Publikacje
Filtry
wszystkich: 334
Katalog Publikacji
-
Krótkie wsporniki.
PublikacjaW pracy przedstawiono problem zarysowania, wytężenia i nośności granicznej krótkich wsporników na tle badań eksperymentalnych i modeli teoretycznych, stanowiących naukowy komentarz i uzasadnienie wprowadzonych nowych zasad wymiarowania krótkich wsporników w normie PN-B-03264:2002.
-
Rewitalizacja konstrukcyjna Zielonej Bramy w Gdańsku.
PublikacjaReferat omawia przyczynę awarii oraz koncepcję odbudowy uszkodzonego jednegoz filarów podtrzymujących ścianę boczną Bramy od strony Motławy.
-
Stan awaryjny prefabrykowanej żelbetowej konstrukcji parkingu.
PublikacjaW referacie opisano stan awaryjny konstrukcji wsporczej dwupoziomowego parkingu. Uszkodzeniu uległy dwuramienne wsporniki słupów wewnętrznych, zarysowaniu zaś uległy słupy skrajne. Badania i analiza wytężenia uszkodzonych elementów umożliwiła określenie przyczyn uszkodzeń i podanie sposobu wzmocnień słupów.
-
Przebicie w ujęciu przepisów europejskich.
PublikacjaW pracy przedstawiono, wraz z komentarzem, model obliczeniowy oraz zasady wymiarowania konstrukcji żelbetowych na przebicie wg normy europejskiej pr EN 1992-1-1-July 2002.
-
Wykorzystanie odpadów i oczyszczanie spalin z zanieczyszczeń
PublikacjaOmówiono zagadnienia oczyszczania ścieków, pyłów i spalin powstających w spalarniach śmieci i w elektrowniach pracujących na paliwo otrzymywane z odpadów. Przedstawiono metody wykorzystania odpadów do produkcji różnego rodzaju materiałów stosowanych w przemyśle i gospodarce.
-
Słupy uzwojone.
PublikacjaW pracy przedstawiono teoretyczne podstawy wprowadzonej do zaktualizowanej normy żelbetowej nowej metody obliczenia nośności słupów uzwojonych. Przeanalizowano podstawowe czynniki wpływające na efektywność uzwojenia oraz wpływ tych czynników na nośność słupa uzwojonego wyznaczaną na podstawie metody normowej.
-
Ściskanie.
PublikacjaW pracy podano podstawowe zasady uwzględniania imperfekcji i efektów II rzędu w analizie elementów konstrukcyjnych poddanych ściskaniu przyjęte w EC-2.Przedstawiono sposoby uwzględniania imperfekcji oraz efektów II rzędu dla konstrukcji przesuwnych i nieprzesuwnych.
-
Normy obciążeń w Eurokodach.
PublikacjaPrzedstawiono genezę norm europejskich na tle jednoczącej się Europy po II wojnie światowej. Dokonano wprowadzenia do podstawowych norm projektowania konstrukcji budowlanych (Eurokodów), a także dokonano analizy porównawczej zobowiązującymi normami polskimi z tego zakresu.
-
Some theoretical models of technical woven fabric and their use in FEM.
PublikacjaCelem pracy było przedstawienie niektórych typów równań konstytutywnych opisujących zachowanie powłok membranowych używanych do konstrukcji przekryć wiszących. Ocena zastosowanego modelu izotropowego i sieci gęstej w analizie tkanin technicznych. Dokonano porównania wyników uzyskanych własnymi algorytmami metody elementów skończonych z powszechnie dostępnym na rynku programem komercyjnym MARC firmy MSC. Uzyskano dobrą zgodność...
-
Zespół mieszkaniowo-usługowy Witawa w Gdyni.
PublikacjaPowierzchnia użytkowa obiektu wynosi 52450 m2, a kubatura 131203 m3. Konstrukcję nośną stanowi ustrój żelbetowy monolityczny słupowo-płytowy. Autorzy artykułu będący jednocześnie autorami projektu omówili rozwiązania konstrukcyjne obiektu i jego realizację.
-
Ścinanie w ujęciu przepisów europejskich.
PublikacjaW pracy omówiono, wraz z obszernym komentarzem model obliczeniowy i zasady wymiarowania konstrukcji żelbetowych na ścinanie wg normy europejskiej. Podano wytyczne projektowania zbrojenia. Przedstawiono szeroki komentarz dotyczący zalet i wad modelu wg normy pr EN 1992 - July 2002
-
Ścinanie.
PublikacjaW pracy omówiono wybrane modele teoretyczne i badania eksperymentalne, które stanowią naukowe uzasadnienie wprowadzonych zmian w normie PN-B-03264:2002 w zakresie obliczania konstrukcji betonowych na ścinanie.
-
Zawalenie ceglanego sklepienia krzyżowego ''Zielonej Bramy'' w Gdańsku.
PublikacjaW referacie omówiono katastrofę sklepienia Zielonej Bramy w Gdańsku, jaka miała miejsce podczas prowadzonych prac renowacyjnych. Przedstawiono wyniki badań, które pozwoliły na określenie przyczyn katastrofy i koncepcję odbudowy zniszczonego sklepienia.
-
Projektowanie krótkich wsporników żelbetowych według PN-B-03264:2002.
PublikacjaPrzedstawiono nowe zasady projektowania krótkich wsporników żelbetowych wg PN-B-03264:2002. Przedstawiono krótkie naukowe podstawy opisywanych modeli obliczeniowych oraz ich zastosowanie praktyczne. W pracy zamieszczono także dwa przykłady projektowania wspornika słupa i wspornika belki wg opisywanych w artykule zasad.
-
Skręcanie.
PublikacjaW pracy omówiono wybrane modele teoretyczne i badania eksperymentalne stanowiące naukowy komentarz do zasad wymiarowania konstrukcji żelbetowych na skręcanie wprowadzonych do normy PN-B-03264:2002
-
Modelowanie numeryczne ścian warstwowych obciążonych mimośrodowo.
PublikacjaZaimplementowano model numeryczny ściany warstwowej, zespolonej murowo betonowej. Wyniki z prób ściskania mimośrodowego modelu numerycznego porównano z wynikami otrzymanymi dla klasycznej teorii liniowej.
-
Wpływ zmiany parametrów materiałowych na zagrożenie korozją biologiczną w budynkach.
PublikacjaPrzedstawiono analizę zjawiska cieplno-wilgotnościowego dla przegród, w których wystąpiła korozja biologiczna. Budynki, w których wystąpiło zagrzybienie zostały wykonane zgodnie z normami budowlanymi. Artykuł wyjaśnia mechanizm powstawania korozji biologicznej w przegrodach budowlanych
-
Badania betonów o przyspieszonym twardnieniu.
PublikacjaCharakterystyczną cechą betonów stosowanych w prefabrykatach jest ich wymagane szybkie twardnienie, umożliwiające skrócenie cyklu produkcyjnego i możliwie najszybszy transport elementów do odbiorcy. Do niedawna większość zakładów prefabrykacji stosowała w omawianym przypadku obróbkę hydrotermiczną betonu. Wprowadzenie do praktyki różnego rodzaju domieszek i dodatków umożliwiło wyeliminowanie z zakładów procesów termicznych.
-
Modification of cement-ash composites with steel fibre addition
PublikacjaPraca zawiera wyniki badań kompozytów cementowo-popiołowych, w których popiół zastosowano jako częściowy zamiennik cementu. Do kompozytów dodano niewielkie ilości dwóch rodzajów włókien stalowych. Zbadano właściwości techniczne kompozytów. Wytrzymałości kompozytów cementowo-popiołowych z włóknami stalowymi w stosunku do wytrzymałości kompozytów bez włókien po wszystkich okresach wiązania i twardnienia były wyższe od kilku do kilkudziesięciu...
-
Posadzki przemysłowe.
PublikacjaW monografii przedstawiono problemy dotyczące posadzek przemysłowych. Omówiono sposoby ich wymiarowania, badania oraz wykonania. Przedstawiono systemowe rozwiązania. Podano przykłady wadliwie zaprojektowanych i wykonanych posadzek.
-
Mesoscopic simulations of crack propagation in concrete using cohesive elements
PublikacjaThe paper presents results of two-and three-dimensional meso-scale simulations of fracture in notched concrete beams subjected to three-point bending test. Concrete was assumed as a 3-phase material composed of aggregate grains placed in the cement matrix with Interfacial Transitional Zones (ITZs) between then. In 2D simulations macro-voids were also taken into account. The particle distribution was taken from real concrete beams...
-
A constitutive law for concrete with smooth transition from continuous into discontinuous cracks’ description
PublikacjaPaper presents a constitutive model for concrete that combines a continuous and discontinuous crack’s description to simulate the concrete under tensile dominated loads. In a continuum regime, two different constitutive laws were used. First, a plasticity model with the Rankine failure criterion and an associated flow rule was used. Second, a constitutive law based on isotropic damage mechanics was formulated. Both model alternatives...
-
Finite element analysis on failure of reinforced concrete corner in sewage tank under opening bending moment
PublikacjaW artykule omówiono mechanizm uszkodzenia żelbetowego zbiornika ściekowego w narożniku ściany, który uległ uszkodzeniu podczas próby wypełnienia na skutek nadmiernych przemieszczeń poziomych ścian pod wpływem otwierającego momentu zginającego. Aby wyjaśnić przyczyny awarii, przeprowadzono kompleksowe obliczenia metodą elementów skończonych (MES) żelbetowego zbiornika w warunkach odkształcenia płaskiego. Beton zamodelowano za pomocą...
-
Experimental and theoretical studies of resonance effects during confined flow in silos
PublikacjaPrzedstawiono badania nad rezonansowymi efektami dynamicznymi podczas przepływów silosowych. Wpływ rezonansu na wielkość naporu był analizowany przy pomocy badań doświadczalnych i obliczeń MES na bazie prawa mikropolarnego sprężysto-plastycznego. Doświadczenia wykonano w silosie o przekroju okrągłym i prostokątnym. Zaproponowano efektywną metodę redukcji efektów dynamicznych. Obliczenia wykonano dla dużych i małych silosów.
-
Posadzki antyelektrostatyczne kluczowym elementem ochrony przed elektrycznością statyczną - wybrane wymagania techniczne
PublikacjaW artykule przedstwiono w spsoób syntetyczny zbiór podstawowych wymagań technicznych jakim powinny odpowiadać posadzki antyelektrostatyczne
-
Tests of bond between concrete and steel bars – literature background and program of own research
PublikacjaThis article deals with the issue of the bond between concrete and reinforcement. The bond is crucial for reinforced concrete elements because it is possible to transfer forces (stresses) from concrete to the reinforcement. Basic information related to the cooperation of concrete and rebars was recalled in the article. Selected issues concerning theoretical and numerical analysis as well as experiments of the bond phenomenon were...
-
State-of-the-art ideas for engineering laboratory classes – virtual reality framework
PublikacjaNowadays challenges in science and technology are a driving force in the development of contemporary solutions in education. Virtual reality brings to an edge human imagination. In this paper, authors propose a framework for civil engineering laboratory classes which brings a new quality in this area. The framework shows how to provide learners with an environment where they can realize the health and safety hazards of construction...
-
Performance of isotropic constitutive laws in simulating failure mechanisms in scaled RC beams
PublikacjaResults of numerical calculations of reinforced concrete (RC) beams are presented. Based on experimental results on longitudinally reinforced specimens of different sizes and shapes are investigated. Four different continuum constitutive laws with isotropic softening are used: one defined within continuum damage mechanics, an elasto-plastic with the Rankine criterion in tension and the Drucker-Prager criterion in compression, a...
-
The method of analysis of damage reinforced concrete beams using terrestial laser scanning
PublikacjaThe authors present an analysis of the possibility to assess deformations and mechanisms of destructing bent reinforced concrete beams using the terrestrial laser scanning. As part of the experiments carried out at the Regional Laboratory of Construction of the Concrete Structures Division of the Civil and Environmental Engineering Faculty at Gdansk University of Technology, the reinforced concrete beams were subjected to destruction...
-
Dome over the Gdynia seaport building
PublikacjaThe paper presents the description of structure and the selected problems of the technical condition, as well as the strength analysis of the thin-walled reinforced concrete shell which has been making a covering of the main hall of the Gdynia Seaport Building through the last 80 years. The rectangle projection of four single curvature shells of the dome was shaped out of mutual perpendicular intersection of two cylindrical shells. The...
-
State-of-the-art framework for high-speed camera and photogrammetric use in geometry evaluation of prestressed concrete failure process
PublikacjaPrestressed structures are a key to the realization of the boldest architectural ideas, regardless of shape complexity, great height and large span. A characteristic feature of the prestressed structure is the better use of concrete material properties by insertion of internal forces. The internal forces are opposed to external loads effects (forces and deformations of structure). Prestressed reinforced concrete beams are characterized...
-
Accuracy improvement of the prestressed concrete structures precise geometry assessment by use of bubble micro-sampling algorithm
PublikacjaPrestressed concrete structures are well-known technology for a vast period, but nevertheless, this very technology is a leading solution, currently used in construction industry. Prestressed concrete structures have a huge advantage over conventional methods because it uses the properties of concrete in a very efficient way. The main idea behind this technology is to introduce into the cross-section of the structure, the internal...
-
THE METHOD OF ANALYSIS OF DAMAGE REINFORCED CONCRETE BEAMS USING TERRESTRIAL LASER SCANNING
PublikacjaThe authors present an analysis of the possibility to assess deformations and mode of failure of R-C beams using terrestrial laser scanning. As part of experiments carried out at the Regional Laboratory of Construction (at Gdansk University of Technology), reinforced concrete beams were subjected to destruction by bending and by shear. The process of press impact on the reinforced concrete beam was recorded using terrestrial laser...
-
Simplified method of applying loads to flat slab floor structural model
PublikacjaThe article analyses the impact of the live load position on the surface of a reinforced concrete flat slab floor of 32.0 m × 28.8 m. Four variants of a live load position are investigated: located on the entire concrete slab, set in a chessboard pattern, applied by bands and imposed separately in each of the slab panels. Conclusions are drawn upon differences in bending moments, the time of calculation and the size of output files....
-
Load capacity of steel-aluminium brackets under static and cyclic laboratory tests
PublikacjaThe aim of the research is the laboratory investigation of steel-aluminium brackets employed to fasten lightweight curtain walls to building facilities. Static pressure, suction forces, and cyclic loads parallel to end plates (horizontal – to simulate wind influence) were applied in the study. The steel-aluminium brackets were tested on a reinforced concrete substrate made of C30/37 concrete class to simulate the real working conditions....
-
GIS three-dimensional Modelling with geo-informatics techniques
PublikacjaThe integration issue of virtual models and geo-referenced database have a very broad spectrum of potential applications. Before the integration issue was on the cusp, it was quite problematic to combine three-dimensional models with the geo-referenced database. An integrated database contains a variety of data including such as object orientated data model and raster data. Within this paper, authors present an integration process...
-
Processing of point cloud data retrieved from terrestrial laser scanning for structural modeling by Finite Element Method
PublikacjaFinite Element Method is one most popular contemporary method of strength analysis. The method is an advanced method for solving differential equations, based on discretization, which means that area is divided into finite elements. Each finite element has a solution of the equation approximated by specific functions and performing the actual calculations only for nodes of this division. Finite Element Method is widely used in...
-
Badania eksperymentalne słupów CFST z betonem zwykłym i ekspansywnym
PublikacjaPraca przedstawia badania eksperymentalne ponad 40 słupów CFST. Analizie poddano wyniki siły niszczącej słupy w aspekcie grubości stalowego płaszcza, smukłości słupa, rodzaju betonu wypełniającego stalową rurę (zwykły i ekspansywny) i jego wytrzymałości a także sposobu obciążania słupa (przez rdzeń lub przez cały przekrój). Sprawdzono efektywność słupów CFST z użyciem betonu ekspansywnego i zwykłego rozumianą jako stosunek nośności...
-
Limits of enhanced of macro- and meso-scale continuum models for studying size effect in concrete under tension
PublikacjaThe paper investigates a mechanical quasi-static size effect in concrete during splitting tension at the macro- and meso-level. In experiments, five different diameters of cylindrical concrete specimens were tested. Twodimensional plane strain finite element (FE) simulations were carried out to reproduce the experimental size effect. The size effect in experiments by Carmona et al. was also simulated. Two enhanced continuum concrete...
-
CHARACTERIZATION STUDY ON MECHANICAL PROPERTIES OF POLYESTER COATED FABRIC
PublikacjaThe scope of the paper is to determine the mechanical properties of the Precontraint 1302 polyester coated fabric under uniaxial and biaxial tensile tests. The results are compared for Precontraint 1302 fabric and other types of coated fabrics. The author applied an orthotropic model and a dense net model to reflect the polyester coated fabric performance under uniaxial and biaxial tensile tests. Material parameters are specified...
-
Experimental Study of Dapped-End Beams Subjected to Inclined Load
PublikacjaThis paper presents the results of an experimental investigation of the reinforced concrete (RC) dapped-end beams loaded with inclined forces, compared to identical ones loaded with vertical forces only. Such a load may occur in, for example, Gerber's joints or in dapped-end beams supported on corbels, where the vertical gravitation force is additionally completed with horizontal forces caused by temperature differences, shrinking,...
-
Application of multi-criteria method to assess the usefulness of a hydrotechnical object for floating housing
PublikacjaThis publication presents the analysis of three hydrotechnical objects located in the Municipality of Gdańsk with a view of mooring Floating Houses. The assessment of the adaptation of a hydrotechnical object has been carried out by a multi- criteria method AHP and using the main criteria such as: mooring system, communication with the mainland, availability of the utility networks, waste disposal and location of the parking spaces....
-
Use of radiography images and gray level co-occurrence matrix to investigate gravitational granular flow
PublikacjaThe paper presents analysis of granular gravitational flow based on radiography images processing. The investigations were conducted for silo model geometry with concentric/eccentric discharging modes. The continuous X-ray radiography scans of granular material distribution, acquired during flow, were obtained by means of an especially designed model silo with rectangular bin and different settings of hopper angles. Image processing...
-
Geometry of cycling track
PublikacjaThe paper describes the problems related to shaping of the geometry of the cycling track. The method of selection of the angle at the track curve is presented. Issues related to the selection of the appropriate transition curve and the superelevation section along the transition curve are presented. Reference to the recommendations presented in the literature and scientific papers has been made. Special attention...
-
Natural ventilation performance of family building in cold climate during windy days
PublikacjaAdequately designed natural ventilation is the cheapest and easiest way to effectively remove indoor pollutants and keep the fresh air inside a building. A prediction of performance and effectiveness of ventilation in order to determine the design of a ventilation system can provide real and long term cost savings. The paper presents results of performance (air change rate ACH) and effectiveness (CO2 concentration in the breathing...
-
Numerical and Analytical Investigation of Aluminium Bracket Strengthening
PublikacjaThis paper focuses on an analytical and numerical investigation of aluminium brackets used to fasten light-weight curtain walls to building facilities. The authors propose a solution to increase the load capacity of aluminium brackets by means of additional cover plates (straps). This paper also includes a short survey of literature and material properties concerning the EN AW-6060 T6 aluminium alloy. This paper suggests an initiation...
-
Degradation of the Concrete Railway Track Bed Located in the Vicinity of the Loading Wharf
PublikacjaThe following article describes the damages of the concrete railway track bed at the place of unloading petroleum products located in the immediate vicinity of the cargo berth. The concrete of the track bed has been a subject to degradation as a result of many years of exploitation resulting, inter alia, in its cyclical flooding of petroleum products during the unloading and loading of rail tankers. Repairs carried out in the previous...
-
Assessment of technical condition and repair of steel structure elements on the example of fire damage in a warehouse building
PublikacjaThe paper analyses a case study on the structural assessment of warehouse building partially damaged by fire caused by external source (fire of lorries close to the building). The authors focus on the site investigations and laboratory test results prior to assessing actual condition of the structural elements. Both strengthening concept and repair procedure of a steel column are addressed here. A short literature survey in the...
-
Natural ventilation performance of family building in cold climate during windless time
PublikacjaIn this paper, the field measurements results are presented on the stack ventilation effect. The paper presents the results of performance (air change rate ACH) natural ventilation for building with inlet gap measured for the transitional season (between heating and summer season). The measurements were performed during a windless time. The house was located in northern Poland, in a cold climate region. The measurement system...
-
Mechanical Properties of Aluminium Bracket Strengthening
PublikacjaThe aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021;...