Wyszukiwarka
Katalog Publikacji
Filtry
wszystkich: 70909
wyświetlamy 1000 najlepszych wyników Pomoc
Katalog Publikacji
Rok 2025
-
Electrifying the bus network with trolleybus: Analyzing the in motion charging technology
PublikacjaCurrently, electric buses are becoming more and more popular, and their number in operation is increasing. The range of electric buses is also increasing and solutions that seem to be working almost without fixed infrastructure are being promised. However, this requires the use of high-capacity batteries, which increases the weight and price of the vehicle and causes high costs of battery replacement during operation. Moreover,...
-
Electrospun Fibers from Biobased and Recycled Materials for Indoor Air Quality Enhancement
PublikacjaAir filters are crucial components of building ventilation systems. Compared to conventional air filter media like glass fibers and melt-blown fibers, electrospinning membranes are more efficient for capturing various pollutants due to the smaller pores present on the structure. In this paper, activated carbon filters were prepared with eco-friendly polylactic acid (PLA) and microcrystalline cellulose (MCC) using electrospinning...
-
Elicited Production of Essential Oil with Immunomodulatory Activity in Salvia apiana Microshoot Culture
PublikacjaSalvia apiana Jepson is an endemic North American species characterized by a rich phytochemical profile including abietane-type diterpenoids, phenolic acids, flavonoids, and thujone-free essential oil (EO). The current study was aimed at increasing EO production in bioreactor-grown S. apiana microshoot culture through biotic elicitation using chitosan, ergosterol, and yeast extract (YE). Additionally, the immunomodulatory effects...
-
Elucidating charge transfer process and enhancing electrochemical performance of laser-induced graphene via surface engineering with sustainable hydrogel membranes: An electrochemist's perspective
PublikacjaLaser-induced graphene (LIG) has emerged as a promising solvent-free strategy for producing highly porous, 3D graphene structures, particularly for electrochemical applications. However, the unique character of LIG and hydrogel membrane (HM) coated LIG requires accounting for the specific conditions of its charge transfer process. This study investigates electron transfer kinetics and the electroactive surface area of LIG electrodes,...
-
Energy landscape and structural transformations of C38 penta-fullerene: The stabilizing role of octagons and insights into penta-octa-penta-fullerene
PublikacjaTheoretical investigations were conducted to study the stability and energy landscape of C38 penta-fullerene, a structure comprising six penta-graphene unit cells. Vibrational analysis at the B3LYP/def2SVP level revealed 18 negative frequencies, indicating the dynamic instability of penta-fullerene. Analyzing the energy profiles for these vibrational modes led to the identification of six energetically favourable isomers, featuring...
-
Energy Router: A Sustainable Solution for Future Residential Buildings
PublikacjaElectric energy consumption is increasing much faster than the predicted growth in energy generation. Although the installed capacity of renewable energy sources is also expanding, grid congestion remains unavoidable without adopting smart energy management systems (EMS) and flexible power electronics structures. Given the significant installed capacity of photovoltaic (PV) systems in the residential sector, moving towards zero-emission...
-
Enhanced electrochemical capacitance of TiO2 nanotubes/MoSe2 composite obtained by hydrothermal route
PublikacjaThis study presents the hydrothermal synthesis of a novel TiO2 nanotubes/MoSe2 nanocomposite and investigates its enhanced electrochemical capacitance properties. The composite material was fabricated through a hydrothermal method, embedding MoSe2 onto TiO2 nanotubes. The resulting composite, termed Ti/TiO2/MoSe2, exhibited significantly improved electrochemical capacitance compared to TiO2 nanotubes alone. The synthesized composite...
-
Enhanced electrochemical performance of sulfur-doped laser-induced graphene supercapacitors: Synergistic effects of doping and plasmochemical surface modification
PublikacjaThis work introduces a novel, scalable methodology for rapidly fabricating sulfur-doped laser-induced graphene with enhanced porosity and wetting characteristics, targeting advanced supercapacitor applications. An infrared laser scribing technique was employed to create a three-dimensional porous graphene network, with in-situ sulfur doping achieved through physical evaporation using powder precursor. A second-pass laser process...
-
Enhanced Gain and Isolation Dual-Band Dual-Port MIMO Antenna with Integrated Lens for Millimeter-wave 5G Internet-of-Things Applications
PublikacjaThis paper proposes a dual-band dual-port Multiple Input Multiple Output (MIMO) antenna with enhanced gain and port isolation for 5G millimeter-wave (mm-wave) Internet of Things (IoT) applications. The gain enhancement is achieved using a 3D-printed dielectric lens integrated with the antenna, whereas port isolation is improved using a novel 2D compact metamaterial incorporated between the MIMO elements. The proposed integrated...
-
Enhanced sorption of inhibitory compounds from fermentation broth using a MOF@pseudo-DES composite
PublikacjaThe increase in biorefinery processes underscores the need for effective biofuel generation; nevertheless, inhibitors such as hydroquinone (HQ), 5-hydroxymethylfurfural (HMF), furfural (FF), and vanillin (VAN) resulting from biomass degradation impede microbial growth and process efficiency. Herein, a deep eutectic solvent (DES)-like substance was in-situ generated on the surface of NH2-UiO-66 via a post-synthetic coating process...
-
Enhancing Internal Cooling Channel Design in Inconel 718 Turbine Blades via Laser Powder Bed Fusion: A Comprehensive Review of Surface Topography Enhancements
PublikacjaInconel 718, a widely utilized Ni-based superalloy in the aerospace industry, is renowned for its exceptional mechanical properties, high-temperature corrosion resistance, and thermal stability, making it an ideal material for turbine blades operating under extreme conditions of up to 2200 °C and high-pressure. Traditional single crystal casting, the prevalent manufacturing method for turbine blades, poses inflexibility challenges....
-
Environmental and Colonial Dynamics: Turkey's Invasion of Kurdistan of Iraq in 21st-Century Postcolonial Literature
Publikacja -
Environmental and toxicological aspects of sulfamethoxazole photodegradation in the presence of oxidizing agents
PublikacjaSulfamethoxazole (SMX) is a popular active substance, which is extensively applied to treat bacterial infections in humans and animals. Due to its widespread use, SMX enters the natural environment, where it can undergo degradation. Similarly to other emerging contaminants, SMX photodegradation and the use of oxidants in wastewater treatment processes can lead to the formation of potentially adverse transformation products for...
-
Environmental fate and ecotoxicity of diclofenac degradation products generated by photo-assisted advanced oxidation processes
PublikacjaDiclofenac (DCF), a widely used non-steroidal anti-inflammatory drug (NSAID), poses environmental concerns due to its persistence, bioaccumulation potential, and transformation into toxic byproducts during oxidative and chlorination processes. This study investigated the photodegradation of DCF, both directly and in the presence of oxidants, to characterize the resulting...
-
Ergosterol and Lanosterol Derivatives: Synthesis and Possible Biomedical Applications
PublikacjaLanosterol is the crucial intermediate in ergosterol biosynthesis in fungi. A number of derivatives of natural or synthetic origin of these sterols are portrayed in this review. For the synthetic derivatives, strategies of their syntheses are presented. Biological activities of lanosterol and ergosterol derivatives include antimicrobial, especially antifungal action, anticancer and antiviral effects but also anti-inflammatory and...
-
Estimation of grasp type and determining grasping points for Adaptive Grasping Device
PublikacjaThe article describes the grasping point algorithm (GPA), aimed to determine points for picking up objects by a manipulator equipped with a proprietary gripper enabling three picking modes (suction cup, two fingers, three fingers). The paper outlines the topic of unknown object picking using various types of grippers, both from a stack of objects and stand-alone items. It describes details of four methods available in the literature....
-
European Green Deal Index: a new composite tool for monitoring European Union’s Green Deal strategy
PublikacjaThe European Union’s growth strategy, called "The European Green Deal," strives to create a competitive economy in which there are no net emissions of greenhouse gases in 2050 and growth is decoupled from resource use. This paper aims to develop a new composite indicator, the European Green Deal Index, to analyse the implementation of the European Green Deal in the Member States. This index is based on 26 indicators proposed by...
-
Evaluating oxide nanoparticle exsolution on A-site deficient PrBaCo2O6-δ electrodes
PublikacjaNanoparticle exsolution is a powerful technique for functionalizing redox oxides in energy applications, particularly at high temperatures. It shows promise for solid oxide fuel cells and electrolyzers. However, exsolution of other chemistries like metal oxides is not well studied, and the mechanism is poorly understood. This work explores oxide exsolution in PrBa1−xCo2O6−δ (x = 0, 0.05, 0.1, 0.15) double perovskites, practiced...
-
Evaluation of Damage and Nonlinearity of Cold Recycled Materials Mixtures Using a New Strain Sweep Testing Procedure
PublikacjaThis article describes a new strain sweep testing method to identify the effects of damage and reversible nonlinearity. Indirect tensile stiffness modulus tests were performed at increasing strain (up to 322 με) to evaluate the stiffness behavior with increasing damage; parallel tests at small strain (43 με) were performed to evaluate the linear behavior. Tests were carried out on two cement-bitumen–treated material (CBTM) mixtures...
-
Evaluation of overstrength-based interaction checks for columns in steel moment frames
PublikacjaCurrent design guidelines in the United States require a check for only column axial force under overstrength seismic loads for capacity-designed steel moment frames. A study is presented to examine the implications of this guidance, which disregards the column interaction check (including both axial force and moment) under overstrength seismic loads. A set of thirteen steel moment frames are designed using multiple rules that...
-
Evaluation of Selected Modulation Techniques in Underwater Multipath Channel
PublikacjaThere is a growing interest in the use of Autonomous Underwater Vehicles (AUVs) and Underwater Sensor Networks (USNs) for scientific, military, and industrial applications, leading to the development of wireless underwater communications. However, the channel for Underwater Acoustic (UWA) communications is challenging compared to the radio wave propagation in the air. Especially in shallow waters, where the channel has strong multipath...
-
Evaluation of the Variability of Vibration Measurement Results in Rolling Bearing Quality Control
PublikacjaThe final result of rolling bearing quality control is influenced by many factors that are not always taken into account. If non-conforming products leave the factory, then the reliability of equipment containing rolling bearings is significantly weakened. The paper presents an analysis of the reasons for the variability of vibration measurement results in rolling bearing quality control. The paper describes the organisation of...
-
Examination of the effects of short-term oxidative stress on glucocorticoid conversion in marine mussels
Publikacja -
Examining the burden of mental disorders in Jordan: an ecological study over three decades
Publikacja -
Excited states of mono- and biruthenium(II) complexes adsorbed on nanocrystalline titanium dioxide studied by electroabsorption spectroscopy
PublikacjaComprehensive characterization of the lowest energy electronic excited states for mono- and binuclear Ru(II) complexes containing bipyridine ligands has been performed by electroabsorption (EA) spectroscopy. The EA spectra of Ru complexes sensitizing a TiO2 semiconductor were compared with the spectra of these complexes in the form of solid neat films, both of which parametrized within the Liptay theory. The extracted values of...
-
Exergy analysis and thermodynamic optimization of a bioenergy with carbon capture and storage gas power plant using Monte Carlo simulation of sewage sludge composition
PublikacjaAn exergy analysis is performed on the negative CO2 emission gas power plant (nCO2PP), which integrates the fuel preparation, power generation and carbon capture process sections. The cycle is modeled in Aspen Plus coupled with REFPROP, combining deterministic and Monte Carlo stochastic approaches, the latter being a novelty in this work. In all cases studied, the simulations maintain the complex thermodynamic relationships. Exergy...
-
Experimental, Analytical, and Numerical Analyses of Slurry Erosion Resistance of Austenitic 1.4301 Stainless Steel
PublikacjaThe degradation of 1.4301 (AISI 304, X5CrNi18-10) stainless steel with two different impact angles (30 deg and 90 deg) has been investigated using a slurry pot tester. Spherical solid particles were used in the experiment. The impact angle significantly influenced the erosion resistance of 1.4301 steel. Tests conducted at an impact angle of 30 deg showed a higher erosion rate of approximately 91%. The test results showed that with...
-
Experimental and numerical study of free convective heat transfer in air performed simultaneously from the upper and lower surfaces of a horizontal plate heated on both sides
PublikacjaThis paper presents an experimental study, supported by numerical analysis, on convective heat transfer in air from a newly designed, horizontal, double-sided heated Type II plate. Unlike the single-sided heated Type I plate, where the heating surface faces either upwards or downwards, the Type II plate heats both surfaces simultaneously. The tested plate was constructed from three glued laminates, each 0.6 mm thick, resulting...
-
Experimental and Theoretical Study on Electron Interactions with Acetic Acid Molecules
PublikacjaThe absolute total cross section for electron collisions with acetic acid has been measured using an electrostatic electron spectrometerand linear transmission method for collision energies ranging from 0.4 to 300eV. Elastic electron scattering from acetic acid within a low-energy range has also been studied theoretically using the Schwinger multichannel and R-matrix methods, in the static-exchange and static-exchange plus polarization...
-
Experimental evidence of the excited-state mixing in the blue emitter for organic light-emitting diodes
PublikacjaHigh hopes have been placed on organic emitters, which are supposed to solve the problem of low stability of blue OLEDs. A peculiar phenomenon of thermally activated delayed fluorescence (TADF), which brought such emitters to the range of the top-studied materials for organic optoelectronics within the last decade, remains poorly understood. Here, we report the results of comprehensive photophysical studies of one of the most successful...
-
Experimental research and numerical modelling of mode I fracture initiation in notched polycarbonate specimens
PublikacjaIn this paper the results of experimental data from fracture test and numerical calculations under critical loading (at the moment of crack initiation) were presented. The polycarbonate specimens were subjected to tension. The flat notched elements (V-type edge notches with different root radii: 0.1, 0.5, 2 and 10 mm) were made in two thicknesses: 5 and 15 mm. The ARAMIS 3D 4 M vision system for non-contact displacement measurements,...
-
Experimental study of magnetorheological fluids under large periodic deformations
PublikacjaMagnetorheological (MR) fluids are smart materials whose properties can be controlled by a magnetic field. They are used in a variety of applications with tailored operating parameters, facilitating broad and relatively straightforward implementation and control of the functional properties of these systems. The aim of the study was to determine the variation in shear stress of MR fluids under varying...
-
Experimental study of the effect of seawater and temperature on the corrosion resistance of cement composites with the addition of copper post-flotation waste
PublikacjaThe presented results of the study concern the determination of corrosion resistance of cement composites with the copper post-flotation waste (PFW) as a cement substitute in the amounts of 2.5%, 5.0%, 7.5%, and 10%, exposed to seawater, depending on the temperature (10°C and 20°C). To better evaluate and understand the compressive strength, the hydration products of the cement composites were analyzed after exposure to seawater...
-
Experimental study of the effect of seawater and temperature on the corrosion resistance of cement composites with the addition of copper post-flotation waste
PublikacjaThe presented results of the study concern the determination of corrosion resistance of cement composites with the copper post-flotation waste (PFW) as a cement substitute in the amounts of 2.5%, 5.0%, 7.5%, and 10%, exposed to seawater, depending on the temperature (10°C and 20°C). To better evaluate and understand the compressive strength, the hydration products of the cement composites were analyzed after exposure to seawater...
-
Expert system against machine learning approaches as a virtual sensor for ventricular arrhythmia risk level estimation
PublikacjaRecent advancements in machine learning have opened new avenues for preventing fatal ventricular arrhythmia by accurately measuring and analyzing QT intervals. This paper presents virtual sensor based on an expert system designed to prevent the risk of fatal ventricular arrhythmias associated with QT-prolonging treatments. The expert system categorizes patients into three risk levels based on their electrocardiogram-derived QT...
-
Exploitation of Perennial Plant Biomass for Particleboards Designed for Insulation Applications
Publikacja -
Exploration of Behavioral Patterns and Cognitive Biases among Stock Market Investors
PublikacjaThis study aims to explore behavioral patterns and cognitive biases among stock market investors. By analyzing investor behavior through a stock market simulator, the research seeks to understand the impact of cognitive biases on investment decisions. The methodology encompasses a detailed analysis of transaction data to identify prevalent patterns and biases. Findings suggest that biases such as overconfidence, representativeness...
-
Exploration of vitamin D hydroxy metabolites C3 epimers in patients with cardiovascular disease: an observational study
Publikacja -
Exploring Cu-oxide and Mn-oxide impregnated biochar nanocomposites for sustainable chromium removal from water: Reusability and kinetic studies
PublikacjaThe present study aims to evaluate the potential of Sesbania bispinosa biochar (SBBC) and its nanocomposites, SBBC/Mn-oxide, SBBC/Cu-oxide and SBBC/Mn-oxide/Cu-oxide for Cr removal from contaminated water. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and point of zero charge (PZC) were employed. Impact of initial Cr concentration (25–200 mg/L), pH...
-
Exploring the role of carbon nitrides (melem, melon, g-C3N4) in enhancing photoelectrocatalytic properties of TiO2 nanotubes for water electrooxidation
Publikacja -
Fatigue Damage Evolution in SS316L Produced by Powder Bed Fusion in Different Orientations with Reused Powder Feedstock
PublikacjaBackground Metal Laser Powder Bed Fusion Melting (LPBF-M) is considered economically viable and environmentally sustainable because of the possibility of reusing the residual powder feedstock leftover in the build chamber after a part build is completed. There is however limited information on the fatigue damage development of LPBF-M samples made from reused feedstock. Objective In this paper, the stainless steel 316 L (SS316L)...
-
Features and skills that build the profile of the head of a communications office (in the opinion of students) - case study
PublikacjaThe article presents an introduction to the concept of the features and skills that are targeted to build a communication manager based on the available literature on the subject. The article describes comprehensive competencies that can be used in practice. The publication begins with an indication of communication in the light of current literature on the subject, an explanation of the characteristics...
-
Feminist Lens on Gender Roles in Entrepreneurial Intention and Implementation
PublikacjaBased on Social Feminist Theory, Post-Structural Feminism and Gender-Role Orientation (GRO) (masculinity, femininity and androgyny), the aim of this research is to study the entrepreneurial process through the lenses of both biological sex and socially constructed gender, in order to disentangle their effects and to shed new light on the process. Secondly, we aim to push forward the research on the early-stage entrepreneurial process...
-
FeS-based nanocomposites: A promising approach for sustainable environmental remediation – Focus on adsorption and photocatalysis – A review
PublikacjaPopulation expansion, industrialization, urban development, and climate changes increased the water crisis in terms of drinking water availability. Among the various nanomaterials for nanoremediation towards water treatment, FeS-based nanocomposites have emerged as promising candidates in the adsorptive and photocatalytic removal of contaminants. This paper, therefore, evaluates the potential of FeS-based nanocomposites for environmental...
-
Finite Element Analysis of Occupant Risk in Vehicular Impacts into Cluster Mailboxes
PublikacjaThe deployment of cluster mailboxes (CMs) in the U.S. has raised safety concerns for passengers in potential vehicular crashes involving CMs. This study investigated the crashworthiness of two types of CMs through nonlinear finite element simulations. Two configurations of CM arrangements were considered: a single- and a dual-unit setup. These CM designs were tested on flat-road conditions with and without a curb. A 2010 Toyota...
-
First truly deep eutectic solvent (DES) based stationary phase for high-performance liquid chromatography (HPLC)
PublikacjaDeep eutectic solvents (DESs) have gained significant attention due to their environmentally friendly properties and versatile applications in various fields, including analytical chemistry. This study investigates the use of a deep eutectic solvent (DES) composed of l-proline protonated with hydrochloric acid and xylitol as a surface modifier for silica-based stationary phases in high-performance liquid chromatography (HPLC)....
-
Flexibility in PAM recognition expands DNA targeting in xCas9
PublikacjaxCas9 is an evolved variant of the CRISPR-Cas9 genome editing system, engineered to improve specificity and reduce undesired off-target effects. How xCas9 expands the DNA targeting capability of Cas9 by recognising a series of alternative protospacer adjacent motif (PAM) sequences while ignoring others is unknown. Here, we elucidate the molecular mechanism underlying xCas9’s expanded PAM recognition and provide critical insights...
-
Flexible MXene/Laser-Induced Porous Graphene AsymmetricSupercapacitors: Enhanced Energy Density of Lateral and Sandwich Architectures Under Different Electrolytes
PublikacjaDeployment of two-dimensional layered materials beyond graphene, i.e., MXene (Ti3C2Tx, T=-OH, F, O) are rigorously explored for generation-II electrochemical energy storage systems. We report strategic development of asymmetric supercapacitors (ASCs) comprising MXene as negative and laser-induced porous graphene (LIPG) as positive electrode (i.e., MXene//LIPG) to improve electrochemical energy storage in lateral (coplanar) and...
-
Fluoride-induced stress shapes partial denitrification granules to sustain microbial metabolism
PublikacjaThe presence of fluoride ions (F-) in nitrogen-rich wastewater from photovoltaic and semiconductor industries introduces a significant challenge to biological treatment processes, particularly for the innovative partial denitrification (PD) process, which supplies nitrite for anaerobic ammonium oxidation (Anammox). This study provides the first comprehensive and systematic investigation of the effects of F- stress on the granule-based...
-
Fluvial ecology disasters: the impact of the Gliwice Canal on the ecological crisis in the Oder River basin, Poland (2022)
PublikacjaIn August 2022, the Oder River experienced an ecological disaster, resulting in the extinction of hundreds of aquatic organ- isms. Mass fsh deaths also occurred during that time in the Gliwice Canal, located in southern Poland, which connects to the upper section of the Oder River. The aim of the article was to assess the impact of the waters from the Gliwice Canal on the water quality changes in the Oder River, as expressed by...