Failures and a concept of corrosion protection system for spiral classifiers at KGHM Polska Miedź S.A. Ore Concentration Plant - Publikacja - MOST Wiedzy

Wyszukiwarka

Failures and a concept of corrosion protection system for spiral classifiers at KGHM Polska Miedź S.A. Ore Concentration Plant

Abstrakt

The Ore Concentration Plant, where the process of flotation is carried out as well as the final production of copper concentrate, plays a key role in the entire production line of KGHM Polska Miedź S.A. Majority of operations related to the run-of-mine preparation to copper flotation enrichment are carried out in a water environment. The maintaining of production process continuity requires to pursue minimisation of many production limitations. The corrosive action of the technological medium, being a salted water suspension of ground copper ore, is one of them. The concept of spiral classifiers cathodic protection presented in this paper may become an alternative to the anti-corrosion protection methods of machinery and equipment used now at the KGHM. The obtained results of research indicate a possibility of significant reduction of classifiers corrosion rate at the application of cathodic protection and of a few times extension of the period of spiral classifiers operation, which replacement generates substantial operating costs.

Cytowania

  • 2

    CrossRef

  • 0

    Web of Science

  • 2

    Scopus

Autorzy (2)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 27 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
ENGINEERING FAILURE ANALYSIS nr 109, strony 104287 - 104294,
ISSN: 1350-6307
Język:
angielski
Rok wydania:
2020
Opis bibliograficzny:
Czekajło M., Żakowski K.: Failures and a concept of corrosion protection system for spiral classifiers at KGHM Polska Miedź S.A. Ore Concentration Plant// ENGINEERING FAILURE ANALYSIS -Vol. 109, (2020), s.104287-104294
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.engfailanal.2019.104287
Bibliografia: test
  1. M. Bigum, L. Brogaard, et al., Metal recovery from high-grade WEEE: A life cycle assessment. J.Hazard. Mater. 207 (2012) 8-14. https://doi.org/10.1016/j.jhazmat.2011.10.001 otwiera się w nowej karcie
  2. Baran, M. Sliwka, et al., Selected properties of flotation tailings wastes deposited in the Gilow and Zelazny Most waste reservoirs regarding their potential environmental management. Arch. otwiera się w nowej karcie
  3. Min. Sci. 58 (3) (2013) 969-978. https://doi.org/10.2478/amsc-2013-0068 otwiera się w nowej karcie
  4. C.M. Torres, M.E. Taboada, T.A. Graber, et al., The effect of seawater based media on copper dissolution from low-grade copper ore. Miner. Eng. 71 (2015) 139-145. otwiera się w nowej karcie
  5. https://doi.org/10.1016/j.mineng.2014.11.008 otwiera się w nowej karcie
  6. B.T. Lu, Statistical approaches for assessment of water corrosivity. Corros. Eng. Sci. Technol. 46 (5) (2011) 651-656. https://doi.org/10.1179/147842210X12695149034016 otwiera się w nowej karcie
  7. R.A. Pisigan, J.E. Singley, Evaluation of water corrosivity using the Langelier index and relative corrosion rate models. Mater. Perform. 24 (4) (1985) 26-36. otwiera się w nowej karcie
  8. K. Skrzypkowski, W. Korzeniowski, et al., Application of long expansions rock bolt support in the underground mines of Legnica-Glogow copper district. Studia Geotechnica et Mechanica 39 (3) (2017) 45-57. https://doi.org/10.1515/sgem-2017-0029 otwiera się w nowej karcie
  9. Y. Atasoy, D.J. Spottiswood, A study of particle separation in a spiral concentrator. Miner. Eng. 8 (10) (1995) 1197-1208. https://doi.org/10.1016/0892-6875(95)00084-4 otwiera się w nowej karcie
  10. C. Bazin, M. Sadeghi, M. Renaud, An operational model for a spiral classifier. Miner. Eng. 91 (2016) 74-85. https://doi.org/10.1016/j.mineng.2015.09.024 otwiera się w nowej karcie
  11. P.I. Pilov, A.S. Kirnarsky, Developments of spiral separation technology for retreatment of fines from coal dumps. Mine planning and equipment section. In: 6th International Symposium on Mine Planning and Equipment Selection (MPES) Ostrava, Czech Republic, (1997) 193-196.
  12. X. Lan, J.T. Gao, et al., A novel method of selectively enriching and separating rare earth elements from rare-earth concentrate under super gravity. Miner. Eng. 133 (2019) 27-34 otwiera się w nowej karcie
  13. https://doi.org/10.1016/j.mineng.2019.01.010 otwiera się w nowej karcie
  14. N.E. Altun, et al., The use of continuous centrifugal gravity concentration in grinding circuit. Modified approach for improved metallurgical performance and reduced grinding requirements.
  15. Physicochem. Probl. Mineral Pro. 51 (1) (2015) 115-126. https://doi.org/10.5277/ppmp150111 otwiera się w nowej karcie
  16. L. Tole, G. Koop, Estimating the impact on efficiency of the adoption of a voluntary environmental standard: an empirical study of the global copper mining industry. J. Prod. Anal. 39 (1) (2013) 34-45. https://doi.org/10.1007/s11123-012-0278-y otwiera się w nowej karcie
  17. S. Szabo, I. Bakos, Cathodic Protection with Sacrificial Anodes. Corr. Rev. 24 (3-4) (2006a) 231- 280. https://doi.org/10.1515/CORRREV.2006.24.3-4.231 otwiera się w nowej karcie
  18. S. Szabo, I. Bakos, Impressed Current Cathodic Protection. Corr. Rev. 24 (1-2) (2006b) 39-62. https://doi.org/10.1515/CORRREV.2006.24.1-2.39 otwiera się w nowej karcie
  19. J. Orlikowski, J. Ryl, et al., Instantaneous Impedance Monitoring of Aluminum Alloy 7075 otwiera się w nowej karcie
  20. Corrosion in Borate Buffer with Admixed Chloride Ions. Corrosion 71 (7) (2015) 828-838. https://doi.org/10.5006/1546 otwiera się w nowej karcie
  21. M. Narozny, K. Zakowski, K. Darowicki, Method of sacrificial anode transistor-driving in cathodic protection system. Corrosion Sci. 88 (2014) 275-279. otwiera się w nowej karcie
  22. https://doi.org/10.1016/j.corsci.2014.07.041 otwiera się w nowej karcie
  23. M. Narozny, K. Zakowski, K. Darowicki, Method of sacrificial anode dual transistor-driving in stray current field. Corrosion Sci. 98 (2015) 605-609. otwiera się w nowej karcie
  24. https://doi.org/10.1016/j.corsci.2015.06.006 otwiera się w nowej karcie
  25. K. Darowicki, J. Orlikowski, et al., Conducting coatings as anodes in cathodic protection. Prog. Org. Coat. 46 (3) (2003) 191-196. https://doi.org/10.1016/S0300-9440(03)00003-1 otwiera się w nowej karcie
  26. T. Huber, Y. Wang, Effect of Propeller Coating on Cathodic Protection Current Demand: Sea Trial and Modeling Studies. Corrosion 68 (5) (2012) 441-448. https://doi.org/10.5006/0010-9312- 68.5.441 otwiera się w nowej karcie
  27. O.O. Knudsen, U. Steinsmo, Effects of cathodic disbonding and blistering on current demand for cathodic protection of coated steel. Corrosion 56 (3) (2000) 256-264. otwiera się w nowej karcie
  28. https://doi.org/10.5006/1.3287651 otwiera się w nowej karcie
  29. K. Zakowski, Studying the effectiveness of a modernized cathodic protection system for an offshore platform. Anti-Corros. Methods Mater. 58 (4) (2011) 167-172. otwiera się w nowej karcie
  30. https://doi.org/10.1108/00035591111148876 otwiera się w nowej karcie
  31. K. Zakowski, M. Szocinski, M. Narozny, Study of the formation of calcareous deposits on cathodically protected steel in Baltic sea water. Anti-Corros. Methods Mater. 60 (2) (2013) 95- 99. https://doi.org/10.1108/00035591311308065 otwiera się w nowej karcie
  32. J.D. Sinclair, 1978. Instrumental gravimetric method for indexing materials, contaminants, and corrosion products according to their hygroscopicity. J. Electrochem. Soc. 125 (5) (1978) 734- 742. https://doi.org/10.1149/1.2131538 otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

wyświetlono 112 razy

Publikacje, które mogą cię zainteresować

Meta Tagi