Wyszukiwarka
Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications
Abstrakt
The study presented herein concerns the mechanical properties of two common polymers for potential biomedical applications, PLA and PETG, processed through fused filament fabrication (FFF)—Material Extrusion (ME). For the uniaxial tension tests carried out, two printing orientations—XY (Horizontal, H) and YZ (Vertical, V)—were considered according to the general principles for part positioning, coordinates, and orientation typically used in additive manufacturing (AM). In addition, six specimens were tested for each printing orientation and material, providing insights into mechanical properties such as Tensile Strength, Young’s Modulus, and Ultimate Strain, suggesting the materials’ potential for biomedical applications. The experimental results were then compared with correspondent mechanical properties obtained from the literature for other polymers like ASA, PC, PP, ULTEM 9085, Copolyester, and Nylon. Thereafter, fatigue resistance curves (S-N curves) for PLA and PETG, printed along 45°, were determined at room temperature for a load ratio, R, of 0.2. Scanning electron microscope observations revealed fibre arrangements, compression/adhesion between layers, and fracture zones, shedding light on the failure mechanisms involved in the fatigue crack propagation of such materials and giving design reference values for future applications. In addition, fractographic analyses of the fatigue fracture surfaces were carried out, as well as X-ray Computed Tomography (XCT) and Thermogravimetric (TGA)/Differential Scanning Calorimetric (DSC) tests.
Cytowania
Autorzy (10)
-
Rui F. Martins
-
Ricardo Branco
-
Miguel Martins
-
Zbigniew Marciniak
-
Rui Silva
-
Daniela Trindade
-
Carla Moura
-
Margarida Franco
-
Cândida Malça
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/polym16131868
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
Polymers
nr 16,
ISSN: 2073-4360 - Język:
- angielski
- Rok wydania:
- 2024
- Opis bibliograficzny:
- Martins R. F., Branco R., Martins M., Macek W., Marciniak Z., Silva R., Trindade D., Moura C., Franco M., Malça C.: Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications// Polymers -,iss. 13 (2024), s.1868-
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/polym16131868
- Źródła finansowania:
-
- COST_FREE
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 1 razy
Publikacje, które mogą cię zainteresować
Tensile and Fatigue Behavior of Additive Manufactured Polylactide
- A. Andrzejewska,
- Ł. Pejkowski,
- T. Topoliński