Wyszukiwarka
Abstrakt
In this study, the effects of the traverse and rotational velocities of the noncontact shoulder tool on the heat generation and heated flux during the friction stir joining of high-density polyamide 6 (PA6) polymer were investigated. The computational fluid dynamics (CFD) method was employed to simulate the thermomechanical phenomena during the friction stir joining (FSJ) process of PA6. A developed model was used to consider the void formation and thermochemical properties of PA6. The surface and internal heat flow, material flow, and geometry of the joint were simulated, and an experimental study evaluated the simulation results. The simulation results indicated that the stir zone formed was smaller than regular joints with a noncontact shoulder tool. Despite the polymer’s traditional FSJ, heat generation and material flow do not differ significantly between advancing and retreating sides. On the other hand, the surface flow is not formed, and the surface temperature gradient is in a narrow line behind the tool. The material velocity increased at higher rotational speed and lower transverse velocity and in the stir zone with more giant geometry forms. The maximum generated heat was 204 C, and the maximum material velocity was predicted at 0.44 m/s in the stir zone, achieved at 440 rpm and 40 mm/min tool velocities.
Cytowania
-
1 3
CrossRef
-
0
Web of Science
-
1 5
Scopus
Autorzy (5)
-
Raheem Al-Sabur
-
Hassanein I. Khalaf
-
Hesamoddin Aghajani Derazkola
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma15124214
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
Materials
nr 15,
ISSN: 1996-1944 - Język:
- angielski
- Rok wydania:
- 2022
- Opis bibliograficzny:
- Al-Sabur R., Khalaf H. I., Świerczyńska A., Rogalski G., Derazkola H. A.: Effects of Noncontact Shoulder Tool Velocities on Friction Stir Joining of Polyamide 6 (PA6)// Materials -Vol. 15,iss. 12 (2022), s.4214-
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma15124214
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 108 razy
Publikacje, które mogą cię zainteresować
Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
- S. Memon,
- J. Tomków,
- H. A. Derazkola
Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
- S. Memon,
- D. Fydrych,
- A. C. Fernandez
- + 2 autorów
Effect of Pin Shape on Thermal History of Aluminum-Steel Friction Stir Welded Joint: Computational Fluid Dynamic Modeling and Validation
- D. O. Bokov,
- M. A. Jawad,
- W. Suksatan
- + 4 autorów
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
- S. Chupradit,
- D. O. Bokov,
- W. Suksatan
- + 4 autorów