Publikacje
Filtry
wszystkich: 500
Katalog Publikacji
-
Planning, Configuration and Usefulness of Microseismic Monitoring on Eastern-Europe Platform – Example from East Pomerania
PublikacjaThe microseismic monitoring is a method of monitoring of fracture propagation during hydraulic fracturing process. The method uses array of geophones to localize micro tremors induced by liquid pumped underground at high rate and pressure. The acquired information helps to optimize fracturing process and prevents fracture growth to aquifer levels. It proved to be useful on several unconventional hydrocarbon reservoirs in the USA....
-
Study on polymer elements for mitigation of earthquake-induced pounding between buildings in complex arrangements
PublikacjaPounding between neighbouring buildings during earthquakes has been identified as one of the reasons for substantial damage or even total collapse of colliding structures, so it has been the subject of numerous studies in the recent years. A major reason leading to interactions between adjacent, insufficiently separated structures results from the differences in their dynamic properties. The problem is much more complicated for...
-
Timber Frame Houses with Different Insulation Materials - Seismic Analysis
PublikacjaThe aim of this article is to present results of a dynamic numerical analysis focused on the response of two timber frame building structures exposed to seismic excitations. The first structure was insulated with mineral wool, while the second one with polyurethane foam. Specifications and technology involved in the models' construction are based on the previously conducted experimental study, upon which numerical structural models...
-
Modal analysis of temporary steel grandstand equipped with different bracing systems
PublikacjaThe aim of this paper is to present the results of numerical analysis focused on temporary steel scaffolding grandstand. The investigation has been devoted to modal analysis where modes of free vibrations and corresponding natural frequencies have been estimated and compared. The structure was equipped with different types of stiffener members. One on them is a typical tubular stiffener, while the second one is spe-cially designed...
-
Improving the accuracy of subgridding scheme in finite differences method based on Legendre polynomials expansion
PublikacjaIn this article the Legendre polynomials have been used to interpolate the field at the boundary of the meshes of different densities. The numerical verification of the proposed technique has been carried out in frequency domain. It has been shown that the accuracy of the presented method is very high and stable - the error monotonically decreases as a function of the refinement factor.
-
A diplexer design method using an augmented channel filter approach
PublikacjaContinuous development in RFID andmicrocontrollers technologies gives new possibilities to createsystems that are able to integrate a lot of sensors based ondifferent technologies. This integration brings us closer to realizethe Ubiquitous Network Society vision. However, many problemsmust be addressed before we will benefit from such systems. Inthis paper we describe concept of integrating RFID technologywith other sensors technologies...
-
Jacobi and gauss-seidel preconditioned complex conjugate gradient method with GPU acceleration for finite element method
PublikacjaIn this paper two implementations of iterative solvers for solving complex symmetric and sparse systems resulting from finite element method applied to wave equation are discussed. The problem under investigation is a dielectric resonator antenna (DRA) discretized by FEM with vector elements of the second order (LT/QN). The solvers use the preconditioned conjugate gradient (pcg) method implemented on Graphics Processing Unit (GPU)...
-
Linear viscoelastic modelling of damage-involved structural pounding during earthquakes
PublikacjaDamage-involved structural pounding during earthquakes has been recently intensively studied using different impact force models. The results of the previous studies indicate that the linear viscoelastic model is relatively simple yet accurate in modelling pounding-involved behaviour of structures during earthquakes. The only shortcoming of the model is a negative value of the pounding force occurring just before separation, which...
-
Experimental study on the behaviour of steel columns under seismic-induced axial impact load
PublikacjaIt has been observed during major earthquakes that the so called soft-storey failure of an upper floor of a structure results in large impact load acting on structural members of the lower storeys. It may further lead to progressive collapse of the whole structure substantially intensifying human and material losses. Therefore, the aim of this paper is to investigate experimentally the behaviour of columns under bending (observed...
-
How do sterols determine the antufungal activitiy of amphotericin B? Free energy of binding between the drug and its membrane targets.
PublikacjaAmphotericin B (AmB) is a well-known polyene antibiotic used to treat systemic fungal infections. It is commonly accepted that the presence of sterols in the membrane is essential for the AmB biological activity, that is, for the formation of transmembrane ion channels. The selective toxicity of AmB for fungal cells is attributed to the fact that it is more potent against fungal cell membranes containing ergosterol than against...
-
Shaking table experimental study on the effectiveness of polymer bearings for seismic isolation of structures
PublikacjaSeismic isolation has been recognised to be a very effective way of protecting structures from damage during earthquakes. It allows us to extend the natural period of the structure and therefore avoid resonance with the ground motion. Moreover, by increasing damping in the isolation devices, more energy can be dissipated and thus the structural response can be further reduced. The aim of this paper is to show the results of the...
-
Boundary value problems with advanced arguments involving upper and lower solutions in reverse order
PublikacjaPraca dotyczy problemów brzegowych dla równań różniczkowo-całkowych pierwszego rzędu z argumentami wyprzedzonymi. Podano wystarczające warunki, dla których problemy dotyczące takich równań mają rozwiązania minimalne i maksymalne w odpowiadającym obszarze ograniczonym przez rozwiązania górne i dolne. W celu uzyskania wyników zastosowano nową metodę opartą na twierdzeniu Heikkila-Lakshmikantham'a. Wyniki zilustrowano na przykładzie.
-
Eksperymentalne badania polimerów do elementów wibroizolacji sejsmicznej
PublikacjaCelem niniejszego artykułu jest weryfikacja doświadczalna możliwości zastosowania polimerów do elementów wibroizolacji sejsmicznej. Własności dynamiczne zastosowanego materiału zbadano na podstawie wyników badań wstępnych poddając dynamicznemu ściskaniu i rozciąganiu elementy wykonane z masy polimerowej. Dalsze badania wykonano na stole sejsmicznym poddając wymuszeniom sejsmicznym model konstrukcji wieżowej z wibroizolacją oraz...
-
Doświadczalne badania smukłych słupów poddanych deformacji i obciążeniom uderzeniowym podczas trzęsień ziemi
PublikacjaCelem niniejszego artykułu jest przedstawienie wyników badań doświadczalnych dotyczących zachowania się modeli słupów smukłych pod wpływem pionowego obciążenia uderzeniowego przy wstępnej deformacji na skutek poziomego przemieszczenia podpór w czasie trzęsień ziemi. Podczas badań eksperymentalnych, na górną część zdeformowanych prętów stalowych zrzucano kule wykonane z plasteliny. Wyniki badań pokazują, iż wraz ze wzrostem relatywnego...
-
Nieliniowe modelowanie odpowiedzi odłącznika wysokiego napięcia SGF 123 podczas trzęsienia ziemi
PublikacjaSprawność elementów sieci energetycznej, w tym odłączników wysokiego napięcia, jest istotnym elementem zapewnienia bezpieczeństwa na terenie dotkniętym trzęsieniem ziemi. W niniejszym artykule analizie sejsmicznej poddano model odłącznika dwukolumnowego obrotowego SGF 123 produkowany w Polsce. W pierwszym etapie wykonano analizę modalną celem weryfikacji modelu numerycznego. Następnie przeprowadzono szczegółową analizę dynamiczną...
-
Analiza numeryczna zachowania się odłącznika wysokiego napięcia SGF 245 poddanego obciążeniom sejsmicznym
PublikacjaPrzedstawiono wyniki analizy numerycznej zachowania się odłącznika wysokiego napięcia SGF 245 podczas trzęsienia ziemi. W analizie zastosowano model odłącznika zaimplementowany w programie MES. W pierwszym etapie wykonano analizę modalną w celu weryfikacji dokładności modelu numerycznego. Następnie przeprowadzono dokładną nieliniową analizę dynamiczną przy wystąpieniu wymuszenia opisanego składową NS trzęsienia ziemi El Centro...
-
Pounding-involved response of isolated and non-isolated buildings under earthquake excitation
PublikacjaCelem artykułu jest dokładna analiza zachowania się kolidujących ze sobą dwóch budynków z wibroizolacją i bez wibroizolacji poddanych obciążeniom dynamicznym podczas trzęsień ziemi. W analizie rozważno przypadki kiedy oba budynki mają wibroizolację, kiedy tylko jeden budynek ma wibroizolację oraz kiedy żaden z budynków nie ma wibroizolacji. Wyniki badań pokazują, iż budynki z wibroizolacją są bardziej podatne na zderzenia podczas...
-
WPŁYW ZDERZAKÓW NA ODPOWIEDŹ ZDERZAJĄCYCH SIĘ KONSTRUKCJI STALOWYCH PODDANYCH OBCIĄŻENIOM SEJSMICZNYM
PublikacjaTrzęsienia ziemi są jednymi z najbardziej nieprzewidywalnych obciążeń jakie mogą oddziaływać na konstrukcje budowlane. Szczególnie wrażliwe na te obciążenia są konstrukcje blisko sąsiadujące ze sobą, które pod wpływem obciążeń sejsmicznych mogą się ze sobą zderzać. Zjawisko zderzeń, które może prowadzić do znacznych zniszczeń, a nawet zawalenia się budynków, wynika głównie z niedostatecznej przerwy pomiędzy konstrukcjami oraz z...
-
A Task-Scheduling Approach for Efficient Sparse Symmetric Matrix-Vector Multiplication on a GPU
PublikacjaIn this paper, a task-scheduling approach to efficiently calculating sparse symmetric matrix-vector products and designed to run on Graphics Processing Units (GPUs) is presented. The main premise is that, for many sparse symmetric matrices occurring in common applications, it is possible to obtain significant reductions in memory usage and improvements in performance when the matrix is prepared in certain ways prior to computation....
-
Earthquake–induced pounding on response of adjacent structures in series: experimental and numerical study
PublikacjaPounding between structures in series during earthquakes may cause serious damage in the structur-al elements. The aim of this paper is to show the results of an experimental and numerical study that is focused on pounding between more than two structures which may be called "structures in series". In this study, the shaking table experiments, as well as the numerical analyses, were performed using three tower models including...
-
Ocena efektywności modelu matematycznego do opisu nieliniowego zachowania wibroizolacji sejsmicznej w postaci łożysk polimerowych
PublikacjaW pracy została dokonana ocena efektywności modelu matematycznego, opisującego nieliniowe zachowanie prototypu wibroizolacji sejsmicznej w postaci łożysk polimerowych. Do budowy łożysk polimerowych został wykorzystany elastomer poliuretanowy, który charakteryzuje się dobrymi właściwościami tłumiącymi. Wyniki badań materiałowych przeprowadzonych dla analizowanego polimeru zostały przedstawione we wcześniejszych publikacjach. W zaproponowanym...
-
Degradacja sztywności słupów budynku na skutek działania pionowego obciążenia uderzeniowego w czasie wstrząsów sejsmicznych
PublikacjaCelem niniejszego artykułu jest przedstawienie wyników badań dotyczących zachowania się słupów budynku poddanych deformacji poziomej (skutek działania sił sejsmicznych) oraz jednocześnie pionowemu obciążeniu uderzeniowemu (skutek awarii tzw. słabego piętra) podczas wstrząsów sejsmicznych. Wyniki badań pokazują, iż degradacja sztywności słupów na skutek działania obciążenia uderzeniowego może mieć zasadnicze znaczenie prowadząc...
-
Earthquake-induced pounding between superstructure segments of isolated bridge
PublikacjaThe use of seismic isolation in bridges is considered as one of the most promising advanced technologies to enhance the structural safety during earthquakes. However, the method results in larger displacements of superstructure segments increasing the probability of pounding between them. Reports after severe ground motions show that the earthquake-induced structural pounding may lead to significant damage in isolated bridges....
-
VIBRATION PROBLEMS OF AN EXAMPLE OF TEMPORARY STEEL GRANDSTAND UNDER HUMAN-INDUCED EXCITATION
PublikacjaLighter and slender structural members of a typical grandstand leads to a significant reduction in the frequencies, that is why such structures are more easily induced to vibrations. The aim of the present paper is to show the results of our experimental studies and the numerical analyses, focused on the behaviour of a part of a typical temporary steel grandstand under dynamic loads. The peak values of accelerations of a steel...
-
Systems of boundary value problems of advanced differential equations
PublikacjaThis paper considers the existence of extremal solutions to systems of advanced differential equations with corresponding nonlinear boundary conditions. The monotone iterative method is applied to obtain the existence results. An example is provided for illustration.
-
REVERSE MODELLING OF MICROSEISMIC WAVES PROPAGATION FOR THE INTERPRETATION OF THE DATA FROM HYDRAULIC FRACTURING MONITORING IN POLAND
PublikacjaA hydraulic fracturing job was performed to stimulate gas flow from a horizontal wellbore located in Poland. The whole operation was overseen by means of microseismic monitoring. For this purpose, an array of 12000 geophones was deployed on ground in form of patches distributed unevenly in a region of 4km from the wellbore. The array was constantly recording seismic signals during whole fracturing processed. Such recorded signals...
-
MICROSEISMIC EVENT DETECTION USING DIFFERENT ALGORITHMS ON REAL DATA FROM PATCH ARRAY GEOPHONE GRID FROM EASTERN POMERANIA FRACTURING JOB
PublikacjaThe microseismic monitoring is a method of monitoring of fracture propagation during hydraulic fracturing process. Hydraulic fracturing is a method of reservoir stimulation used especially for unconventional gas recovery. A matrix of several thousand geophones is placed on the surface of earth to record every little tremor of ground induced by fracturing process. Afterwards, the signal is analysed and the place of tremor occurrence...
-
MATCHED FILTER APPROACH FOR MICROSEISMIC SIGNAL PROCESSING OF REAL DATA FROM EAST POMERANIA SHALE GAS
PublikacjaThe microseismic monitoring is a method of monitoring of fracture propagation during hydraulic fracturing (HF)process. An array of several hundred geophones is placed on the surface to record little ground tremors induced by fracturing process. Filtration and summation of signals from geophones is essential to identify and locate fracturing events from underground. Authors propose a method of matched filtering, that is usually...
-
Badania eksperymentalne modelu zbiornika stalowego na stole sejsmicznym = Experimental study on steel tank model using shaking table
PublikacjaCylindrical steel tanks are very popular structures used for storage of products of chemical and petroleum industries. Their safety and reliability is really crucial because any failure may have serious consequences. Earthquakes are the most dangerous and also the most unpredictable dynamic loads acting on such structures. On the other hand, rockburst-induced ground motions are usually considered to be less severe due to lower...
-
Idea zastosowania sztucznej inteligencji w prognozowaniu wpływu drgań komunikacyjnych na odpowiedź dynamiczną budynków mieszkalnych
PublikacjaW poniższym artykule autorzy analizują wpływ drgań komunikacyjnych na budynki mieszkalne oraz metodykę pomiarową według PN-85 B-02170 [1]. Problemem badawczym jest opracowanie prostej metody prognozowania wpływu drgań na budynki mieszkalne w taki sposób, aby nie było konieczne przeprowadzanie pracochłonnych i kosztownych pomiarów polowych. W tym celu wykonano analizę przy użyciu algorytmów opartych na sztucznej inteligencji oraz...
-
Influence of separation gap on the structural response of colliding structures under earthquake excitation
PublikacjaThe high level of urbanization in the XXIst century forces the designers to design closely-separated structures and to take into account many factors influencing their response during seismic excitation, which are the most unpredictable loads which can affect civil engineering structures. Interactions between insufficiently adjacent buildings, known as the earthquake-induced structural pounding, may cause serious damage to the structures,...
-
Modeling of truss with cold-formed section and positive eccentricity in the node
PublikacjaThis work is dedicated to establishing the load carrying capacity of tensed and compressed truss’ nodes made of cold-formed open cross sections. The occurrence of bending in the truss’ nodes is the result of a specific production technology for system lattice girders assumed by the designer and the producer. The aim of this research is to present the methodology of conduct for creation of computational models that best depict the...
-
NUMERYCZNA ANALIZA ZACHOWANIA SIĘ KOLIDUJĄCYCH ZE SOBĄ BUDYNKÓW STALOWYCH PODDANYCH OBCIĄŻENIOM SEJSMICZNYM
PublikacjaCelem niniejszego artykułu jest przedstawienie wyników nieliniowej analizy numerycznej dotyczącej zachowania się dwóch budynków o konstrukcji stalowej zderzających się ze sobą w wyniku oddziaływań sejsmicznych. W badaniach uwzględniono wpływ efektu prędkości odkształcenia na zachowanie się budowli, co dotychczas nie było analizowane. Model numeryczny oraz analiza dynamiczna, dla składowej NS trzęsienia ziemi El Centro z 1940 roku,...
-
Badania właściwości elastomeru polimerowego jako materiału do redukcji drgań budowli poddanych obciążeniom sejsmicznym i parasejsmicznym
PublikacjaCelem niniejszej pracy jest przedstawienie wyników badań eksperymentalnych, przeprowadzonych na próbkach wykonanych z elastomeru polimerowego, wykorzystywanego w metodzie złączy podatnych. W referacie zaprezentowano wyniki badań statycznych dla ściskania oraz rozciągania, a także rezultaty z dynamiczno-mechanicznej analizy termicznej (DMA), której celem było przedstawienie zmian modułu zachowawczego, modułu stratności oraz tangensa...
-
Badania eksperymentalne modelu zbiornika stalowego poddanego wstrząsom górniczym i sejsmicznym
PublikacjaCelem niniejszego artykułu jest przedstawienie wyników badań eksperymentalnych dotyczących odporności na wstrząsy górnicze i trzęsieni ziemi konstrukcji stalowych zbiorników walcowych. Badania przeprowadzono na stole sejsmicznym poddając wymuszeniom dynamicznym model zbiornika przy różnym poziomie wypełnienia wodą. Wyniki badań pokazują, iż poziom wypełnienia ma istotny wpływ na zachowanie się zbiornika. Zauważono, iż wypełniania...
-
A memory efficient and fast sparse matrix vector product on a Gpu
PublikacjaThis paper proposes a new sparse matrix storage format which allows an efficient implementation of a sparse matrix vector product on a Fermi Graphics Processing Unit (GPU). Unlike previous formats it has both low memory footprint and good throughput. The new format, which we call Sliced ELLR-T has been designed specifically for accelerating the iterative solution of a large sparse and complex-valued system of linear equations arising...
-
Non-linear behaviour of base-isolated building supported on flexible soil under damaging earthquakes
PublikacjaSeismic isolation is a strategy to reduce damage of structures exposed to devastating earthquake excitations. Isolation systems, applied at the base of buildings, lower the fundamental frequency of the structure below the range of dominant frequencies of the ground motion as well as allow to dissipate more energy during structural vibrations. The effectiveness of the base-isolated buildings in damage reduction has been confirmed...
-
Positive solutions to boundary value problems for impulsive second-order differential equations
PublikacjaIn this paper, we discuss four-point boundary value problems for impulsive second-order differential equations. We apply the Krasnoselskii's fixed point theorem to obtain sufficient conditions under which the impulsive second-order differential equations have positive solutions. An example is added to illustrate theoretical results.
-
Shaking table experimental study on damage mechanism of the disconnecting switch under seismic excitation
PublikacjaThe efficiency of the energetic network is a very import safety issue in the region experienced by the earthquake. High voltage disconnecting switches are important elements of the energetic infrastructure used to separate electric circuits (i.e. during repairs), which should not be damaged remaining fully operational. The aim of the paper is to show the results of the shaking table experimental investigation focused on damage...
-
Experimental study on polymer mass used to repair damaged structures
PublikacjaA new method of repairing damaged structures by injecting the cracks with specially designed polymer mass (flexible two-component grout based on polyurethane resin) has been recently proposed. The technique is mainly dedicated to damaged masonries, especially historical structures where minimum intervention is permitted. The cracks are filled with the special injection, forming the flexible joints bonding the disrupted structural...
-
On neutral differential equations and the monotone iterative method
PublikacjaThe application of the monotone iterative method to neutral differential equations with deviating arguments is considered in this paper. We formulate existence results giving sufficient conditions which guarantee that such problems have solutions. This approach is new and to the Authors' knowledge, this is the first paper when the monotone iterative method is applied to neutral first-order differential equations with deviating...
-
Experimental study on static and dynamic properties of polymer mass
PublikacjaA new method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure. The aim of the...
-
Statyczne i dynamiczne badania własności masy polimerowej
PublikacjaPolimer jest materiałem, który coraz częściej znajduje zastosowanie w budownictwie w przypadku konstrukcji narażonych na wpływy dynamiczne. Poprzez dodanie do składu polimeru odpowiednich składników możliwe jest otrzymanie materiału o specjalnych parametrach, np. o zwiększonym tłumieniu. Od kilku lat masa polimerowa stosowana jest w tzw. metodzie złączy podatnych. Potwierdzono również jej efektywność w zastosowaniu do elementów...
-
Badania polowe i analiza modalna trybuny stalowej
PublikacjaNiegdyś trybuny stalowe wykorzystywane były tylko podczas wydarzeń sportowych. Dzięki swoim zaletom dziś spotkać możemy je podczas koncertów muzycznych, wystaw, festiwali, gdzie dużej liczbie ludzi towarzyszy głośna muzyka. Użycie lekkich i smukłych elementów konstrukcyjnych, które wraz z nieprzewidywalnym zachowanie się tłumu oraz głośną muzyką przyczyniają się do niskich wartości częstotliwości drgań przez co łatwiej wzbudzają...
-
Numerical study on seismic response of a base-isolated building modelled with shell elements
PublikacjaSeismic isolation is counted among the most popular and effective means of protecting structures against earthquake forces. Base isolators, like Lead-Rubber Bearings (LRB), High-Damping Rubber Bearings (HDB) or Friction Pendulum Systems (FPS) are extensively used in practice in many earthquake-prone regions of the world. The present paper reports the results obtained from the numerical study on seismic response of a base-isolated...
-
Badania eksperymentalne zderzeń pomiędzy wieżami w szeregu poddanymi wymuszeniu sejsmicznemu
PublikacjaIstotnym problemem podczas projektowania elementów, bądź całych konstrukcji, poddanych obciążeniom dynamicznym (takim jak wybuch, uderzenie pojazdem, trzęsienie ziemi) jest ich bezpieczeństwo oraz podatność. Rodzaj obciążenia determinuje zachowanie się konstrukcji. Należy pamiętać, iż obciążenie quasi-statyczne czy statyczne wywoła inna odpowiedź w stosunku do działającego obciążenia dynamicznego. Zjawisko uderzenia jest więc problemem...
-
Response of a steel tank during earthquakes and mining tremors - experimental investigation
PublikacjaCylindrical steel tanks are very popular shell structures used to store the products of chemical and petroleum industries. Any failure might have disastrous consequences, therefore their safety and reliability is essential. Earthquakes are the most dangerous and also the most unpredictable dynamic loads acting on such structures. On the other hand, mining tremors are usually considered to be less severe due to lower acceleration...
-
Generalized Chebyshev Bandpass Filters With Frequency-Dependent Couplings Based on Stubs
PublikacjaThis paper presents an accurate synthesis method for inline and cross-coupled generalized Chebyshev bandpass filters with frequency-dependent couplings implemented via open and short stubs. The technique involves the synthesis of a lumped-element prototy pe in the form of a coupling matrix with a frequency-dependent term and the conversion of this prototype to a distributed-element mode l composed of sections of TEM lines. This...
-
Analiza dynamiczna trybuny stalowej
PublikacjaW powyższej pracy przedstawione zostały zalety stosowania trybun stalowych jako wyposażenia stadionów sportowych oraz innych miejsc, które gromadzą ogromną liczbę widzów. Pokazano, że konstrukcje te charakteryzują się wysoką estetyką i podnoszą prestiż widowiska w odróżnieniu do wcześniej stosowanych trybun żelbetowych. Z uwagi na zastosowanie lekkich i smukłych elementów składowych konstrukcji trybuny, masa widzów oraz obciążenia...
-
Non-linear strain rate analysis of earthquake-induced pounding between steel buildings
PublikacjaPast and recent earthquakes have shown that ground motions may cause severe structural damage to civil engineering structures. Earthquake-induced pounding between adjacent buildings has been identified as one of the reasons which intensifies damages. The aim of this paper is to show the results of the detailed nonlinear FEM analysis of earthquake-induced pounding between two steel buildings. The elastic – perfectly plastic material...