Wyszukiwarka
The Impact of Material Selection on Durability of Exhaust Valve Faces of a Ship Engine – A Case Study
Abstrakt
wo alloys were used in order to extend the service life of marine engine exhaust valve head. Layers of cobalt base alloys were made of the powders with with chemical composition as follow: the layer marked L12; C-1,55%; Si-1,21%; Cr-29,7%; W-9%; Ni-2%; Mo<0,01%; Fe-1,7%; Co-54,83% and the layer marked N; C-1,45%; Co-38,9%; Cr-24,13%; Ni-10,43%; W-8,75%; Fe-7,64%; Mo-7,56%; Si-2,59%. Base metal was valve steel after heat treatment. It was consisted of: C-0,374%; Cr-9,34%; Mn-0,402%; Ni-0,344%; Si-2,46%; Mo-0,822%; P0,0162%; S-0,001%. Layers on the valve faces were produced by laser cladding using the HPDL ROFIN DL020 laser. Grinding treatment is a very popular form of regeneration of seat and valve plug adhesions. Properly performed grinding operation ensures dimensional and shape accuracy of the surface from 7 to 5 accuracy class and surface roughness Ra not less than 0,16 μm, depending on the object and method of grinding. The 75H and 150S types are a significantly simplified form of valve plug face grinders. Finishing treatment was carried out with a Chris-Marine AB75H sander on a sanding stand equipped with a compressed air system - the stand was designed by the author. The sander has been set up to the surface of the valve stem so that the grinding angle of the valve faces is 30°+10°. A flat grinding wheel T1CRA54–K was used for machining. The plunge feed was g = 0,01 mm/rev. The thickness of the welded layer after grinding was 1,2 mm. Both valves were installed in the ship's engine and were used in real life. After 2000 hours of operation, the valve marked N was damaged. The valve marked L12 showed no damage and was in operation for the next 1000 hours.
Cytowania
-
4
CrossRef
-
0
Web of Science
-
4
Scopus
Autorzy (3)
-
Włodzimierz Kończewicz dr inż
-
Sylwia Bazychowska dr inż
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
Advances in Science and Technology Research Journal
nr 14,
strony 165 - 174,
ISSN: 2080-4075 - Język:
- angielski
- Rok wydania:
- 2020
- Opis bibliograficzny:
- Smoleńska H., Kończewicz W., Bazychowska S.: The Impact of Material Selection on Durability of Exhaust Valve Faces of a Ship Engine – A Case Study// Advances in Science and Technology. Research Journal -Vol. 14,iss. 3 (2020), s.165-174
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.12913/22998624/124074
- Weryfikacja:
- Politechnika Gdańska
wyświetlono 133 razy
Publikacje, które mogą cię zainteresować
Regeneration of marine engine valves using laser surfacing
- H. Smoleńska,
- J. Łabanowski,
- W. Kończewicz