Mode shapes of a beam and plate with defects, obtained by experimental modal analysis

Opis

The DataSet contains the experimental results of the first mode shape for a beam and a plate.

The beam of length L = 480 mm, width B = 60 mm and height H = 20 mm was made of polymethylmethacrylate (PMMA). The beam contained an open crack of length L_r = 2 mm and height a = 7 mm at a distance L₁ = 120 mm from the clamped end. The depth of the crack was 35% of the height of the beam.

The steel plate of length L = 560 mm, width B = 480 mm and height H = 2 mm was fixed on all four edges. The plate contained a rectangular defect of length L_r = 80 mm, width B_r = 80 mm and height of a = 0.5 mm. The distance from the defect left-bottom corner to the plate left-bottom corner in horizontal and vertical directions was L₁ = 200 mm and B₁ = 200 mm, respectively. The area of the flaw was 2.4 % of the plate area and the depth of the flaw was 25 % of the plate height.

The beam was subjected to dynamic impulse loading at 48 points along the length of the beam, perpendicular to the beam axis, while the plate was subjected to impulse loading at 143 points on its surface. Measurements were made using an accelerometer to record the response of the structure. The dynamic impulse loading was induced by the modal hammer PCB 086C03. The data was collected using the Pulse 3650C data acquisition system.

More detailed information on this study can be found in the paper:

Rucka M., Wilde K.: Application of continuous wavelet transform in vibration based damage detection method for beam and plates. Journal of Sound and Vibration 297: 536-550, 2006, doi:10.1016/j.jsv.2006.04.015

Plik z danymi badawczymi

data_mode_shapes_beam_plate.zip

2.7 kB, S3 ETag 40f913c4d38eddc368cb757430b1a07e-1, pobrań: 59

Hash pliku liczony jest ze wzoru
hexmd5(md5(part1)+md5(part2)+...)-{parts_count} gdzie pojedyncza część pliku jest wielkości 512 MB

Przykładowy skrypt do wyliczenia:
https://github.com/antespi/s3md5

pobierz

Informacje szczegółowe o pliku

Licencja:: otwiera się w nowej karcie

CC BY-NC

Użycie niekomercyjne

Informacje szczegółowe

Rok publikacji:

2023

Data zatwierdzenia:

2023-10-24

Język danych badawczych:

angielski

Dyscypliny:

Inżynieria lądowa i transport (Dziedzina nauk inżynieryjno-technicznych)
inżynieria mechaniczna (Dziedzina nauk inżynieryjno-technicznych)

DOI:

10.34808/p3pv-xv42

Weryfikacja:

Politechnika Gdańska

Słowa kluczowe

Powiązane zasoby

publikacja Application of continuous wavelet transform in vibration based damage detection method for beams and plates

Cytuj jako

Autorzy

wyświetlono 186 razy

Wyszukiwarka