Structural optimization of microjet array cooling system - Publikacja - MOST Wiedzy

Wyszukiwarka

Structural optimization of microjet array cooling system

Abstrakt

The single phase heat transfer from an upward facing, horizontal copper surface to arrays of impinging water jets was experimentally investigated. Experimental configuration allows for a free-surface unconfined jets flow. Square nozzles 50 × 100 μm arranged in four different geometries were used. Additionally, for the set of two jets array geometry was varied by adjusting the nozzle to nozzle distance. The area averaged heat transfer coefficient was found to be a strong function of working fluid mass flux and array geometrical aspect ratio. The proposed correlation agreed with the experimental data within 30% error bounds Obtained database of experimental data with analytical correlation allows the rational design of microjet modules for various industrial applications.

Cytowania

  • 1 7

    CrossRef

  • 0

    Web of Science

  • 2 4

    Scopus

Cytuj jako

Pełna treść

pobierz publikację
pobrano 102 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuł w czasopiśmie wyróżnionym w JCR
Opublikowano w:
APPLIED THERMAL ENGINEERING nr 123, strony 103 - 110,
ISSN: 1359-4311
Język:
angielski
Rok wydania:
2017
Opis bibliograficzny:
Muszyński T., Mikielewicz D.: Structural optimization of microjet array cooling system// APPLIED THERMAL ENGINEERING. -Vol. 123, (2017), s.103-110
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.applthermaleng.2017.05.082
Bibliografia: test
  1. T. Muszynski, S.M. Koziel, Parametric study of fluid flow and heat transfer over louvered fins of air heat pump evaporator, Arch. Thermodyn. 37 (2016) 45-62. doi:10.1515/aoter-2016-0019. otwiera się w nowej karcie
  2. P. Smakulski, S. Pietrowicz, A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques, Appl. Therm. Eng. 104 (2016) 636-646. doi:10.1016/j.applthermaleng.2016.05.096. otwiera się w nowej karcie
  3. Z. Meng, Z. Meng, W. Lu, Z. Zhu, Y. Sun, Research on heat exchange and control method of the evaporative condenser in the equipment of flax fiber modification, Appl. Therm. Eng. 100 (2016) 595-601. doi:10.1016/j.applthermaleng.2016.02.011. otwiera się w nowej karcie
  4. R.S. Andhare, A. Shooshtari, S. V. Dessiatoun, M.M. Ohadi, Heat transfer and pressure drop characteristics of a flat plate manifold microchannel heat exchanger in counter flow configuration, Appl. Therm. Eng. 96 (2016) 187-189. doi:10.1016/j.applthermaleng.2015.10.133. otwiera się w nowej karcie
  5. G.J. Michna, E.A. Browne, Y. Peles, M.K. Jensen, The effect of area ratio on microjet array heat transfer, Int. J. Heat Mass Transf. 54 (2011) 1782-1790. doi:10.1016/j.ijheatmasstransfer.2010.12.038. otwiera się w nowej karcie
  6. T. Muszynski, D. Mikielewicz, Comparison of heat transfer characteristics in surface cooling with boiling microjets of water, ethanol and HFE7100, Appl. Therm. Eng. 93 (2016) 1403-1409. doi:10.1016/j.applthermaleng.2015.08.107. otwiera się w nowej karcie
  7. T. Muszynski, R. Andrzejczyk, Heat transfer characteristics of hybrid microjet - Microchannel cooling module, Appl. Therm. Eng. 93 (2016) 1360-1366. doi:10.1016/j.applthermaleng.2015.08.085. otwiera się w nowej karcie
  8. A. Husain, M. Ariz, N.Z.H. Al-Rawahi, M.Z. Ansari, Thermal performance analysis of a hybrid micro-channel, -pillar and -jet impingement heat sink, Appl. Therm. Eng. 102 (2016) 989-1000. doi:10.1016/j.applthermaleng.2016.03.048. otwiera się w nowej karcie
  9. C.Y. Li, S. V. Garimella, Prandtl-number effects and generalized correlations for confined and submerged jet impingement, Int. J. Heat Mass Transf. 44 (2001) 3471- 3480. doi:10.1016/S0017-9310(01)00003-5. otwiera się w nowej karcie
  10. L. Qiu, S. Dubey, F.H. Choo, F. Duan, The jet impingement boiling heat transfer with ad hoc wall thermal boundary conditions, Appl. Therm. Eng. 108 (2016) 456-465. doi:10.1016/j.applthermaleng.2016.07.134. otwiera się w nowej karcie
  11. R. Andrzejczyk, T. Muszynski, C. Alberto Dorao, Experimental investigations on adiabatic frictional pressure drops of R134a during flow in 5mm diameter channel, Exp. Therm. Fluid Sci. 83 (2017) 78-87. doi:10.1016/j.expthermflusci.2016.12.016. otwiera się w nowej karcie
  12. L. Qiu, S. Dubey, F.H. Choo, F. Duan, Recent developments of jet impingement nucleate boiling, Int. J. Heat Mass Transf. 89 (2015) 42-58. doi:10.1016/j.ijheatmasstransfer.2015.05.025. otwiera się w nowej karcie
  13. E.A. Browne, G.J. Michna, M.K. Jensen, Y. Peles, Microjet array single-phase and flow boiling heat transfer with R134a, Int. J. Heat Mass Transf. 53 (2010) 5027-5034. doi:10.1016/j.ijheatmasstransfer.2010.07.062. otwiera się w nowej karcie
  14. B.P. Whelan, A.J. Robinson, Nozzle geometry effects in liquid jet array impingement, Appl. Therm. Eng. 29 (2009) 2211-2221. doi:10.1016/j.applthermaleng.2008.11.003. otwiera się w nowej karcie
  15. D.R.H. Gillespie, Z. Wang, P.T. Ireland, S.T. Kohler, Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry, J. Turbomach. 120 (1998) 92-99. otwiera się w nowej karcie
  16. T. Muszynski, R. Andrzejczyk, Applicability of arrays of microjet heat transfer correlations to design compact heat exchangers, Appl. Therm. Eng. 100 (2016) 105- 113. doi:10.1016/j.applthermaleng.2016.01.120. otwiera się w nowej karcie
  17. T. Muszynski, Design And Experimental Investigations Of A Cylindrical Microjet Heat Exchanger For Waste Heat Recovery Systems, Appl. Therm. Eng. (2017). doi:10.1016/j.applthermaleng.2017.01.021. otwiera się w nowej karcie
  18. N. Tran, Y.-J. Chang, J.-T. Teng, R. Greif, Enhancement heat transfer rate per unit volume of microchannel heat exchanger by using a novel multi-nozzle structure on cool side, Int. J. Heat Mass Transf. 109 (2017) 1031-1043. doi:10.1016/j.ijheatmasstransfer.2017.02.058. otwiera się w nowej karcie
  19. N. Karwa, C. Stanley, H. Intwala, G. Rosengarten, Development of a low thermal resistance water jet cooled heat sink for thermoelectric refrigerators, Appl. Therm. Eng. 111 (2017) 1596-1602. doi:10.1016/j.applthermaleng.2016.06.118. otwiera się w nowej karcie
  20. B.N. Taylor, C.E. Kuyatt, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, (n.d.). otwiera się w nowej karcie
  21. D. Mikielewicz, T. Muszynski, Comparison of Heat Transfer Characteristics in Surface Cooling With Boiling Microjets of Water , Ethanol and, in: Janusz T. Cieśliński (Ed.), XXI Int. Symp. Reserch-Education-Technology, Gdansk University of Technology, 2013: pp. 1-9.
  22. E.W. Lemmon, M.L. Huber, M.O. McLinden, NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties (REFPROP), Version 9.0, Phys. Chem. Prop. …. (2010).
Weryfikacja:
Politechnika Gdańska

wyświetlono 105 razy

Publikacje, które mogą cię zainteresować

Meta Tagi