Wyszukiwarka
Influence of Giant Reed (Arundo Donax L.) Culms Processing Procedure on Physicochemical, Rheological, and Thermomechanical Properties of Polyethylene Composites
Abstrakt
Giant reed (Arundo donax L.) is a plant species with a high growth rate and low requirements, which makes it particularly interesting for the production of different bioproducts, including natural fibers. This work assesses the use of fibers obtained from reed culms as reinforcement for a high-density polyethylene (HDPE) matrix. Two different lignocellulosic materials were used: i) shredded culms and ii) fibers obtained by culms processing, which have not been reported yet in literature as fillers for thermoplastic materials. A good stress transfer for the fibrous composites was observed, with significant increases in mechanical properties; composites with 20% fiber provided a tensile elastic modulus of almost 1900 MPa (78% increase versus neat HDPE) and a flexural one of 1500 MPa (100% increase), with an improvement of 15% in impact strength. On the other hand, composites with 20% shredded biomass increased by 50% the tensile elastic modulus (reaching 1560 MPa) and the flexural one (up to 1500 MPa), without significant changes in impact strength. The type of filler is more than its ratio; composites containing fibers resulted in a higher performance than the ones with shredded materials due to the higher aspect ratio of fibers.
Cytowania
-
3
CrossRef
-
0
Web of Science
-
3
Scopus
Autorzy (7)
-
Luis Suarez
-
Paul Hanna
-
Zaida Ortega
-
Mateusz Barczewski
-
Bronagh Millar
-
Eoin Cunningham
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1080/15440478.2023.2296909
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
Journal of Natural Fibers
nr 21,
strony 1 - 31,
ISSN: 1544-0478 - Język:
- angielski
- Rok wydania:
- 2024
- Opis bibliograficzny:
- Suarez L., Hanna P., Ortega Z., Barczewski M., Kosmela P., Millar B., Cunningham E.: Influence of Giant Reed (Arundo Donax L.) Culms Processing Procedure on Physicochemical, Rheological, and Thermomechanical Properties of Polyethylene Composites// Journal of Natural Fibers -, (2024),
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1080/15440478.2023.2296909
- Źródła finansowania:
-
- Publikacja bezkosztowa
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 75 razy
Publikacje, które mogą cię zainteresować
Giant Reed (Arundo donax L.) Fiber Extraction and Characterization for Its Use in Polymer Composites
- L. Suárez,
- M. Barczewski,
- P. Kosmela
- + 1 autorów
Experimental and Numerical Study on Mechanical Characteristics of Aluminum/Glass Fiber Composite Laminates
- M. E. Golmakani,
- T. Wiczenbach,
- M. Malikan
- + 3 autorów