Wyszukiwarka
Abstrakt
Lignin-based carbon fibers (LCFs) from the renewable resource softwood kraft lignin were synthesized via oxidative thermostabilization of pure melt-spun lignin and carbonization at different temperatures from 1000°C to 1700°C. The resulting LCFs were characterized by tensile testing, scanning electron microscopy (SEM), X-ray diffraction (XRD) and confocal Raman spectroscopy. The microstructure is mainly amorphous carbon with some nanocrystalline domains. The strength and stiffness are inversely proportional to the carbonization temperature, while the LCFs carbonized at 1000°C exhibit a strength of 628 MPa and a stiffness of 37 GPa. Furthermore, the application potential of LCFs was evaluated as negative electrodes in a lithium-ion battery (LIB) by electrochemical cycling at different current rates in a half-cell setup. The capacity drops with the carbonization temperature and the LCFs carbonized at 1000°C have a capacity of 335 mAh g−1. All LCFs showed good cycling stability. Because of the mechanical integrity and conductivity of the LCFs, there is no need to apply current collectors, conductive additives or binders. The advantage is an increased gravimetric energy density compared to graphite, which is the most common negative electrode material. LCFs show a promising multifunctional behavior, including good mechanical integrity, conductivity and an ability to intercalate lithium for LIBs.
Cytowania
-
5 6
CrossRef
-
0
Web of Science
-
6 0
Scopus
Autorzy (8)
-
Johan Hagberg
- Applied Electrochemistry Department of Chemical Engineering, KTH Royal Institute of Technology
-
Simon Leijonmarck
- Applied Electrochemistry Department of Chemical Engineering, KTH Royal Institute of Technology
-
Hannah Schweinebarth
- Innventia AB
-
Darren Baker
- Innventia AB
-
Anders Uhlin
- Innventia AB
-
Per Tomani
- Innventia AB
-
Göran Lindbergh
- Applied Electrochemistry Department of Chemical Engineering, KTH Royal Institute of Technology
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
- Copyright (2017 Walter de Gruyter GmbH, Berlin/Boston)
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuł w czasopiśmie wyróżnionym w JCR
- Opublikowano w:
-
HOLZFORSCHUNG
nr 72,
wydanie 2,
strony 81 - 90,
ISSN: 0018-3830 - Język:
- angielski
- Rok wydania:
- 2018
- Opis bibliograficzny:
- Nowak A., Hagberg J., Leijonmarck S., Schweinebarth H., Baker D., Uhlin A., Tomani P., Lindbergh G.: Lignin-based carbon fibers for renewable and multifunctional lithium-ion battery electrodes// HOLZFORSCHUNG. -Vol. 72, iss. 2 (2018), s.81-90
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1515/hf-2017-0044
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 190 razy
Publikacje, które mogą cię zainteresować
Mechanical, durability, depolluting and electrical properties of multifunctional mortars prepared with commercial or waste carbon-based fillers
- A. Mobili,
- A. Belli,
- C. Giosuè
- + 6 autorów
Silicon Oxycarbide (SiOC) Ceramic Materials as Anodes for Lithium Ion Batteries
- M. Wilamowska-Zawłocka,
- V. Pradeep,
- M. Graczyk-Zajac
- + 2 autorów
Tailoring of SiOC composition as a way to better performing anodes for Li-ion batteries
- M. Wilamowska-Zawłocka,
- V. Pradeep,
- M. Graczyk-Zajac
- + 2 autorów
Diatoms Biomass as a Joint Source of Biosilica and Carbon for Lithium-Ion Battery Anodes
- A. Nowak,
- M. Sprynskyy,
- I. Wojtczak
- + 5 autorów