Comparison of the fracture toughness of pine wood determined on the basis of orthogonal linear cutting and frame sawing

Daniel Chuchała; Kazimierz Orłowski; Gerhard Sinn; Aleksandra Suchta

doi:10.17423/afx.2021.63.1.07

Comparison of the fracture toughness of pine wood determined on the basis of orthogonal linear cutting and frame sawing

Abstrakt

In this paper, the values of the fracture toughness of Scots pine determined by cutting tests are presented. The cutting tests were carried out using the samples of Scotch pine (Pinus sylvestris L.) from Pomeranian Region, Poland. These experiments were carried out on two research stands: orthogonal linear cutting tests were conducted using the microtome instrument and the frame saw PRW-15M was used for sawing tests. The values of the fracture toughness were determined following the recorded values of cutting power during the cutting tests (PRW-15M) and cutting forces (microtome instrument) with the use of models based on the elements of fracture mechanics. It was observed that the fracture toughness values determined following the orthogonal linear cutting tests were significantly lower, what could be caused by bending the wood fibers under the pressure of the cutting force.

Cytowania

0

CrossRef
0

Web of Science
2

Scopus

Autorzy (4)

Daniel Chuchała dr hab. inż.
Kazimierz Orłowski prof. dr hab. inż.
Gerhard Sinn
Aleksandra Suchta (dawniej: Aleksandra Konopka) dr inż.

Cytuj jako

Pełna treść

pobierz publikację

pobrano 98 razy

Wersja publikacji: Accepted albo Published Version
Licencja: Copyright (2021 Technická univerzita vo Zvolene)

Słowa kluczowe

FRACTURE TOUGHNESS, ORTHOGONAL CUTTING, CUTTING FORCE, CUTTING POWER, FRAME SAWING, PINE WOOD

Informacje szczegółowe

Kategoria:: Publikacja w czasopiśmie
Typ:: artykuły w czasopismach
Opublikowano w:: ACTA FACULTATIS XYLOLOGIAE ZVOLEN nr 63, strony 75 - 83,
ISSN: 1336-3824
Język:: angielski
Rok wydania:: 2021
Opis bibliograficzny:: Chuchała D., Orłowski K., Sinn G., Konopka A.: Comparison of the fracture toughness of pine wood determined on the basis of orthogonal linear cutting and frame sawing// ACTA FACULTATIS XYLOLOGIAE ZVOLEN -Vol. 63,iss. 1 (2021), s.75-83
DOI:: Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.17423/afx.2021.63.1.07
Weryfikacja:: Politechnika Gdańska