Wyszukiwarka
Szkoła Doktorska
Publikacje
Filtry
wszystkich: 500
Katalog Publikacji
Rok 2020
-
Novel MNZ-type microwave sensor for testing magnetodielectric materials
PublikacjaA novel microwave sensor with the mu-near-zero (MNZ) property is proposed for testing magnetodielectric material at 4.5 GHz. The sensor has a double-layer design consisting of a microstrip line and a metal strip with vias on layers 1 and 2, respectively. The proposed sensor can detect a unit change in relative permittivity and relative permeability with a difference in the operating frequency of 45 MHz and 78 MHz, respectively....
-
Numerical investigation on behaviour of cylindrical steel tanks during mining tremors and moderate earthquakes
PublikacjaCylindrical steel tanks are important components of industrial facilities. Their safety becomes a crucial issue since any failure may cause catastrophic consequences. The aim of the paper is to show the results of comprehensive FEM numerical investigation focused on the response of cylindrical steel tanks under mining tremors and moderate earthquakes. The effects of different levels of liquid filling, the influence of non-uniform...
-
Photosensitive and pH-dependent activity of pyrazine-functionalized carbazole derivative as promising antifungal and imaging agent
PublikacjaCarbazole skeleton plays a significant role as a structural scaffold of many pharmacologically active compounds. Pyrazine-functionalized carbazole derivative was constructed by coupling 2-amino-5-bromo-3-methylaminepyrazine (ABMAP) into 3 and 6 positions of the carbazole ring. Multi-experimental methods were used, e.g., potentiometric, spectroscopic (ATR, UV, XRD powder,1H and13C NMR), electrochemical (cyclic voltammetry), and...
Rok 2012
-
Numerical Analysis of a Steel Frame Building with Soft-storey Failure under Ground Motion Excitation
PublikacjaThe aim of this paper is to show the results of a numerical analysis focused on the behaviour of multi-storey steel frame building that suffers from a soft-storey failure under ground motion excitation. A numerical model of the structure was created in FEM computer software and was exposed to an impact that would have been generated after a soft-storey failure due to falling of the upper floors. During the analysis, the whole structure...
Rok 2014
-
Numerical analysis of a temporary steel grandstand
PublikacjaThe purpose of this paper is to present the results of the numerical analysis focused on the response of the temporary steel scaffolding grandstand subjected to human-induced vibrations due to jumping. Shell as well as beam elements have been used in the numerical model. Its first stage has involved conducting modal analysis in order to determine the modes of free vibrations and the corresponding natural frequencies for the empty...
-
Numerical study on seismic response of a base-isolated building modelled with shell elements
PublikacjaSeismic isolation is counted among the most popular and effective means of protecting structures against earthquake forces. Base isolators, like Lead-Rubber Bearings (LRB), High-Damping Rubber Bearings (HDB) or Friction Pendulum Systems (FPS) are extensively used in practice in many earthquake-prone regions of the world. The present paper reports the results obtained from the numerical study on seismic response of a base-isolated...
Rok 2022
-
Numerical analysis of CO2-water separation in a horizontal double T-junction
PublikacjaCarbon dioxide is considered one of the main factors leading to global warming. Considering the significant impacts of CO2 on climate change, various technologies have been developed in recent decades to control carbon emission, such as for example CO2 capture and storage. The developed cycle of a negative CO2 emission power plant includes some devices, out of which, separator plays an indispensable role. To this end, T-junction...
-
Numerical analysis of vacuum drying of a porous body in the integrated domain
Publikacjan the present study, the vacuum drying process of an apple slice is numerically modeled based on a control volume method. Transient two-dimensional Navier– Stokes, energy, moisture, and Luikov equations are solved by numerical coding (Fortran) to simulate the simultaneous heat and mass transfer in the ambient and apple slice, respectively. The privilege of using Luikov's model is that the capillary forces are considered, and a...
-
Optimal reshaping and stress controlling of double-layer spherical structures under vertical loadings
PublikacjaOptimal reshaping and stress controlling of double-layer spherical structures under vertical loadings
-
Organic solvents aggregating and shaping structural folding of protein, a case study of the protease enzyme
PublikacjaLow solubility of reactants or products in aqueous solutions can result in the enzymatic catalytic reactions that can occur in non-aqueous solutions. In current study we investigated aqueous solutions containing different organic solvents / deep eutectic solvents (DESs) that can influence the protease enzyme's activity, structural, and thermal stabilities. Retroviral aspartic protease enzyme is responsible for the cleavage of the...
-
Pounding between high-rise buildings with different structural arrangements
PublikacjaEarthquake-induced structural pounding has led to significant damages during previous earthquakes. This paper investigates the effect of pounding on the dynamic response of colliding high-rise buildings with different structural arrangements. Three 3-D buildings are considered in the study, including 5-storey building, 7-storey building and 9-storey building. Three pounding scenarios are also taken into account, i.e. pounding between...
Rok 2023
-
Numerical Analysis of Seismic Pounding between Adjacent Buildings Accounting for SSI
PublikacjaThe structural pounding caused by an earthquake may damage structures and lead to their collapse. This study is focused on the pounding between two adjacent asymmetric structures with different dynamic properties resting on the surface of an elastic half-space. An exploration of the relationship between the effects of the seismic analysis with the impact response to the torsional pounding between adjacent buildings under different...
-
Numerical simulation of cold flow and combustion in a swirl stabilized combustor
PublikacjaA numerical simulation model was developed to investigate the cold flow and combustion using Ansys FLUENT 2021R1. The governing equations were solved using the pressure-based method, and pressure–velocity coupling was performed using the SIMPLE method. To model the turbulent process, the RSM model was used. Non-premixed model is chosen to solve the chemical kinetics between fuel and oxigen. Radiation heat transfer was calculated...
-
Optimized Computational Intelligence Model for Estimating the Flexural Behavior of Composite Shear Walls
PublikacjaThis article presents a novel approach to estimate the flexural capacity of reinforced concrete-filled composite plate shear walls using an optimized computational intelligence model. The proposed model was developed and validated based on 47 laboratory data points and the Transit Search (TS) optimization algorithm. Using 80% of the experimental dataset, the optimized model was selected by determining the unknown coefficients of...
-
Optimum shapes and dimensions of rubber bumpers in order to reduce structural pounding during seismic excitations
PublikacjaLarge displacement of structures observed during seismic excitations may lead to collisions between two adjacent, insufficiently-separated buildings and may result in major damages of both of them. In many building codes, appropriate equations or approximately recommended distances between structures in order to avoid pounding hazard have been introduced. Unfortunately, further, more detailed considerations show that safety situation...
-
Pin-on-Substrate Gap Waveguide: An Extremely Low-Cost Realization of High-Performance Gap Waveguide Components
PublikacjaConsidering the limitations of currently available technologies for the realization of microwave components and antennas, a trade-off between different factors including the efficiency and fabrication cost is required. The main objective of this letter is to propose a novel method for the realization of gap waveguides (GWGs) that take advantage of conventional PCB fabrication technology, thus are low cost and light weight. Moreover,...
-
Predicting seismic response of SMRFs founded on different soil types using machine learning techniques
PublikacjaPredicting the Maximum Interstory Drift Ratio (M-IDR) of Steel Moment-Resisting Frames (SMRFs) is a useful tool for designers to approximately evaluate the vulnerability of SMRFs. This study aims to explore supervised Machine Learning (ML) algorithms to build a surrogate prediction model for SMRFs to reduce the need for complex modeling. For this purpose, twenty well-known ML algorithms implemented in Python software are trained...
Rok 2017
-
Numerical Evaluation of Dynamic Response of a Steel Structure Model under Various Seismic Excitations
PublikacjaThe present paper reports the results of the study, which was designed to perform a numerical evaluation of dynamic response of a single-storey steel structure model. The experimental model was previously subjected to a number of different earthquake ground motions during an extensive shaking table investigation. The analyzed structure model was considered as a 1-DOF system with lumped parameters, which were determined by conducting...
-
Numerical modal analysis of a vertical rising steel water gate
PublikacjaVertical rising steel water gates are very common not only in Poland and Germany but also in other countries of the world. Their popularity is mainly attributed to their simplicity of construction, which makes their production process cheaper and faster when compared to other solutions. The aim of this paper is to conduct a numerical modal analysis to examine the eigenvalues and eigenmodes of a vertical rising steel gate. Two cases...
-
Planning, Configuration and Usefulness of Microseismic Monitoring on Eastern-Europe Platform – Example from East Pomerania
PublikacjaThe microseismic monitoring is a method of monitoring of fracture propagation during hydraulic fracturing process. The method uses array of geophones to localize micro tremors induced by liquid pumped underground at high rate and pressure. The acquired information helps to optimize fracturing process and prevents fracture growth to aquifer levels. It proved to be useful on several unconventional hydrocarbon reservoirs in the USA....
-
Powierzchniowe badania mikrosejsmiczne na odwiercie w północnej Polsce, optymalizacja modelu prędkościowego
PublikacjaCelem wykonanych prac było potwierdzenie możliwości wykorzystania mikrosejsmicznego pomiaru powierzchniowego ze schematem rozłożenia typu patch array dla polskich warunków geologicznych. Artykuł zawiera opis przeprowadzonych prac mikrosejsmiki powierzchniowej wykonanych na odwiercie w północnej Polsce wraz z procedurą optymalizacji modelu prędkościowego.
Rok 2018
-
Numerical investigation on dynamic performance of a multi-storey steel structure model and comparison with experimental results
PublikacjaShaking table testing is the most commonly adopted method to simulate earthquake forces. This approach allows us to analyze the dynamic performance and provides a valuable insight into the dynamics of building structures, which helps to improve their future safety and reliability. The present study aims to conduct a numerical evaluation of dynamic response of a multi-storey steel structure model, which was previously examined during...
-
Numerical Investigation on Dynamic Performance of a Multi-storey Steel Structure Model and Comparison with Experimental Results
PublikacjaShaking table testing is the most commonly adopted method to simulate earthquake forces. This approach allows us to analyze the dynamic performance and provides a valuable insight into the dynamics of building structures, which helps to improve their future safety and reliability. The present study aims to conduct a numerical evaluation of dynamic response of a multi-storey steel structure model, which was previously examined during...
-
Parametrized Local Reduced-Order Models With Compressed Projection Basis for Fast Parameter-Dependent Finite-Element Analysis
PublikacjaThis paper proposes an automated parametric local model-order reduction scheme for the expedited design of microwave devices using the full-wave finite-element method (FEM). The approach proposed here results in parameterized reduced-order models (ROMs) that account for the geometry and material variation in the selected subregion of the structure. In each subregion, a parameter-dependent projection basis is generated by concatenating...
-
Polymeric Bearings as a new base isolation system suitable for mitigating machine-induced vibrations
PublikacjaThe present paper summarizes the preliminary results of the experimental shaking table investigation conducted in order to verify the effectiveness of a new base isolation system consisting of Polymeric Bearings in reducing strong horizontal machine-induced vibrations. Polymeric Bearing considered in the present study is a prototype base isolation system, which was constructed with the use of a specially prepared flexible polymer...
-
Preconditioners with Low Memory Requirements for Higher-Order Finite-Element Method Applied to Solving Maxwell’s Equations on Multicore CPUs and GPUs
PublikacjaThis paper discusses two fast implementations of the conjugate gradient iterative method using a hierarchical multilevel preconditioner to solve the complex-valued, sparse systems obtained using the higher order finite-element method applied to the solution of the time-harmonic Maxwell equations. In the first implementation, denoted PCG-V, a classical V-cycle is applied and the system of equations on the lowest level is solved...
Rok 2008
-
Numerical simulation of threshold-crossing problem for random fields of environmental contamination
PublikacjaCelem artykułu jest analiza szacowania prawdopodobieństwa, że pole losowe zanieczyszczeń nie przekracza pewnej wartości w danej dwuwymiarowej przestrzeni. W analizie wykorzystano metodę modelowania stochastycznego wykorzystując procedurę symulacji warunkowej. Opisany przykład praktycznego zastosowania metody dotyczy pola zanieczyszczenia metalami ciężkimi gruntu w regionie gdańskim.
-
Optimization of a FDTD code for graphical processing units
PublikacjaArtykuł prezetuje implementację algorytmu FDTD w postaci jawnej przeznaczonej dla kart graficznych. Wykazany został wzrost efektywności obliczeń numerycznych w odniesieniu do implementacji przeznaczonej dla procesora komputerowego.
Rok 2006
-
Numerical simulations of space-time conditional random fields of ground motions
PublikacjaArtykuł przedstawia metodę modelowania stochastycznego efektu propagacji fali sejsmicznej z wykorzystaniem przestrzenno-czasowej funkcji korelacji pola losowego trzęsienia ziemi. Metodę wykorzystano do generacji nieznanych historii czasowych trzęsienia w wybranych punktach na podstawie znanego rejestru w jednym miejscu. Wyniki pokazały, iż zastosowanie zaproponowanej metody prowadzi do relatywnie małych błędów symulacji.
-
Object oriented grid computing for computational electromagnetics
PublikacjaArtykuł opisuje bibliotekę WiCommGrid napisaną w języku java, która realizuje ideę wymiany informacji pomiędzy węzłami środowiska rozproszonego z zastosowaniem programowania zorientowanego obiektowo. Biblioteka ta przystosowana jest do współdziałania z wieloma systemami operacyjnymi oraz z rożnym środowiskiem sprzętowym. Zbudowaną aplikację zastosowano do zrównoleglonych obliczeń rozkładu pola elektromagnetycznego w oparciu o algorytm...
-
On integro-differential equations with delayed arguments
PublikacjaPraca dotyczy problemów różniczkowo-całkowych z warunkami początkowymi oraz brzegowymi typu okresowego. Podano warunki na istnienie i jednoznaczność rozwiązania. Badania dotyczyły również nierówności różniczkowo-całkowych z argumentami typu opóżnionego. Podano przykłady, które mogą mieć zastosowanie w problemach inżynierskich.
-
passive spice networks from non-passive data
PublikacjaArtykuł przestawia technike generacji schematow zastepczych w formacie SPICE dla pasywnych układów mikrofalowych. Wynikowy schemat zastepczy ma zagwarantowana pasywnosc. Schematy zastepcze powstaja na podstawie symulacji lub pomiarow w dziedzinie czestotliwosci i moga byc wykorzystane do symulacji w dziedzinie czasu.
-
Pounding force response spectrum under earthquake excitation
PublikacjaW artykule przedstawiono możliwość wykorzystania spektrum siły zderzenia jako zaproponowanego przez autora narzędzia pomocnego przy projektowaniu budynków narażonych na zderzenia podczas trzęsień ziemi. Przedstawione wykresy spektrów pokazały, iż właściwy dobór parametrów budowli, takich jak szerokość przerwy pomiędzy budynkami, okres drgań własnych konstrukcji, liczba tłumienia, masa, współczynnik ciągliwości, czy też przesunięcie...
Rok 2004
-
Numerical simulations of transverse pounding-involved response of buildings due to earthquake excitation.
PublikacjaCelem artykułu jest analiza (w kierunku poprzecznym) zachowania się uderzających o siebie budynków podczas trzęsienia ziemi. W analizie tej obie konstrukcje modelowane są przy użyciu dyskretnego, sprężysto-plastycznego modelu o skupionych masach, zaś do symulacji zderzeń zastosowano nieliniowy model lepko-sprężysty. Wyniki analizy pokazują, iż zderzanie prowadzi do znacznego wzrostu odpowiedzi w kierunku poprzecznym dla konstrukcji...
Rok 2016
-
Numerical study on pounding between two adjacent buildings under earthquake excitation
PublikacjaSeismic excitation, which results in large horizontal relative displacements, may cause collisions between two adjacent structures due to insufficient separation distance between them. Such collisions, known as earthquake-induced structural pounding, may induce severe damages. In this paper, the case of pounding between two adjacent buildings is studied by the application of single degree-of-freedom structural models. Impact is...
-
Pounding between Inelastic Three-Storey Buildings under Seismic Excitations
PublikacjaStructural interactions between adjacent, insufficiently separated buildings have been repeatedly observed during damaging ground motions. This phenomenon, known as the structural pounding, may result in substantial damage or even total collapse of structures. The aim of the present paper is to show the results of the nonlinear numerical analysis focused on pounding between inelastic three-storey buildings under seismic excitations....
Rok 2015
-
NUMERYCZNA ANALIZA ZACHOWANIA SIĘ KOLIDUJĄCYCH ZE SOBĄ BUDYNKÓW STALOWYCH PODDANYCH OBCIĄŻENIOM SEJSMICZNYM
PublikacjaCelem niniejszego artykułu jest przedstawienie wyników nieliniowej analizy numerycznej dotyczącej zachowania się dwóch budynków o konstrukcji stalowej zderzających się ze sobą w wyniku oddziaływań sejsmicznych. W badaniach uwzględniono wpływ efektu prędkości odkształcenia na zachowanie się budowli, co dotychczas nie było analizowane. Model numeryczny oraz analiza dynamiczna, dla składowej NS trzęsienia ziemi El Centro z 1940 roku,...
-
Ocena efektywności modelu matematycznego do opisu nieliniowego zachowania wibroizolacji sejsmicznej w postaci łożysk polimerowych
PublikacjaW pracy została dokonana ocena efektywności modelu matematycznego, opisującego nieliniowe zachowanie prototypu wibroizolacji sejsmicznej w postaci łożysk polimerowych. Do budowy łożysk polimerowych został wykorzystany elastomer poliuretanowy, który charakteryzuje się dobrymi właściwościami tłumiącymi. Wyniki badań materiałowych przeprowadzonych dla analizowanego polimeru zostały przedstawione we wcześniejszych publikacjach. W zaproponowanym...
-
Pounding Between Superstructure Segments in Multi-Supported Elevated Bridge with Three-Span Continuous Deck Under 3D Non-Uniform Earthquake Excitation
PublikacjaReports after severe ground motions show that the earthquake-induced structural pounding may lead to significant damage in elevated bridges. The aim of this paper is to analyse pounding between superstructure segments of a highway elevated bridge with three-span continuous deck under 3D non-uniform earthquake excitation, which is induced by spatial seismic effects related to the propagation of seismic wave. The conditional stochastic...
Rok 2011
-
On neutral differential equations and the monotone iterative method
PublikacjaThe application of the monotone iterative method to neutral differential equations with deviating arguments is considered in this paper. We formulate existence results giving sufficient conditions which guarantee that such problems have solutions. This approach is new and to the Authors' knowledge, this is the first paper when the monotone iterative method is applied to neutral first-order differential equations with deviating...
-
Positive solutions to boundary value problems for impulsive second-order differential equations
PublikacjaIn this paper, we discuss four-point boundary value problems for impulsive second-order differential equations. We apply the Krasnoselskii's fixed point theorem to obtain sufficient conditions under which the impulsive second-order differential equations have positive solutions. An example is added to illustrate theoretical results.
Rok 2009
-
On the Possibility of the Amphotericin B-Sterol Complex Formation in Cholesterol- and Ergosterol-Containing Lipid Bilayers: A Molecular Dynamics Study
PublikacjaAmphotericin B (AmB) is a well-known membrane-active antibiotic that has been used to treat systemicfungal infections for more than 45 years. Therapeutic application of AmB is based on the fact that it is moreactive against ergosterol-containing membranes of fungal cells than against mammalian membranes withcholesterol. In this paper, we examine the hypothesis according to which the selectivity of the AmB's membraneaction originates...
Rok 2010
-
On the synthesis of coupled-lossy resonator filters with unloaded quality factor control
PublikacjaA technique for fast synthesis of coupling matrix low-pass prototypes of generalized Chebyshev bandpass filters with lossy resonators is presented in this paper. The coupling matrix is found by solving a nonlinear least squares problem based on zeros and poles of filter's transfer functions. Additional constraints are introduced that allow one to control the level of unloaded quality factor of resonators.
-
Pounding-involved response of isolated and non-isolated buildings under earthquake excitation
PublikacjaCelem artykułu jest dokładna analiza zachowania się kolidujących ze sobą dwóch budynków z wibroizolacją i bez wibroizolacji poddanych obciążeniom dynamicznym podczas trzęsień ziemi. W analizie rozważno przypadki kiedy oba budynki mają wibroizolację, kiedy tylko jeden budynek ma wibroizolację oraz kiedy żaden z budynków nie ma wibroizolacji. Wyniki badań pokazują, iż budynki z wibroizolacją są bardziej podatne na zderzenia podczas...
Rok 2005
-
Peak impact force for seismic retrofit of pounding-prone structures
PublikacjaCelem artykułu jest wykorzystanie dwuwymiarowych wykresów pokazujących wartość maksymalnej siły zderzenia (spektrów odpowiedzi) do wzmacniania odporności sejsmicznej budowli narażonych na zderzanie się podczas trzęsień ziemi. Wyniki analizy wskazują, iż wykresy takie mogą być bardzo przydatnym narzędziem przy podejmowaniu decyzji dotyczącej wyboru metody wzmacniania.
Rok 2019
-
Planar Microwave Bragg Reflector Resonant Dielectric Sensor
PublikacjaIn this paper, a periodic structure is used to design a microwave Bragg reflector with the help of hexagonal lattice, which provides a 5 GHz wide stopband between the low-pass band with cut-off frequency 2.6 GHz and the bandpass response with start and stop frequency 7.8 GHz and 10.5 GHz, respectively. A defect in lattice allows passing a narrowband signal at 6 GHz which is found, from the dispersion relation, to be in the region...
Rok 2013
-
Polymeric Bearings – A New Base Isolation System to Reduce Structural Damage during Earthquakes
PublikacjaBase isolators, like lead rubber bearings, high damping rubber bearings or friction pendulum systems are extensively used in practice in many seismically active regions to protect structures against earthquake forces. The present paper reports the results obtained from the experimental study aimed to determine the effectiveness of the Polymeric Bearings in suppressing structural vibrations during dynamic excitations and therefore...
Rok 2021
-
Pounding between high-rise buildings founded on different soil types
PublikacjaEarthquake-induced pounding is a phenomenon that has been often experienced in previous earthquakes. The aim of this study is to investigate the effect of the soil type on high-rise buildings experiencing earthquake induced-pounding. Pounding between 7-storey and 9-storey buildings is examined under five soil types defined in the ASCE 7-10 code which are hard rock, rock, very dense soil and soft rock, stiff soil and soft clay soil....
-
Predicting the peak structural displacement preventing pounding of buildings during earthquakes
PublikacjaThe aim of the present paper is to verify the effectiveness of the artificial neural network (ANN) in predicting the peak lateral displacement of multi-story building during earthquakes, based on the peak ground acceleration (PGA) and building parameters. For the purpose of the study, the lumped-mass multi-degree-of-freedom structural model and different earthquake records have been considered. Firstly, values of stories mass and...
Rok 2003
-
Pounding of structures during earthquakes modelled by nonlinear viscoelastic impact element.
PublikacjaAnalizowano zderzenia konstrukcji budowlanych podczas trzęsień ziemi wykorzystując model lepkosprężysty siły zderzenia. W analizie, zachowanie konstrukcji o różnych własnościach dynamicznych symulowane jest modelem dyskretnym o skupionych masach. wyniki badań pokazują, iż zderzenie może prowadzić do znacznego wzrostu odpowiedzi konstrukcji mniej sztywnej i lżejszej.