prof. dr hab. inż. Magdalena Rucka
Employment
- Head of Department at Katedra Wytrzymałości Materiałów
- Professor at Katedra Wytrzymałości Materiałów
- at Faculty of Civil and Environmental Engineering
Publications
Filters
total: 203
Catalog Publications
Year 2004
-
On using digital photos in a structure rehabilitation.
PublicationPraca dotyczy metody optycznego pomiaru ugięć w konstrukcjach inżynierskich na podstawie fotografii cyfrowych.
-
Numerical simulation of damage detection in rectangular plate by two-dimensional wavelet transform.
PublicationW pracy przedstawiono metodę lokalizacji pęknięć w płytach przy zastosowaniu transformaty falkowej.
-
Identyfikacja zniszczeń belek poprzez transformatę falkową statycznej linii ugięcia.
PublicationW pracy przedstawiono technikę lokalizacji zniszczeń poprzez transformatę falkową statycznej linii ugięcia belki wspornikowej. Przedstawiono obliczenia bazujące na danych numerycznych i eksperymentalnych.Eksperymentalne pomiary ugięć wykonano metodą optyczną na podstawie forografii cyfrowych.
Year 2012
-
On some properties of 2d spectral finite elements in problems of wave propagation
PublicationW pracy przedstawiono sformułowanie dwuwymiarowych elementów spektralnych stosowanych w symulacji propagacji fal prowadzonych. Zbadano własności tych elementów pod kątem występowania form pasożytniczych, odporności na dystorsję siatki oraz zbadano wpływ kształtu elementu na krzywe dyspersji
Year 2014
-
Numeryczna i doświadczalna analiza propagacji fal sprężystych przez stalowe połączenie śrubowe
PublicationW pracy przedstawiono numeryczną i doświadczalną analizę propagacji fal sprężystych w połączeniu śrubowym dwóch blach stalowych. Obliczenia numeryczne metodą elementów skończonych przeprowadzono dwuetapowo. W pierwszej fazie analizowano statyczny wpływ sił sprężających na stan odkształceń i naprężeń połączenia śrubowego, formułując warunki kontaktu zastosowane następnie w modelu dynamicznym. W analizie propagacji fal sprawdzono...
-
Latająca Kawiarenka Naukowa
PublicationW artykule opisano spotkanie Latającej Kawiarenki Naukowej mającej na celu popularyzację nauki z zakresu mechaniki konstrukcji oraz mostów. Kawiarenka zatytułowana „Mosty: cuda architektury i techniki” została zorganizowana przez Akademię Młodych Uczonych PAN oraz Koło Naukowe Mechaniki Budowli KoMBo.
-
Konkurs budowy mostów wyKOMBinuj mOst 2014
PublicationKonkurs budowy mostów wyKOMBinuj mOst, organizowany przez Koło Naukowe Mechaniki Budowli KOMBO działające przy Katedrze Mechaniki Budowli i Mostów (Wydział Inżynierii Lądowej i Środowiska) oraz przez Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej Oddział Gdańsk, na trwałe wpisał się już w kalendarz najważniejszych imprez studenckich kierunków związanych z budownictwem. W dniach 28–30 maja 2014 roku odbyła się już siódma...
-
Kompozyt przekładkowy GFRP z rdzeniem PET w powłokowej konstrukcji kładki dla pieszych
PublicationW artykule przedstawiono badania doświadczalne materiału przekładkowego zastosowanego w innowacyjnym rozwiązaniu mostu dla pieszych. Kładka o konstrukcji powłokowej wykonana jest z kompozytu przekładkowego i jest wytworzona w całości bez złączy w technologii infuzji. Artykuł przedstawia wyniki badań doświadczalnych okładzin, pianki PET oraz testy 3- i 4-punktowego zginania belek wykonanych z materiału przekładkowego. Uzyskane wyniki...
Year 2016
-
Numerical modeling of GPR field in damage detection of a reinforced concrete footbridge
PublicationThe paper presents a study on the use of the ground penetrating radar (GPR) method in diagnostics of a footbridge. It contains experimental investigations and numerical analyses of the electromagnetic field propagation using the finite difference time domain method (FDTD). The object of research was a reinforced concrete footbridge over a railway line. The calculations of the GPR field propagation were performed on a selected cross-section...
-
Latająca Kawiarenka Naukowa Akademii Młodych Uczonych
PublicationW artykule opisano spotkanie Latającej Kawiarenki Naukowej mającej na celu popularyzację nauki z zakresu diagnostyki i mechaniki konstrukcji. Kawiarenka zatytułowana „Diagnostyka, czyli jak rozpoznać, czy konstrukcja budowlana choruje” została zorganizowana przez Akademię Młodych Uczonych PAN oraz Koło Naukowe Mechaniki Budowli KoMBo w grudniu 2015 r.
Year 2021
-
Non-destructive Testing of Wooden Elements
PublicationExamining the condition of wooden elements is crucial from the perspective of proper structure performance. If the deterioration in the internal wood condition, which displays no symptoms visible from the outside, is detected, the further spread of the deterioration can be prevented. Test results often point to the necessity of conducting repairs and, renovations, replacing the structure of wooden beams, or even substituting a...
-
Non-Destructive Diagnostics of Concrete Beams Strengthened with Steel Plates Using Modal Analysis and Wavelet Transform
PublicationExternally bonded reinforcements are commonly and widely used in civil engineering objects made of concrete to increase the structure load capacity or to minimize the negative effects of long-term operation and possible defects. The quality of adhesive bonding between a strengthened structure and steel or composite elements is essential for effective reinforcement; therefore, there is a need for non-destructive diagnostics of adhesive...
-
Monitoring the curing process of epoxy adhesive using ultrasound and Lamb wave dispersion curves
PublicationMonitoring the stiffness of adhesives is a crucial issue when considering the durability andstrength of adhesive joints. While there are many studies conducted on specimens madeonly from adhesive, the problem of curing of an adhesive film in real joints is moderatelyconsidered. This paper presents the monitoring of stiffening of epoxy adhesive using ultra-sound. Ultrasonic pulse velocity method was firstly applied for monitoring...
-
Medially positioned plate in first metatarsophalangeal joint arthrodesis
PublicationObjective The purpose of this study was to biomechanically compare the stability of first metatarsophalangeal (MTP1) joint arthrodesis with dorsally and medially positioned plates. Methods A physical model of the MTP1 joint consists of printed synthetic bones, a titanium locking plate and screws. In the experiments, samples with dorsally and medially positioned plates were subjected to loading of ground load character in a universal...
-
Imaging of Increasing Damage in Steel Plates Using Lamb Waves and Ultrasound Computed Tomography
PublicationThis paper concerns inspection of steel plates, with particular emphasis on the assessment of in-creasing damage. Non-destructive tests were performed on four plates, one of which was un-damaged, while the remaining three had a defects in the form of circular holes with a diameter of 2, 5, and 10 cm. Guided Lamb waves were used in the research, and the image reconstruction was performed using ultrasound computed tomography. The...
Year 2019
-
Non-Destructive Testing of a Sport Tribune under Synchronized Crowd-Induced Excitation Using Vibration Analysis
PublicationThis paper presents the concept of repairing the stand of a motorbike speedway stadium. The synchronized dancing of fans cheering during a meeting brought the stand into excessive resonance. The main goal of this research was to propose a method for the structural tuning of stadium stands. Non-destructive testing by vibration methods was conducted on a selected stand segment, the structure of which recurred on the remaining stadium...
Year 2017
-
Non-destructive inspection of ground anchors using guided wave propagation
PublicationThis paper deals with numerical and experimental investigations of specific problems of guided wave propagation in ground anchors. The research focuses on recognizing the phenomenon of the energy transfer between anchor components. Particular attention is paid to characteristic features of guided waves propagating in free and embedded parts of the tendon, at the interface between the tendon and the surrounding anchor body as well...
-
Modelling of Mechanical Behaviour of High-Frequency Piezoelectric Actuators Using Bouc-Wen Model
PublicationThe paper presents the application of a modified, symmetrical Bouc-Wen model to simulate a mechanical behaviour of high-frequency piezoelectric actuators (PAs). In order to identify parameters of the model, a two-step algorithm was utilized. In the first stage, the mechanical parameters were identified by taking into account their bilinear variability and using a square input voltage waveform. In the second step, the hysteresis...
-
Lamb wave propagation in a single lap adhesive joint
Publication
Year 2023
-
Non-destructive Diagnostics of the Floor in the Gdańsk Crane Using Ground Penetrating Radar = Diagnostyka nieniszcząca posadzki w gdańskim Żurawiu z zastosowaniem metody georadarowej
PublicationThis paper presents the results of a ground penetrating radar (GPR) survey carried out at the Crane in Gdańsk. The measurements were conducted on the floor of the southern and northern towers. The aim of the experiment is to assess the possibility of detecting anomalies beneath the floor. The surveys were carried out in a non-destructive manner, using a georadar unit with 2 GHz and 400/900 MHz antennas. This paper compares the...
-
Microcrack monitoring and fracture evolution of polyolefin and steel fibre concrete beams using integrated acoustic emission and digital image correlation techniques
PublicationThe use of polymer and steel fibres in plain concrete appears to be an excellent solution for limiting crack propagation and improving the post-ductility performance of concrete structures. Based on this premise, this study investigated the fracture evolution of polyolefin fibre-reinforced concrete (PFRC) and steel fibre-reinforced concrete (SFRC) specimens through the integrated application of two diagnostic techniques, acoustic...
Year 2010
-
Non-destructive diagnostics of concrete cantilever beam and slab by impact echo method = Nieniszcząca diagnostyka konstrukcji betonowych belek wspornikowych i płyty stropowej za pomocą metody impact echo
PublicationPraca poświęcona jest zastosowaniu fal sprężystych na przykładzie w metody impact-echo. Metoda ta wykorzystuje zjawisko propagacji fal wzbudzanych przez mechaniczne uderzenie i ich pomiar za pomocą jednego lub dwóch akcelerometrów. Przeprowadzone testy eksperymentalne dla betonowych wsporników oraz stropu potwierdziły skuteczność metody w wykrywaniu uszkodzeń.
-
Neuro-wavelet damage detection technique in beam, plate and shell structures with experimental validation
PublicationNiniejsza praca poświęcona jest technice diagnostyki konstrukcji bazującej na transfor-macie falkowej oraz sztucznych sieciach neuronowych (tzw. system neuro-wavelet). Zastosowanie analizy falkowej pozwala na lokalizację uszkodzeń wymagającą mini-malnej ilości danych wejściowych. W tym celu niezbędna jest tylko odpowiedź kon-strukcji pomierzona w wielu punktach. Poprawę efektywności lokalizacji zniszczeń uzyskano poprzez użycie...
Year 2018
-
Non-Destructive Assessment of Masonry Pillars using Ultrasonic Tomography
PublicationIn this paper, a condition assessment of masonry pillars is presented. Non-destructive tests were performed on an intact pillar as well as three pillars with internal inclusions in the form of a hole, a steel bar grouted by gypsum mortar, and a steel bar grouted by cement mortar. The inspection utilized ultrasonic stress waves and the reconstruction of the velocity distribution was performed by means of computed tomography. The...
-
Monitoring Steel Bolted Joints during a Monotonic Tensile Test Using Linear and Nonlinear Lamb Wave Methods: A Feasibility Study
PublicationThe structural integrity of steel bolted joints may be compromised due to excessive loading. Therefore, condition assessment and the detection of potential defects before they cause a failure have become a major issue. The paper is focused on the condition monitoring of a bolted lap joint subjected to progressive degradation in a tensile test. The inspection used Lamb waves propagated through the overlap area. Wave propagation...
-
Modelling of elastic wave propagation in a bolted joint using a thin layer of shell elements
PublicationThere are many mathematical models describing the propagation of elastic waves through the imperfect boundary of two media. They were successfully applied to modelling of high frequency bulk waves and their interaction with local defects. On the other hand, the existing literature models of bolted connections ignore the aspect of imperfect connection between elements. Therefore, this paper presents the concept of application of...
-
Modal properties identification of a novel sandwich footbridge – Comparison of measured dynamic response and FEA
PublicationA modern sandwich composite footbridge made of high-tech materials, being an example of practical application of laminated composites in civil engineering, is presented. The in situ non-destructive testing of the footbridge, aiming to identify modal properties and pedestrian comfort, is described. The measured eigenmodes and eigenfrequencies are compared with numerically estimated values. Finite element analyses of the footbridge...
-
Macierzowa analiza konstrukcji prętowych w środowisku MATLAB®
PublicationNiniejsza książka poświęcona jest metodzie przemieszeń w ujęciu macierzowym, znanej także pod nazwą bezpośredniej lub komputerowej metody przemieszczeń. Podejście to jest szczególnym przypadkiem metody elementów skończonych (MES), która jest od wielu lat powszechnie stosowana w działalności inżynierskiej, w tym do analizowania różnorodnych problemów mechaniki. Metoda przemieszczeń jest dedykowana rozwiązywaniu układów prętowych....
-
Lamb wave-based monitoring of shear failure of an adhesive lap joint
PublicationThe paper presents a study on the elastic wave propagation in adhesive joints of steel plates subjected to tensile loading. A single lap joint was chosen for analysis because of its simplicity and plurality of applications. Experimental investigations consisted of the uniaxial extension of prepared specimens. Force and displacement values were recorded by a testing machine. Simultaneously, guided Lamb waves were excited and signals...
-
Lamb wave propagation in a single lap adhesive joint
PublicationThe aim of the paper is the analysis of Lamb wave propagation in adhesive joints. The research was performed on a single lap adhesive joint of two steel plates. Two types of joints, namely an intact and with defect were considered. In experimental investigations the condition assessment of the joint was performed with the use of antisymmetric Lamb waves excited by a plate piezo actuators and measured by a laser vibrometer. Numeri-cal...
-
Identyfikacja prędkości fali elektromagnetycznej w przegrodach budowlanych diagnozowanych metodą georadarową
PublicationPraca jest poświęcona metodzie identyfikacji prędkości fali elek-tromagnetycznej na podstawie analiz dyfrakcji spowodowanych obecnością inkluzji w przegrodach budowlanych żelbetowych, ceglanych oraz zespolonych żelbetowo-ceglanych. Wyprowadzono trzy modele matematyczne opisujące dyfrakcje charakterystyczne dla inkluzji kołowej, pionowej inkluzji przy powierzchni skanowa-nia oraz granicy między dwoma ośrodkami, w którym jednym z...
Year 2022
-
Monitoring the fracture process of concrete during splitting using integrated ultrasonic coda wave interferometry, digital image correlation and X-ray micro-computed tomography
PublicationThe paper deals with the continuous-time monitoring of mechanical degradation in concrete cubes under splitting. A series of experiments performed with integrated coda wave interferometry (CWI) and digital image correlation (DIC), supported with X-ray micro-computed tomography (micro-CT) is reported. DIC and micro-CT techniques were used to characterize the fracture process in detail. CWI method was proved to be effective in the...
-
Modelling of Longitudinal Elastic Wave Propagation in a Steel Rod Using the Discrete Element Method
PublicationThe paper deals with the issue of modelling elastic wave propagation using the discrete element method (DEM). The case of a longitudinal wave in a rod with a circular cross-section was considered. A novel, complex algorithm consisting of the preparation of models and simulation of elastic waves was developed. A series of DEM models were prepared for simulations, differing in discretisation and material parameters. Additional calculations...
-
Internal imaging of concrete fracture based on elastic waves and ultrasound computed tomography
PublicationThe condition assessment of concrete structures belongs to the greatest challenges of non-destructive testing. Monitoring the fracture process of concrete and detecting cracks at the earliest possible stage is a vital aspect to ensure the safety of civil engineering objects. The use of ultrasound tomography enables imaging the internal structure of a tested element. This study aims at the visualization of fracture damage in concrete...
Year 2011
-
Modelowanie propagacji fal sprężystych w tarczy typu T w kontekście możliwości diagnostycznych
PublicationTematem pracy są symulacje przebiegu fal sprężystych w płaskiej tarczy o kształcie przypominającym literę T. Obliczenia wykonano, stosując metodę elementów spektralnych. Porównawcze rozwiązania numeryczne wykonane zostały dla tarczy nieuszkodzonej, jak również dla tarczy z wprowadzonym uszkodzeniem. Zadaniem rejestrowanych sygnałów czasowych przyspieszeń fal sprężystych jest próba wykrycia i zlokalizowania uszkodzenia. W pracy...
-
Modelling of in-plane wave propagation in a plate using spectral element method and Kane–Mindlin theory with application to damage detection
Publication -
Modelling of in-plane wave propagation in a plate using spectral element method and Kane-Mindlin theory with application to damage detection
PublicationThis paper presents results of experimental and numerical analyses of in-plane waves propagatingin a 5 mm-thick steel plate in the frequency range of 120-300 kHz. For such a thickness/frequency ratio,extensional waves reveal dispersive character. To model in-plane wave propagation taking into account thethickness-stretch effect, a novel 2D spectral element, based on the Kane-Mindlin theory, was formulated. Anapplication of in-plane...
Year 2013
-
MODELOWANIE NIEKTÓRYCH ODDZIAŁYWAŃ DYNAMICZNYCH NA KONSTRUKCJE TRYBUN OBIEKTÓW SPORTOWYCH
PublicationW artykule przedstawiono badania i symulacje numeryczne dotyczące modelowania oddziaływań dynamicznych od pojedynczego kibica i grupy kibiców tańczących specyficzny taniec „Labado”. Zakres prac obejmuje badania doświadczalne oraz rozwiązanie problemu odwrotnego identyfikacji dynamicznej funkcji obciążenia. Weryfikację poprawności funkcji obciążenia wykonano na przykładzie danych pomiarowych i numerycznych dla stadionu żużlowego...
-
Konkurs studencki budowy modeli mostów z papieru
PublicationW artykule przedstawiono relację ze studenckiego konkursu budowy mostów z papieru, który odbył się w Politechnice Gdańskiej. Konkurs wyKOMBinuj mOst bazuje na powszechnie dostępnym materiale, jakim jest papier typu brystol. Wybór papieru jako materiału inżynierskiego podyktowany jest faktem, iż analogia pomiędzy zachowaniem papieru i blachy stalowej umożliwia obserwację mechanizmów zniszczeń charakterystycznych dla konstrukcji...
-
Identyfikacja parametrów modalnych kładki dla pieszych przy użyciu wzbudzenia impulsowego
PublicationCelem niniejszej pracy jest analiza możliwości wzbudzania kładek dla pieszych przy użyciu młotka modalnego. W artykule przedstawiono identyfikację częstotliwości i postaci drgań własnych oraz współczynników tłumienia kładki dla pieszych za pomocą eksperymentalnej analizy modalnej a także porównanie wyników otrzymanych z badań eksperymentalnych z wynikami modelu numerycznego.
Year 2008
-
Modelling of wave propagation in spatial frame elements - numerical simulations and experimental works
PublicationW pracy porównano rozwiązania propagacji fal sprężystych w ośrodku typu belka Timoszenki, uzyskane na drodze eksperymentalnej i numerycznej. Do obliczeń numerycznych wykorzystano wielowęzłowe spektralne elementy skończone klasy C0.Omówiono algorytm całkowania po czasie i sformułowano wnioski dotyczące liczby węzłów na długość fali.
Year 2015
-
Metody diagnostyki ultradźwiękowej i ich zastosowania w betonowych obiektach mostowych
PublicationCelem pracy jest przedstawienie zalet metod diagnostyki ultradźwiękowej zastosowanych do oceny stanu technicznego betonowych elementów w konstrukcjach obiektów mostowych. W artkule została omówiona metoda przepuszczania, która wymaga obustronnego dostępu do badanego elementu oraz metoda młoteczkowa, w której badania są realizowane przy założeniu ograniczenia dostępu do elementu tylko do jednej jego strony. Realizacje badań diagnostycznych...
-
Metoda georadarowa w diagnostyce betonowych obiektów mostowych wzdłuż linii Pomorskiej Kolei Metropolitalnej w Gdańsku
PublicationW pracy przedstawiono badania doświadczalne metodą georadarową betonowych obiektów mostowych wzdłuż nowopowstałej linii Pomorskiej Kolei Metropolitalnej (PKM) w Gdańsku. Przedmiotem badań był wiadukt drogowy, ramowo łukowa oraz ramowa kładka dla pieszych. Pomiary wykonano za pomocą zestawu georadarowego Alladin z anteną o częstotliwości emitowanej fali równej 2 GHz. W artykule opisano także podstawy teoretyczne metody georadarowej...
-
Konkurs budowy mostów z papieru – wyKOMBinuj mOst 2015
PublicationW artykule opisano konkurs budowy mostów z papieru wyKOMBinuj mOst 2015 organizowany przez Koło Naukowe Mechaniki Budowli KOMBO działające na Wydziale Inżynierii Lądowej i Środowiska. Była to już ósma edycja tego ogólnopolskiego konkursu pod honorowym patronatem Jego Magnificencji Rektora Politechniki Gdańskiej, Dziekana Wydziału Inżynierii Lądowej i Środowiska, Prezydenta Miasta Gdańska, Akademii Młodych Uczonych PAN, Związku...
-
Kompozytowy most pieszo-rowerowy w kampusie Politechniki Gdańskiej – badania doświadczalne
PublicationW artykule przedstawiono wybrane badania doświadczalne kompozytowej kładki dla pieszych. Badaniu poddano zarówno segment walidacyjny będący wycinkiem pełnowymiarowe konstrukcji, jak również dźwigar o docelowej długości. Wykonano badania w zakresie obciążeń statycznych, jak również identyfikację parametrów dynamicznych z zastosowaniem testu wzbudzenia impulsowego.
-
Innowacyjny moduł ultradźwiękowy systemu monitoringu technicznego mostu podwieszonego w Rzeszowie
PublicationW artykule przedstawiono system monitoringu technicznego konstrukcji mostu podwieszonego nad rzeką Wisłok. System będzie wyposażony w dodatkowy moduł ultradźwiękowy umożliwiający śledzenie degradacji mechanicznej betonu w pylonie mostu. Wczesne wykrywanie stref mikropęknięć, przed pojawieniem się widocznych rys, umożliwia monitorowanie amplitud propagującej fali ultradźwiękowej oraz analizę sygnałów w dziedzinie częstotliwości.
-
Identification of dynamic parameters in the context of diagnostics of steel tank with different level of liquid.
PublicationThe paper presents an experimental study to identify the dynamic parameters of a water-filled tank model. The experimental modal analysis approach involving the excitation at one point of the structure and acquisition of vibra tions at selected points distri buted over the tank surface allowed to determine the resonance frequencies, mode shapes and damping ratios. The main aim of the research was to examine the influence of...
Year 2020
-
Interpolation methods in GPR tomographic imaging of linear and volume anomalies for cultural heritage diagnostics
PublicationThis paper presents results of a ground penetrating radar (GPR) survey conducted in St. Joseph’s Church in Gdańsk, Poland. The aim of the study was to produce tomographic imaging of a renovated floor as well as the objects buried under the floor to detect linear and volume inclusions. The assumed track spacing was meaningfully greater than the single signal spacing in each track, which induced the need for interpolation methods...
-
Integrated Application of GPR and Ultrasonic Testing in the Diagnostics of a Historical Floor
PublicationThe paper presents the results of integrated ground penetrating radar (GPR) and ultrasonic testing (UT) measurements conducted on a historical floor in St. Nicholas’ Church, Gdańsk, Poland. The described inspection was the first stage of the technical state assessment of the building. The aim of the study was the detection of underfloor air gaps, which were observed in a few trial pits. The condition of the ground under the floor...
Year 2005
-
Identyfikacja uszkodzeń płyt dwuwymiarową transformatą falkową eksperymentalnej postaci drgań
PublicationArtykuł poświęcony jest identyfikacji zniszczeń konstrukcji płytowych. Rozważano płytę z wprowadzonym defektem o powierzchni równej 2.4% powierzchni płyty i głębokości równej 25% jej grubości. Obliczono dwuwymiarową transformatę pierwszej postaci drgań wyznaczonej eksperymentalnie i numerycznie. Lokalizację defektu wskazuje lokalne ekstremum w przestrzennym rozkładzie modułów transformaty falkowej.
seen 10332 times