Failure mode prediction for composite structural insulated panels with MgO board facings - Publikacja - MOST Wiedzy

Wyszukiwarka

Failure mode prediction for composite structural insulated panels with MgO board facings

Abstrakt

Sandwich panels are readily used in civil engineering due to their high strength to weight ratio and the ease and speed of assembly. The idea of a sandwich section is to combine thin and durable facings with a light-weight core and the choice of materials used allows obtaining the desired behaviour. Panels in consideration consist of MgO (magnesium oxide) board facings and expanded polystyrene core and are characterized by immunity to biological corrosion, a high thermal insulation and a relatively low impact on environment. Customizing the range of panels to meet market needs requires frequent size changes, leading to different failure modes, which are identified in a series of costly full-scale laboratory tests. A nonlinear numerical model was created with a use of a commercial ABAQUS code and a user-defined procedure, which is able to reproduce observed failure mechanisms; its parameters were established on the basis of small-scale tests and numerical experiments. The model was validated by a comparison with the results of the full-scale bending and compression tests. The results obtained were in satisfactory agreement with the test data.

Cytowania

  • 3

    CrossRef

  • 0

    Web of Science

  • 4

    Scopus

Cytuj jako

Pełna treść

pobierz publikację
pobrano 44 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Copyright (AIP Publishing)

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Aktywność konferencyjna
Typ:
materiały konferencyjne indeksowane w Web of Science
Tytuł wydania:
22nd International Conference on Computer Methods in Mechanics (CMM) strony 1 - 11
ISSN:
0094-243X
Język:
angielski
Rok wydania:
2018
Opis bibliograficzny:
Smakosz Ł., Kreja I..: Failure mode prediction for composite structural insulated panels with MgO board facings, W: 22nd International Conference on Computer Methods in Mechanics (CMM), 2018, ,.
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1063/1.5019058
Bibliografia: test
  1. L. Alameda, V. Calderón, C. Junco, A. Rodríguez, J. Gadea and S. Gutiérrez-González, Materiales de Construcción 66(324), e100 (2016). otwiera się w nowej karcie
  2. H. G. Allen, Analysis and design of structural sandwich panels, edited by B.G. Neal (Pergamon Press, London, 1969).
  3. R. Studziński, Z. Pozorski and A. Garstecki, Journal of Theoretical and Applied Mechanics 47(3), pp. 685-699 (2009). otwiera się w nowej karcie
  4. R. Studziński, Z. Pozorski and A. Garstecki, Journal of Constructional Steel Research 104, pp. 227-234 (2015). otwiera się w nowej karcie
  5. J. Pozorska, Z. Pozorski and Ł. Janik, Journal of Applied Mathematics and Computational Mechanics 16(2), pp. 113-121 (2017). otwiera się w nowej karcie
  6. J. Pozorska and Z. Pozorski, Procedia Engineering 177, pp. 168-174 (2017). otwiera się w nowej karcie
  7. M. Chuda-Kowalska and M. Malendowski, "Sensitivity analysis of behavior of sandwich plate with PU foam core with respect to boundary conditions and material model", Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, The 3rd Polish Congress of Mechanics & 21st International Conference on Computer Methods in Mechanics Proceedings, edited by M. Kleiber et al. (CRC Press, London, 2016), pp. 125-128. otwiera się w nowej karcie
  8. M. Chuda-Kowalska and M. Malendowski, Journal of Applied Mathematics and Computational Mechanics 15(3), pp. 15-25 (2016). otwiera się w nowej karcie
  9. M. Chuda-Kowalska, Z. Pozorski and A. Garstecki, "Experimental Determination of Shear Rigidity of Sandwich Panels with Soft Core", Modern Building Materials, Structures and Techniques, The 10th International Conference Proceedings (Vilnius Gediminas Technical University, Vilnus, 2010), pp 56-63. otwiera się w nowej karcie
  10. W. Chen and H. Hao, Materials and Design 60, pp. 409-423 (2014). otwiera się w nowej karcie
  11. W. Chen, H. Hao, S. Chen and F. Hernandez, Materials and Design 84, pp. 194-203 (2015). otwiera się w nowej karcie
  12. W. Chen, H. Hao, D. Hughes, Y. Shi, J. Cui and Z.-X. Li, Materials and Design 69, pp. 170-180 (2015). otwiera się w nowej karcie
  13. M. Kujawa and C. Szymczak, Thin-Walled Structures 75, pp. 43-52 (2014). otwiera się w nowej karcie
  14. U. Caliskan and M. K. Apalak, Composites Part B 112, pp. 158-175 (2017). otwiera się w nowej karcie
  15. A. Kayello, H. Ge, A. Athienitis and J. Rao, Building and Environment 115, pp. 345-357 (2017). otwiera się w nowej karcie
  16. C. Borsellino, L. Calabrese and A. Valenza, Composites Science and Technology 64, pp. 1709-1715 (2004). otwiera się w nowej karcie
  17. M. A. Mousa and N. Uddin, Advanced Composite Materials 20, pp. 547-567 (2011). otwiera się w nowej karcie
  18. M. A. Mousa and N. Uddin, Materials and Design 32, pp. 766-772 (2011). otwiera się w nowej karcie
  19. M. A. Mousa and N. Uddin, Engineering Structures 41, pp. 320-334 (2012). otwiera się w nowej karcie
  20. A. Manalo, Construction and Building Materials 41, pp. 642-653 (2013). otwiera się w nowej karcie
  21. A. Mostafa, K. Shankar and E. V. Morozov, Applied Composite Materials 21, pp. 661-675 (2014). otwiera się w nowej karcie
  22. M. Miśkiewicz, K. Daszkiewicz, T. Ferenc, W. Witkowski and J. Chróścielewski, "Experimental tests and numerical simulations of full scale composite sandwich segment of a foot-and cycle-bridge", Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, The 3rd Polish Congress of Mechanics & 21st International Conference on Computer Methods in Mechanics Proceedings, edited by M. Kleiber et al. (CRC Press, London, 2016), pp. 401-404. otwiera się w nowej karcie
  23. M. Miśkiewicz, Ł. Pyrzowski, J. Chróścielewski and K. Wilde, "Structural Health Monitoring of Composite Shell Footbridge for Its Design Validation", 2016 Baltic Geodetic Congress (BGC Geomatics), (IEEE, New York, 2016), pp. 228-233. otwiera się w nowej karcie
  24. J. Chróścielewski, M. Miśkiewicz, Ł. Pyrzowski, B. Sobczyk and K. Wilde, Composites Part B 126, pp. 153- 161 (2017). otwiera się w nowej karcie
  25. Dassault Systèmes, Abaqus Analysis User's Manual, Providence, RI, USA, 2010, see https://www.3ds.com/.
  26. A. Wawrzynowicz, M. Krzaczek and J. Tejchman, Archives of Acoustics 39(3), 351-364 (2014). otwiera się w nowej karcie
  27. Ł. Smakosz and J. Tejchman, Materials and Design 54, pp. 1068-1082 (2014). otwiera się w nowej karcie
  28. Ł. Smakosz and I. Kreja, "Experimental and numerical evaluation of mechanical behaviour of composite structural insulated panels", Recent Advances in Computational Mechanics, 20th International Conference on Computer Methods in Mechanics Proceedings, edited by T. Łodygowski et al. (CRC Press, London, 2014), pp. 269-276. otwiera się w nowej karcie
  29. Y. Frostig, Composite Structures 24, pp. 161-169 (1993). otwiera się w nowej karcie
  30. O. T. Thomsen and Y. Frostig, Composite Structures 37(1), pp. 97-108 (1997). otwiera się w nowej karcie
  31. M. Bischoff and E. Ramm, International Journal of Solids and Structures 37, pp. 6933-6960 (2000). otwiera się w nowej karcie
  32. L. Librescu and T. Hause, Composite Structures 48(1-3), pp. 1-17 (2000). otwiera się w nowej karcie
  33. I. Kreja, Central European Journal of Engineering 1(1), pp. 59-80 (2011). otwiera się w nowej karcie
  34. S. J. Salami, M. Sadighi and M. Shakeri, Journal of Sandwich Structures and Materials 16(6), pp. 633-668 (2014). otwiera się w nowej karcie
  35. L. L. Mercado and D. L. Sikarskie, Mechanics of Composite Materials and Structures 6, pp. 57-67 (1999). otwiera się w nowej karcie
  36. Ł. Smakosz and I. Kreja, "Experimental and numerical evaluation of mechanical behaviour of composite structural insulated wall panels under edgewise compression", Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, The 3rd Polish Congress of Mechanics & 21st International Conference on Computer Methods in Mechanics Proceedings, edited by M. Kleiber et al. (CRC Press, London, 2016), pp. 547-550. otwiera się w nowej karcie
  37. K. Winkelmann and J. Górski, Journal of Theoretical and Applied Mechanics 52(4), pp. 1019-1032 (2014). otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

wyświetlono 115 razy

Publikacje, które mogą cię zainteresować

Meta Tagi