Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography
Abstrakt
Paper presents investigation of fracture phenomenon in plain concrete and in concrete reinforced with both recycled steel fibers (RSF) and industrial steel fibers (ISF). The wedge splitting test (WST), which enables stable crack propagation for quasi-brittle materials, was carried out on 75 75 75 mm cube samples. Initially, fracture process zone development was investigated only on the surface of samples using Digital Image Correlation which is a non-destructive optical testing method. Furthermore, to anal- yse the 3D cracking phenomenon (formation, development, width, shape and curvature) X-ray micro computed tomography was used. Micro-CT images were taken during continuous deformation process - without unloading sample during scanning. X-ray micro-computed tomography was also used to visu- alise and characterise air voids and fibers (length, diameter and orientation) embedded in concrete. The mechanical properties of plain, RSF and ISF reinforced concrete in terms of compressive strength, tensile splitting strength, shrinkage, tensile and residual strength in 3-point bending were additionally described.
Cytowania
-
1 2 2
CrossRef
-
0
Web of Science
-
1 2 9
Scopus
Autorzy (2)
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
- otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuł w czasopiśmie wyróżnionym w JCR
- Opublikowano w:
-
CONSTRUCTION AND BUILDING MATERIALS
nr 183,
strony 283 - 299,
ISSN: 0950-0618 - Język:
- angielski
- Rok wydania:
- 2018
- Opis bibliograficzny:
- Skarżyński Ł., Suchorzewski J.: Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography// CONSTRUCTION AND BUILDING MATERIALS. -Vol. 183, (2018), s.283-299
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.conbuildmat.2018.06.182
- Bibliografia: test
-
- Z. Bažant, J. Planas, Fracture and Size Effect in Concrete and Other Quasi-Brittle Materials, CRC Press LLC, Boca Raton, 1997. otwiera się w nowej karcie
- G. Lilliu, J.G.M. van Mier, 3D lattice type fracture model for concrete, Eng. Fract. Mech. 70 (2003) 927-941. otwiera się w nowej karcie
- Ł. Skar _ zyń ski, M. Nitka, J. Tejchman, Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray lCT images of internal structure, Eng. Fract. Mech. 147 (2015) 13-35.
- A.-L. Hoang, E. Fehling, Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete, Constr. Build. Mater. 153 (2017) 790-806.
- J.-H. Lee, B. Cho, E. Choi, Flexural capacity of reinforced concrete with a consideration of concrete strength and fiber content, Constr. Build. Mater. 138 (2017) 222-231. otwiera się w nowej karcie
- D.-Y. Yoo, Y.-S. Yoo, N. Banthia, Flexural response od steel-fiber-reinforced concrete beams: effect of strength, fiber content and strain-rate, Cem. Concr. Compos. 64 (2015) 84-92. otwiera się w nowej karcie
- Z. Wu, C. Shi, W. Hi, L. Wu, Effects of steel fibres distribution on mechanical properties of ultra high performance concrete, Constr. Build. Mater. 103 (2016) 8-14. otwiera się w nowej karcie
- M.N. Soutsos, T.T. Le, A.P. Lampropoulos, Flexural performance of fibre reinforced concrete made with steel and synthetic fibers, Constr. Build. Mater. 36 (2012) 704-710. otwiera się w nowej karcie
- J.M. Yang, K.H. Min, H.O. Shin, Y.S. Yoon, Effect of steel and synthetic fibers on flexural behaviour of high strength concrete beams reinforced with FRP bars, Compos. B Eng. 43 (3) (2012) 1077-1086. otwiera się w nowej karcie
- A. Caggiano, S. Gambarelli, E. Martinelli, N. Nistricò, M. Pepe, Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete, Constr. Build. Mater. 125 (2016) 1035-1043. otwiera się w nowej karcie
- A. Mada, F. Minelli, G.A. Plizzari, Flexural behaviour of RC beams in fiber reinforced concrete, Compos. B Eng. 43 (2012) 2930-2937.
- A. Caggiano, H. Xargay, P. Folino, E. Martinelli, Experimental and numerical characterization of the bond behaviour of steel fibers recovered from waste tyres embedded in cementitious matrices, Cem. Concr. Compos. 62 (2015) 146-155. otwiera się w nowej karcie
- A. Caggiano, P. Folino, C. Lima, E. Martinelli, M. Pepe, On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fiber, Constr. Build. Mater. 147 (2017) 286-295. otwiera się w nowej karcie
- A. Caggiano, G. Etse, E. Martinelli, Interface model for fracture behaviour of Fiber Reinforced Concrete Composites (FRCCs): theoretical formulation and numerical implementation, Eur. J. Environ. Civ. Eng. 15 (9) (2011) 1339-1359. otwiera się w nowej karcie
- O. Sengul, Mechanical behaviour of concretes containing waste steel fibers recovered from scrap tyres, Constr. Build. Mater. 122 (2016) 649-658. otwiera się w nowej karcie
- M. Leone, G. Centonze, D. Colonna, F. Micelli, M.A. Aiello, Fiber-reinforced concrete with low content of recycled steel fiber: shear behaviour, Constr. Build. Mater. 161 (2018) 141-155. otwiera się w nowej karcie
- K.M. Nemati, Fracture analysis of concrete using scanning electron microscopy, Scanning 19 (1997) 426-430. otwiera się w nowej karcie
- R.V. Balendran, H.W. Pang, H.X. Wen, Use of scanning electron microscopy in concrete studies, Struct. Surv. 16 (1998) 146-153. otwiera się w nowej karcie
- S.H. Hadjab, M. Chabaat, J.F. Thimus, Use of Scanning Electron microscope and the non-local isotropic damage model to investigate fracture process zone in notched concrete beams, Exp. Mech. 47 (2007) 473-484. otwiera się w nowej karcie
- J. Bhargava, A. Rehnström, High speed photography for fracture studies of concrete, Cem. Concr. Res. 5 (1975) 239-248. otwiera się w nowej karcie
- J.A. Leendertz, Interferometric displacement measurement on scattering surfaces utilizing speckle effect, J. Phys. E: Sci. Instrum. 3 (1970) 214-218. otwiera się w nowej karcie
- P. Jacquot, J.M. Fournier, Interferometry in Speckle Light: Theory and Applications, Springer, Berlin, 2000. otwiera się w nowej karcie
- A. Maji, C. Ouyang, S.P. Shah, Fracture mechanisms of concrete based on acoustic emission, J. Mater. Res. 5 (1990) 206-217. otwiera się w nowej karcie
- H. Mihashi, N. Nomura, Correlation between characteristics of fracture process zone and tension-softening properties of concrete, Nucl. Eng. Des. 165 (1996) 359-376. otwiera się w nowej karcie
- A. Carpinteri, G. Lacidogna, Damage diagnostic in concrete and masonry structures by acoustic emission technique, Autom. Control Robot. 3 (2003) 755-764. otwiera się w nowej karcie
- K. Otsuka, H. Date, Fracture process zone in concrete tension specimen, Eng. Fract. Mech. 65 (2000) 111-131. otwiera się w nowej karcie
- H. Hadjab, Fracture process zone in concrete beams: experimental investigation and numerical modelling, in: Proceedings of the SEM Annual Conference, June 1-4, Albuquerque New Mexico USA, 2009.
- G. Nagy, T. Zhang, W. Franklin, E. Landis, E. Nagy, D. Keane, Volume and surface area distributions of cracks in concrete, in: C. Arcelli, L.P. Cordella, G.S. di Baja (Eds.), Visual Form 2001, vol. 2059, 2001, pp. 759-768. otwiera się w nowej karcie
- E. Landis, E. Nagy, D. Keane, Microstructure and fracture in three dimensions, Eng. Fract. Mech. 70 (2003) 911-925. otwiera się w nowej karcie
- M.A.B. Promentilla, T. Sugiyama, X-ray microtomography of mortars exposed to freezing-thawing action, J. Adv. Concr. Technol. 8 (2010) 97-111. otwiera się w nowej karcie
- Ł. Skar _ zyń ski, J. Tejchman, Experimental investigations of fracture by means of X-ray micro computed tomography, Strain (2015), https://doi.org/10.1111/ str.12168. otwiera się w nowej karcie
- S. Ri, M. Fujigaki, Y. Morimoto, Sampling Moiré method for accurate small deformation distribution, Measurement 50 (2010) 501-508. otwiera się w nowej karcie
- S. Ri, T. Muramatsu, M. Saka, K. Nanbara, D. Kobayashi, Accuracy of the sampling Moiré method and its application to deflection measurements of large-scale structures, Exp. Mech. 52 (2012) 331-340. otwiera się w nowej karcie
- D. Lecompte, A. Smits, S. Bossuyt, H. Sol, J. Vantomme, D. van Hemelrijck, A.M. Habraken, Quality assessment of speckle patterns for digital image correlation, Opti. Lasers Eng. 44 (2006) 1132-1145. otwiera się w nowej karcie
- G. Corr, M. Accardi, L. Graham-Brady, S. Shah, Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete, Eng. Fract. Mech. 74 (2007) 109-121. otwiera się w nowej karcie
- B. Pan, H. Xie, Z. Wang, K. Qian, Z. Wang, Study on subset size selection in digital image correlation for spackle patterns, Opt. Express 16 (2008) 7037- 7048. otwiera się w nowej karcie
- Z. Wu, H. Rong, J. Zheng, W. Dong, An experimental investigation on the FPZ properties in concrete using digital image correlation technique, Eng. Fract. Mech. 78 (2011) 2978-2990. otwiera się w nowej karcie
- S.Y. Alam, A. Loukili, F. Grondin, Monitoring size effect on crack opening in concrete by Digital Image Correlation, Eur. J. Environ. Civ. Eng. 16 (2012) 1-19. otwiera się w nowej karcie
- Ł. Skar _ zyń ski, J. Kozicki, J. Tejchman, Application of DIC technique to concrete - study on objectivity of measured surface displacements, Exp. Mech. 53 (2013) 1545-1559.
- O. Orell, J. Vuorinen, J. Jokinen, H. Kettunen, P. Hytönen, J. Turunen, M. Kanerva, Characterization of elastic constants of anisotropic composites in compression using digital image correlation, Compos. Struct. 185 (2018) 176-185. otwiera się w nowej karcie
- Y. Su, Z. Gao, Q. Zhang, S. Wu, Spatial uncertainity of measurement errors in digital image correlation, Opt. Lasers Eng. 110 (2018) 113-121. otwiera się w nowej karcie
- L.I. Farfán-Cabrera, J.B. Pascual-Francisco, E.A. Gallardo-Hernández, O. Susarrey-Huerta, Application of digital image correlation technique to evaluate creep degradation of sealing elastomers due to exposure to fluids, Polym. Test. 65 (2018) 134-141. otwiera się w nowej karcie
- M. Mehdikhani, M. Aravand, B. Sabuncuoglu, M.G. Callens, S.V. Lomov, L. Gorbatikh, Full-field strain measurements at the micro-scale in fiber- reinforced composites using digital image correlation, Compos. Struct. 140 (2016) 192-201. otwiera się w nowej karcie
- M. Hamrat, B. Boulekbache, M. Chemrouk, S. Amziane, Flexural cracking behaviour of normal strength, high strength and high strength fiber concrete beams using Digital Image Correlation technique, Constr. Build. Mater. 106 (2016) 678-692. otwiera się w nowej karcie
- Y.-R. Zhao, L. Wang, Z.-K. Lei, X.-F. Han, Y.-M. Xing, Experimental study on dynamic mechanical properties of the basalt fiber reinforced concrete after the freeze thaw based on the digital image correlation method, Constr. Build. Mater. 147 (2017) 194-202. otwiera się w nowej karcie
- E. Pauwels, D. Van Loo, P. Cornillie, L. Brabant, L. Van Hoorebeke, An exploratory study of contrast agents for soft tissue visualization by means of high resolution X-ray computed tomography imaging, J. Microsc. 250 (2013) 21-31. otwiera się w nowej karcie
- T.K. Sampath, P. Simic, R. Sendak, N. Draca, A.E. Bowe, S. O'Brien, S.C. Schiavi, J. M. McPherson, S. Vukicevic, Thyroid-stimulating hormone restores bone volume, microarchitecture, and strength in aged ovariectomized rats, J. Bone Miner. Res. 22 (2007) 849-859. otwiera się w nowej karcie
- D. Cantre, E. Herremans, P. Verboven, J. Ampofo-Asiama, B.M. Nicolai, Characterization of the 3-D microstructure of mango (Mangifera indica L. cv. Carabao) during ripening using X-ray computed microtomography, Innovative Food Sci. Emerg. Technol. 24 (2014) 28-39. otwiera się w nowej karcie
- H.S. Tuan, W. Hutmacher, Application of micro-CT and computation modeling in bone tissue engineering, Comput. Aided Des. 37 (2005) 1151-1161. otwiera się w nowej karcie
- D. Tilman, F. Pfeiffer, O. Bunk, Ch. Grunzweig, E. Hempel, S. Popescu, P. Vock, Ch. David, Toward clinical X-ray phase-contrast CT: demonstration of enhanced soft-tissue contrast in human specimen, Invest. Radiol. 45 (2010) 445-452.
- K.I. Ignatiev, W.K. Lee, K. Fezzaa, S.R. Stock, Phase contrast stereometry: fatigue crack mapping in three dimensions, Philos. Mag. 85 (2005) 3273-3300. otwiera się w nowej karcie
- T.J. Marrow, J.Y. Buffiere, P.J. Withers, G. Johnson, D. Engelberg, High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron, Int. J. Fatigue 26 (2004) 717-725. otwiera się w nowej karcie
- E.N. Landis, E.N. Nagy, D.T. Keane, Microtomographic measurements of internal damage in portland-cement-based composites, J. Aerosp. Eng. 10 (1997) 2-6. otwiera się w nowej karcie
- S. Lu, E.N. Landis, D.T. Keane, X-ray microtomographic studies of pore structure and permeability in Portland cement concrete, Mater. Struct. 39 (2006) 611- 620. otwiera się w nowej karcie
- N. Burlion, D. Bernard, D. Chen, X-ray microtomography: aplication to microstructure analysis of a cementitious material during leaching process, Cem. Concr. Res. 36 (2006) 346-357. otwiera się w nowej karcie
- B. Chevalier, Introduction of X-ray CT application in geotechnical engineering - theory and practice, Conf. Ser. Mater. Sci. Eng. 10 (2010), https://doi.org/ 10.1088/1757-899X/10/1/012089. otwiera się w nowej karcie
- P. Besuell, G. Viggiani, N. Lenoir, J. Desrues, M. Bornert, X-ray micro-CT for studying strain localization in clay rocks under triaxial compression, in: Advances in X-ray Tomography for Geomaterials, 2nd International Workshop on X-Ray CT for Geomaterials, 2006, pp. 35-52. otwiera się w nowej karcie
- F. Prade, F. Schaff, S. Senck, P. Meyer, J. Mohr, J. Kastner, F. Pfeiffer, Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography, NDT and E Int. 86 (2017) 65-72. otwiera się w nowej karcie
- R. Wang, X. Gao, J. Zhang, G. Han, Spatial distribution of steel fibers and air bubbles in UHPC cylinder determined by X-ray CT method, Constr. Build. Mater. 160 (2018) 39-47. otwiera się w nowej karcie
- T. Ponikiewski, J. Katzer, M. Bugdol, M. Rudzki, X-ray computed tomography harnessed to determine 3D spacing of steel fibers in self compacting (SCC) slabs, Constr. Build. Mater. 74 (2015) 102-208. otwiera się w nowej karcie
- G.L. Balázs, O. Czoboly, E. Lublóy, K. Kapitány, A. Barsi, Observation of steel fibres in concrete with Computed Tomography, Constr. Build. Mater. 140 (2017) 534-541. otwiera się w nowej karcie
- T. Ponikiewski, M. Gołaszewski, M. Rudzki, M. Bugdol, Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography, Arch. Civ. Eng. 2 (2015) 558-568 [xx] R. Wang, X. Gao, J. Zhang, G. Han, Spatial distribution of steel fibres and air bubbles in UHPC cylinder determined by X-ray CT method, Constr. Build. Mater. 160 (2018) 39-47.. otwiera się w nowej karcie
- B. Zhou, Y. Uchida, Influence of flowablity, casting time and framework geometry on fiber orientation and mechanical properties of UHPFRC, Cem. Concr. Res. 95 (2017) 164-177. otwiera się w nowej karcie
- T. Ponikiewski, J. Katzer, M. Bugdol, M. Rudzki, Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography, Constr. Build. Mater. 68 (2014) 333-340. otwiera się w nowej karcie
- Y. Akkaya, A. Peled, S.P. Shah, Parameters related to fiber length and processing in cementitious composites, Mater. Struct. 33 (1999) 515-524. otwiera się w nowej karcie
- EN 12390-2:2009 Testing Hardened Concrete -Part 2: Making and Curing Specimens for Strength Tests. otwiera się w nowej karcie
- EN 12390-3:2009 Testing Hardened Concrete -Part 3: Compressive Strength of Test Specimens. otwiera się w nowej karcie
- V.C. Li, A simplified micromechanical model of compressive strength of fiber- reinforced cementitious composites, Cem. Concr. Res. 14 (2) (1992) 131-141. otwiera się w nowej karcie
- EN 12390-6:2011 Testing Hardened Concrete -Part 6: Tensile Splitting Strength of Test Specimens. otwiera się w nowej karcie
- A.M. Neville, Properties of Concrete, John Wiley & Sons, 1996. otwiera się w nowej karcie
- Instrukcja ITB 194/98 Badanie cech mechanicznych betonu na próbkach wykonanych w formach (in polish). otwiera się w nowej karcie
- A. Dehghan, K. Peterson, A. Shvarzman, Recycled glass fiber reinforced polymer additions to Portland cement concrete, Constr. Build. Mater. 146 (2017) 238- 250. otwiera się w nowej karcie
- A. Noushini, K. Vessalas, G. Arabian, B. Samali, Drying shrinkage behaviour of fiber reinforced concrete incorporating polyvinyl alcohol fibers and fly ash, Adv. Civ. Eng. (2014). https://doi.org/10.1155.2014.836173. otwiera się w nowej karcie
- RILEM TC 162-TDF, Test and design methods for steel fiber reinforced concrete: bending test, Mater. Struct. 35 (2002) 579-582. otwiera się w nowej karcie
- EN 14651:2005+A1:2007 Test Method for Metallic Fiber Concrete. Measuring the Flexural Tensile Strength (limit of proportionality (LOP), residual). otwiera się w nowej karcie
- H.N. Linsbauer, E.K. Tschegg, Fracture energy determination of concrete with cube specimens, Zement und Beton 31 (1986) 38-40 (in german).
- S. Korte, V. Boel, W. De Corte, G. De Schutter, Static and fatigue fracture mechanics properties of self-compacting concrete using three-point bending tests and wedge splitting tests, Constr. Build. Mater. 57 (2014) 1-8. otwiera się w nowej karcie
- Y. Dai, D. Gruber, H. Harmuth, Determination of the behavior of MgO- refractories using multi-cycle wedge splitting test and digital image correlation, J. Eur. Ceram. Soc. 37 (15) (2017) 5035-5043. otwiera się w nowej karcie
- J. Suchorzewski, J. Tejchman, M. Nitka, Discrete element method simulations of fracture in concrete under uniaxial compression based on its internal structure, Int. J. Damage Mech. (2017), https://doi.org/10.1177/ 1056789517690915. otwiera się w nowej karcie
- Ł. Skar _ zyń ski, J. Tejchman, Modeling the effect of material composition on the tensile properties of concrete, in: Jaap Weerheijm (Ed.), Understanding the Tensile Properties of Concrete, vol. 48, Woodhead Publishing Limited, 2013, pp. 52-97.
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 207 razy