicznego poliolu. Sztywne pianki otrzymano metodą jednoetapową przy stosunku grup NCO do OH wynoszącym 2:1. Udział poligliceryny Pole w układach wynosił 35 oraz 70% mas. gramorównoważników poliolu petrochemicznego Rokopolu RF 551. Otrzymane układy scharakteryzowano pod kątem właściwości mechanicznych...
-
rigid polyurethane foams modified with selected nanofillers
PublikacjaThe nanofillers: natural montmoryllonite (MMT) - Bentonite, natural MMT modified with a quaternary ammonium salt - Cloisite30B, has been used in rigid polyurethane foams (PUFs). The influence of fillers amounts on processing parameters, physical-mechanical properties (density, water absorption, brittleness and compression strength) and thermal properties (thermal stability, fire behaviours) of such foams has been analysed. The...
-
Rigid polyurethane foams modified with selected flame retardants
PublikacjaThe flame retardants: expandable graphite, triethylphosphatehas been used in rigid polyurethane foams (PUFs). The influence of fillers amounts on processing parameters, physical-mechanical properties (compression strength, density, water absorption, brittleness)and thermal properties (thermal stability) of such foams has been analyzed.The gel, cram and rise time for PUFs modified with flame retardant has been observed during synthesis...
-
Próba wykorzystania oleju pochodzącego z pirolizy opon samochodowych do produkcji pianek poliuretanowych
PublikacjaPrzedstawiona została próba wykorzystania oleju pochodzącego z pirolizy opon samochodowych jako dodatku do pianek poliuretanowych.
-
Rigid polyurethane foams with different flame retardants and their physical and mechanical properties
PublikacjaRigid polyurethane foams (PUFs) containing 3, 6 or 9 % of one of of two selected fire retardants (FR): oligomeric ethyl ethylene phosphate (Fyrol PNX) and expandable graphite (EG) were prepared, inspected and compared to foam without that fillers as the control. The thermal stability of PUFs was described by horizontal test according to norm: UL 94 HB. Compressive strength and physical properties (density, fragility and water absorption)...
-
Struktura i właściwości sztywnych pianek poliuretanowo-poliglicerynowych
PublikacjaSztywne pianki poliuretanowo-poliglicerynowe otrzymano jednoetapową metodą przy stosunku grup izocyjanianowych do grup hydroksylowych wynoszącym NCO/OH = 2. Użyto poliglicerynę Pole jako substrat poliolowy w ilości 35 i 70% mas. gramorównoważników poliolu petrochemicznego Rokopol RF 551. Następnie otrzymane układy scharakteryzowano pod kątem struktury i właściwości użytkowych.
-
Wpływ bezhalogenowych związków zmniejszających palność na strukturę oraz właściwości mechaniczne i termiczne elastycznych pianek poliuretanowych otrzymanych z poliglicerolu
PublikacjaElastyczne pianki poliuretanowe zostały przygotowane metodą jednostopniową z układu dwukomponentowego o stosunku grup NCO/OH wynoszącym 0.9:1. Pianki poliuretanowe poddano modyfikacji grafitem ekspandowanym oraz jego mieszaniną z fosforowym, bezhalogenowym związkiem zmniejszającym palność o nazwie handlowej Fyrol PNX. Scharakteryzowano statyczne i dynamiczne właściwości mechaniczne, morfologię, właściwości termiczne oraz palność...
-
Morfologia, w³aoeciwooeci mechaniczne i termiczne elastycznych pianek poliuretanowych modyfikowanych glinokrzemianami warstwowymi
PublikacjaWytwarzane z udzia³em poligliceryny elastyczne pianki poliuretanowe modyfikowano za pomoc¹ montmorylonitu sodowego (bentonitu, MMT), mieszaniny bentonitu i bezhalogenowego fosforoorganicznego zwi¹zku zmniejszaj¹cego palnooeæ (Fyrol PNX) oraz, stanowi¹cego nape³niacz hybrydowy, bentonitu modyfikowanego wykorzystywanym uniepalniaczem. Badano mikrostrukturê, w³aoeciwooeci mechaniczne i termiczne modyfikowanych pianek poliuretanowych....
-
Wykorzystanie surowców odnawialnych i odpadowych w syntezie poliuretanów
PublikacjaNa podstawie literatury i badañ w³asnych przedstawiono stan wiedzy na temat mo¿liwooeci stosowania w syntezie poliuretanów surowców odnawialnych i odpadowych, g³ównie polioli pochodzenia rooelinnego, gliceryny odpadowej z produkcji biodiesla i oleju talowego.
-
Elastyczne nanokopozytowe pianki poliuretanowe
PublikacjaPrzedmiotem badań były elastyczne pianki poliuretanowe modyfikowane nanonapełniaczem z grupy glinokrzemianiów warstwowych oraz fosforoorganicznym związkiem zmniejszającym palność.
-
Modification of microporous polyurethane elastomers with different types of ash—morphological, mechanical, and thermal studies
PublikacjaIncorporation of wood ash particles from wood gasification into microporous polyurethane elastomers has been investigated and compared to addition of commercially available microspheres resulting from coal burning. Samples were modified with 3 and 6 wt% of fillers. Structure, mechanical, and thermal properties of obtained elastomers were investigated. Incorporation of both types of ash particles decreased the density of polyurethanes...
-
Kompozycje poliuretanowo-szklane
PublikacjaPrzedstawiono sposób otrzymania kompozycji poliuretanowoszklanych, napełnianych różną ilością włókna szklanego o określonej długości. Kompozycje otrzymywano metodą dwuetapową. W etapie pierwszym syntezowano prepolimery uretanowe z diizocyjanianu i Polesu 55/20. W drugim etapie do prepolimeru dodawano włókno oraz przedłużacz, lubsystem poliuretanowy dozowano w dwóch porcjach do formy stalowej zawierającej włókno szklane ułożone...
-
Ocena właściwości przetwórczych, mechanicznych oraz morfologii spienianych kompozytów poliuretanowo-gumowych
PublikacjaSpienione kompozyty poliuretanowo-gumowe otrzymano metodą jednostopniową z układu dwukomponentowego. Scharakteryzowano właściwości przetwórcze, właściwości mechaniczne oraz morfologię uzyskanych kompozytów. Uzyskane wyniki wskazują, że wprowadzenie miału gumowego do matrycy poliuretanowej może stanowić bardzo atrakcyjną możliwość wtórnego wykorzystania odpadów gumowych.
-
Morfologia, właściwości mechaniczne oraz palność spienionych materiałów poliuretanowo-poliglicerynowych modyfikowanych grafitem ekspandowanym
PublikacjaSpienione kompozyty poliuretanowo-glicerynowe modyfikowane grafitem ekspandowanymotrzymano metodą jednostopniową z układu dwukomponentowego, gdzie jako składnik poliolowyzastosowano odpadową poliglicerynę. Scharakteryzowano morfologię, właściwościmechaniczne oraz klasę palności otrzymanych materiałów. Uzyskane wyniki wskazują, żewprowadzenie poligliceryny do matrycy poliuretanowej umożliwia otrzymanie materiałówcharakteryzujących...
-
Preparation and characterization of rigid polyurethane -polyglycerol nanocomposite foams
PublikacjaThis work reports on the preparation of polyurethane–polyisocyanurate (PUR–PIR) foams containing different polyglycerols and layered silicate nanoclays. The rigid polyurethane foams were obtained in a laboratory scale, in a single step method, from a two-component system with a NCO to OH groups ratio equal to two. The reaction mixture consisted of the proper amounts of a commercial oligoetherpolyol, polyglycerol, catalysts, water,...
-
Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams
PublikacjaThe increasing interest in polyurethane materials has raised the question of the environmental impact of these materials. For this reason, the scientists aim to find an extremely difficult balance between new material technologies and sustainable development. This work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties...
-
Termooksydacyjna i fotooksydacyjna degradacja pianek poliuretanowych
PublikacjaPrzeprowadzono ocenę efektywności działania wybranych środków przeciwstarzeniowych w sztywnych piankach poliuretanowych, otrzymywanych na drodze syntezy jednoetapowej. Ocenę tę oparto na pomia-rach zmian barwy oraz wytrzymałości mechanicznej zsyntezowanych materiałów. Na podstawie analizy uzyskanych wyników stwierdzono, iż dodatek 3% mieszaniny I rzędowego antyutleniacza fenolowego oraz benzotriazolowego absorbera UV znacząco zmniejsza...
-
Renewable Resources for Polyurethanes and Polyurethane Composites: A Review
PublikacjaEach year, more than two million tons of polyurethane is produced in the EU by reacting isocyanates with polyols made from fossil fuel. In addition, there are appreciable quantities of petroleum based functional additives applied in the industry nowadays for both polyols and polyurethane materials. It is therefore of key importance to develop sustainable economically viable polyols with enhanced functionalities, and thereby reducing...
-
A recent developments in polyurethane foams containing a low-cost and pro-ecological modifiers
PublikacjaDiversity of the polyurethane (PU) foams applications cause that investigation of the relationships between their structure and properties is currently very popular topic among the many research institutions and companies. At the turn of the last years many scientific papers about PU foams and their composites were published. The one of the main research trends in this field is related to the reduction of production costs of...
-
Microwave assisted liquefaction with crude glycerol as a potential method of brewer's spent grain utylization
PublikacjaBrewer's spent grain was applied as a low-cost industrial type of lignocellulose biomass in a liquefaction and solvent: biomass ratio on the efficiency of the process, chemical structure and basic properties of obtained prepared polyols and soil residues shed light on the biomass degradation mechanism through application of microwaves and further reaction of degradation products with solvent particles.
-
Sztywne pianki poliuretanowe modyfikowane wybranymi nanonapełniaczami
PublikacjaZwiększona odporność nanokompozytów na działanie ognia polega na dobrym rozlokowaniu lamelarnych struktur oraz na ograniczeniu mobilności makromolekuł poprzez powstające mocne wiązanie polimer-nanonapełniacz, co utrudnia penetrację ognia do wnętrza materiału polimerowego. Badania przeprowadzone w Katedrze Technologii Polimerów Politechniki Gdańskiej miały na celu zbadanie wpływu wybranych nanonapełniaczy na bazie montmorylonitu...
-
The influence of different flame retardants on thermal stability, mechanical and physical properties of rigid polyurethane foams blown with n-pentane
PublikacjaW artykule opisano wpływ klasycznych uniepalniaczy na właściwości sztywnych pianek poliuretanowych. Opisano 7 układów piankowych oraz wyniki charakterystyki fizyczno-mechanicznej oraz stabilności termicznej.
-
Otrzymywanie spienionych materiałów poliuretanowych z wykorzystaniem biomasy celulozowej
PublikacjaW niniejszej pracy przedstawiono sposób otrzymywania oraz charakterystykę sztywnych pianek poliuretanowych (SPUR) otrzymanych z biopoliolu uzyskanego w wyniku upłynniania biomasy celulozowej frakcją glicerynową. Opisano również sposób otrzymywania biopoliolu (EP1) jego charakterystykę oraz podstawowe właściwości fizyko-chemiczne. EP1 otrzymano przez upłynnienie biomasy celulozowej w surowej glicerynie wykorzystując H2SO4 jako...
-
Polyurethane-wood composites (PU-WC) as a method of wood waste management
PublikacjaIn recent years, due to the progressive environmental degradation and increase of environmental awareness, the sustainability of production systems in wood processing, the wood industry, and wood waste management is a crucial issue for European industry and society. Consequently, the problem of generating wood-like waste and the associated risks has become an increasingly noticeable challenge for science. Although various methods...
-
Analiza właściwości wytrzymałościowych elastomerów uretanowych napełnionych włóknem szklanym
PublikacjaCelem pracy było otrzymanie elastomerów uretanowych napełnionych niewielką ilością włókna szklanego o długości ok. 5 mm oraz zbadanie wpływu włókna na właściwości wytrzymałościowe otrzymanego materiału.Poliuretany syntezowano metodą dwuetapową. Na podstawie wyników badań stwierdzono, że włókno szklane o zastosowanej długości i w przyjętej ilości nie powoduje wzrostu wytrzymałości na rozciąganie oraz wydłużenia względnego przy...
-
Enhancement of PUR/PIR foam thermal stability after addition of Zostera marina biomass component investigated via thermal analysis and isoconversional kinetics
PublikacjaIn the present work, a thorough thermogravimetric (TG) analysis of bio-based polyurethane–polyisocyanurate (PUR–PIR) foams in both nitrogen and oxygen atmosphere is performed. A sustainable element of the foam is a biopolyol obtained via acid-catalyzed liquefaction of Zostera marina and Enteromorpha Algae biomass. Based on isoconversional analysis and apparent activation energies, several conclusions are obtained. In contradiction...
-
Polyurethanes for Coating, Adhesives, and Other Applications
PublikacjaAn interesting group of polyurethane (PU) materials are coatings, adhesives, sealants, and thickeners. A wide base of raw materials and various methods of PU synthesis allows production of materials with a wide range of properties that can be commonly used in many industries. This chapter describes the main types of PU coatings and adhesives and special application PUs and the methods of their production. The materials described...
-
A novel approach in wood waste utilization for manufacturing of catalyst-free polyurethane-wood composites (PU-WC)
PublikacjaIn recent decades, due to the increase in environmental awareness and noticeable environmental degradation, the area of wood waste management has attracted increasing attention. The purpose of this study is to develop a new type of highly filled polyurethane wood-composite (PU-WC) by the utilization of large amount of wood wastes without addition of a catalyst. Although wood-plastic composites (WPCs) are widely known, there is...
-
Physical and mechanical properties of rigid polyurethane faoms modified with selected flame retardants or layered silicates
PublikacjaW pracy przedstawiono charakterystykę pianek poliuretanowych zawierających klasyczne środki uniepalniające oraz nanonapełniacze z grupy glinokrzemianów warstwowych. Zbadano wpływ zarówno nanonapełniaczy na bazie naturalnego montmorylonitu, jak i modyfikowanych glinokrzemianów. Uzyskane spienione poliuretanowe o zmniejszonej palności charakteryzowano z wykorzystaniem różnych technik badawczych, między innymi wykonano badania DMA,...
-
Synthesis and Physicochemical Characteristics of Chitosan-Based Polyurethane Flexible Foams
PublikacjaThe use of shrimp waste to obtain chitosan (Ch) is an essential issue, considering a circular economy, waste management, and its application to environmentally friendly materials. In this study, northern prawn shells were utilized to obtain Ch, which could then be used for synthesizing chitosan-based polyurethane (PUR+Ch) foams with different Ch concentration. The chemical structure, morphology, hardness, thermal properties, viscoelastic...
-
Influence of Surface-Modified Montmorillonite Clays on the Properties of Elastomeric Thin Layer Nanocomposites
PublikacjaIn recent years, polyurethane nanocomposites have attracted more attention due to the massive demand for materials with increasingly exceptional mechanical, optical, electrical, and thermal properties. As nanofillers have a high surface area, the interaction between the nanofiller and the polymer matrix is an essential issue for these materials. The main aim of this study is to validate the impact of the montmorillonite nanofiller...
-
Physico‐Mechanical Properties and Flammability of PUR/PIR Foams Containing Expandable Graphite Core‐Shell Composite Particles
PublikacjaIn this work, polyurethane/polyisocyanurate (PUR/PIR) foams were modified by two types of expandable graphite (EG) core-shell composite particles. The pulverized EG core-shell composite particles were prepared during emulsion polymerization using methyl methacrylate or glycidyl methacrylate for the synthesis of the polymeric shells (poly(methyl methacrylate) (PMMA) and poly (glycidyl methacrylate) (PGMA)), and then the obtained EG_PMMA...
-
Bio‐polyols synthesized by liquefaction of cellulose: Influence of liquefaction solvent molecular weight
PublikacjaCurrently, the plastics industry including polyurethanes is based on the use of petrochemicals. For this reason, scientists are looking for new types of renewable resources for the substitution of petrochemical substances. This work aims to evaluate the effect of polyethylene glycols (PEG) with different molecular mass impact on properties of bio-based polyols synthesized via biomass liquefaction of cellulose. To date, research...
-
Elastic polyurethane foams containing graphene nanoplatelets
PublikacjaElastic polyurethane foams were produced from two-component polyurethane systems (SPECFLEX NE 113 izocyjanian/NR 816 poliol system—SPC and Elastic MBMarket company system POLYOL ET MB 500/ISO ET MB 800—ET) by using a one-step method. The foams were a graphene nanoplatelets (GNP) in the amount ranging from 1 to 2 wt.%. The effect of the nanofiller on polyurethane matrix was determined by analyzing the chemical structure, static...
-
Interfacial adhesion evaluation in (low-density polyethylene)/elastomer blends
PublikacjaLow-density polyethylene (LDPE) with different elastomers at a ratio of 50/50 wt% blends was prepared by using a co-rotating twin-screw extruder. Three kinds of elastomers were used: ground tire rubber (GTR), partially crosslinked butyl rubber (KalarVR ), and styrenebutadiene- rubber block copolymer (SBS; KratonVR ). For better characterization of interaction between polyethylene and elastomer, influence of the type of elastomer on...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublikacjaIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Molecular dynamics studies of polyurethane nanocomposite hydrogels
PublikacjaPolyurethane PEO-based hydrogels have a broad range of biomedical applicability. They are attractive for drug-controlled delivery systems, surgical implants and wound healing dressings. In this study, a PEO based polyurethane hydrogels containing Cloisite R 30B, an organically modified clay mineral, was synthesized. Structure of nanocomposite hydrogels was determined using XRD technique. Its molecular dynamics was studied by means...
-
Nanosize effect of clay mineral nanoparticles on the drug diffusion processes in polyurethane nanocomposite hydrogels
PublikacjaStudies of swelling and release of naproxen sodium (NAP) solution by polyurethane nanocomposite hydrogels containing Cloisite® 30B (organically modified montmorillonite (OMMT)) have been performed. Polyurethane nanocomposite hydrogels are hybrid, nontoxic biomaterials with unique swelling and release properties in comparison with unmodified hydrogels. These features enable to use nanocomposite hydrogels as a modern wound dressing....
-
Bio-Based Polyurethane Networks Derived from Liquefied Sawdust
PublikacjaThe utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated. The liquefaction process was carried...
-
Thermal and Mechanical Properties of Microporous Polyurethanes Modified with Reduced Graphene Oxide
PublikacjaMicroporous polyurethanes (MPU) were modified by adding 0.25%–1.25 wt% of reduced graphene oxide (RGO). The materials were prepared without solvent via in situ polymerization. From a technological point of view, it is very important to obtain functional materials by using reacting compounds only. The thermal characteristics of obtained MPU were investigated using TGA, DSC, and DMA techniques. In comparison to nonmodified microporous...
-
Characterization of Highly Filled Glass Fiber/Carbon Fiber Polyurethane Composites with the Addition of Bio-Polyol Obtained through Biomass Liquefaction
PublikacjaThis work aims to investigate the process of obtaining highly filled glass and carbon fiber composites. Composites were manufactured using previously obtained cellulose derived polyol, polymeric methylene diphenyl diisocyanate (pMDI). As a catalyst, dibutyltin dilaurate 95% and Dabco® 33-LV were used. It was found that the addition of carbon and glass fibers into the polymer matrix causes an increase in the mechanical properties...
wyświetlono 3282 razy