Fabrication and characterization of boron-doped nanocrystalline diamond-coated MEMS probes - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Fabrication and characterization of boron-doped nanocrystalline diamond-coated MEMS probes

Abstrakt

Fabrication processes of thin boron-doped nanocrystalline diamond (B-NCD) films on silicon-based micro- and nano-electromechanical structures have been investigated. Nanocrystalline boron doped -diamond (B-NCD) films were deposited using Microwave Plasma Assisted Chemical Vapour Deposition (MW PA CVD) method. The variation of B-NCD morphology, structure and optical parameters were particularly investigated. The use of truncated cone-shaped substrate holder enabled to grow thin fully encapsulated nanocrystalline B-NCD with a thickness of approx. 60 nm and RMS roughness of 17 nm. Raman spectra present the typical boron-doped nanocrystalline diamond line recorded at 1148 cm-1. Moreover, the change of mechanical parameters of silicon cantilevers over-coated with boron-doped diamond films was investigated with laser vibrometer. The increase of resonance to frequency of over-coated cantilever is attributed to the change of spring constant caused by B-NCD coating. Topography and electrical parameters of boron-doped diamond films were investigated by tapping mode AFM and electrical mode of AFM – Kelvin probe force microscopy (KPFM). The crystallites-grain size was recorded at 153 nm and 238 nm for boron-doped film and undoped respectively. Based on the contact potential difference data from the KPFM measurements, the work function of diamond layers were estimated. For the undoped diamond films average CPD of 650 mV and for boron doped layer 155 mV were achieved. Based on CPD values, the values of work functions were calculated as 4.65 eV and 5.15 eV for doped and undoped diamond film respectively. Boron-doping increases the carrier density and the conductivity of the material and, consequently, the Fermi level.

Cytowania

  • 2 2

    CrossRef

  • 0

    Web of Science

  • 2 1

    Scopus

Autorzy (8)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 31 razy
Wersja publikacji
Accepted albo Published Version
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00339-016-9829-9
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuł w czasopiśmie wyróżnionym w JCR
Opublikowano w:
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING nr 122, strony 1 - 9,
ISSN: 0947-8396
Język:
angielski
Rok wydania:
2016
Opis bibliograficzny:
Bogdanowicz R., Sobaszek M., Ficek M., , , , Sawczak M., Gotszalk T.: Fabrication and characterization of boron-doped nanocrystalline diamond-coated MEMS probes// APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING. -Vol. 122, nr. 270 (2016), s.1-9
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00339-016-9829-9
Weryfikacja:
Politechnika Gdańska

wyświetlono 173 razy

Publikacje, które mogą cię zainteresować

Optical and electrical properties of ultrathin transparent nanocrystalline boron-doped diamond electrodes

2015

Optically transparent boron-doped nanocrystalline diamond films for spectroelectrochemical measurements on different substrates

  • M. Sobaszek,
  • K. Siuzdak,
  • Ł. Skowroński
  • + 2 autorów
2015

Tailoring the optical parameters of optical fiber interferometer with dedicated boron-doped nanocrystalline diamond thin film

2017

Charge-based deep level transient spectroscopy of B-doped and undoped polycrystalline diamond films

2017
Meta Tagi