Determination of mechanical properties of Ti13Nb13Zr cubes made with STL technology subjected to uniaxial compression - Open Research Data - MOST Wiedzy

Wyszukiwarka

Determination of mechanical properties of Ti13Nb13Zr cubes made with STL technology subjected to uniaxial compression

Opis

The aim of the study was to determine the mechanical properties of Ti13Nb13Zr cubes made with STL technology (3D printing). The experiments were carried out on the Hung Ta universal test machine HT-2402. Cubes with the initial dimensions of 10x10x10 mm were subjected to compression by increasing force to over 80 kN. In various experiments, the angle between the direction of force and the direction of printing was 0, 45 or 90 degrees. The dependence of deformation (shortening) of the sample depending on the load was observed. The collected measurement data make it possible to determine the average and directional mechanical properties (Young's modulus, Poisson's number) of the material used for printing. The differences in the directional values of these quantities confirm the anisotropicity of the material depending on the print direction.

Plik z danymi badawczymi

Wyznaczanie właściwości mechanicznych kostek z Ti13Nb13Zr wykonanych technologią STL poddanych jednoosiowemu ściskaniu.zip
184.5 kB, S3 ETag f4750fb8cbf3be42961cb1c19b45450f, pobrań: 48
Hash pliku liczony jest ze wzoru
hexmd5(md5(part1)+md5(part2)+...)-{parts_count} gdzie pojedyncza część pliku jest wielkości 512 MB

Przykładowy skrypt do wyliczenia:
https://github.com/antespi/s3md5
pobierz plik Wyznaczanie właściwości mechanicznych kostek z Ti13Nb13Zr wykonanych technologią STL poddanych jednoosiowemu ściskaniu.zip

Informacje szczegółowe o pliku

Licencja:
Creative Commons: by-nc 4.0 otwiera się w nowej karcie
CC BY-NC
Użycie niekomercyjne

Informacje szczegółowe

Rok publikacji:
2019
Data zatwierdzenia:
2020-12-17
Data wytworzenia:
2019
Język danych badawczych:
polski
Dyscypliny:
  • Inżynieria mechaniczna (Dziedzina nauk inżynieryjno-technicznych)
  • Inżynieria materiałowa (Dziedzina nauk inżynieryjno-technicznych)
DOI:
Identyfikator DOI 10.34808/xxbz-2a47 otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

Słowa kluczowe

Cytuj jako

Autorzy

wyświetlono 181 razy