Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle

Mateusz Galeja; Aleksander Hejna; Paulina Kosmela; Arkadiusz Kulawik

doi:10.3390/ma13020297

Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle

Abstrakt

Due to the rapid growth of 3D printing popularity, including fused deposition modeling (FDM), as one of the most common technologies, the proper understanding of the process and influence of its parameters on resulting products is crucial for its development. One of the most crucial parameters of FDM printing is the raster angle and mutual arrangement of the following filament layers. Presented research work aims to evaluate different raster angles (45°, 55°, 55’°, 60° and 90°) on the static, as well as rarely investigated, dynamic mechanical properties of 3D printed acrylonitrile butadiene styrene (ABS) materials. Configuration named 55’° was based on the optimal winding angle in filament-wound pipes, which provides them exceptional mechanical performance and durability. Also in the case of 3D printed samples, it resulted in the best impact strength, comparing to other raster angles, despite relatively weaker tensile performance. Interestingly, all 3D printed samples showed surprisingly high values of impact strength considering their calculated brittleness, which provides new insights into understanding the mechanical performance of 3D printed structures. Simultaneously, it proves that, despite extensive research works related to FDM technology, there is still a lot of investigation required for a proper understanding of this process.

Cytowania

7 2

CrossRef
0

Web of Science
7 1

Scopus

Autorzy (4)

Mateusz Galeja
- Główny Instytut Górnictwa Zakład Inżynierii Materiałowej
Aleksander Hejna dr inż.
Paulina Kosmela dr inż.
Arkadiusz Kulawik
- Główny Instytut Górnictwa Zakład Inżynierii Materiałowej

Cytuj jako

Pełna treść

pobierz publikację

pobrano 131 razy

Wersja publikacji: Accepted albo Published Version
Licencja: otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:: Publikacja w czasopiśmie
Typ:: artykuły w czasopismach
Opublikowano w:: Materials nr 13, strony 1 - 12,
ISSN: 1996-1944
Język:: angielski
Rok wydania:: 2020
Opis bibliograficzny:: Galeja M., Hejna A., Kosmela P., Kulawik A.: Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle// Materials -Vol. 13,iss. 2 (2020), s.1-12
DOI:: Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma13020297
Weryfikacja:: Politechnika Gdańska