Publications
Filters
total: 3038
displaying 1000 best results Help
Catalog Publications
Year 2018
-
High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths
PublicationProvides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills...
-
Human Factors and Cognitive Engineering in Functional Safety Analysis
PublicationHuman factors and cognitive engineering are considered nowadays as important multidisciplinary domains that focus on improving the relations between humans, technology and systems to be supervised and operated. The industrial automation and control systems (IACS) in hazardous plants are increasingly computerized and perform various safety functions. These are usually designed and implemented according to the functional safety requirements....
-
Hybrid stepless distribution transformer with four-quadrant AC/DC/AC converter at low voltage side - simulation tests
PublicationThe article presents the work of the stepless hybrid distribution transformer (HT), as an alternative to the so far applied Automatic Voltage Regulator (AVR) solutions, used to control the voltage in the power system in terms of the fundamental harmonic. The HT is a combination of a conventional distribution transformer and an AC/DC/AC converter connected in series with the transformers secondary winding. In the work the basic...
-
Hybrid storage management system consisting of supercapacitors and AHI batteries
PublicationIn the article the hybrid storage, composed of Aqueous Hybrid Ion battery and supercapacitor was presented. The system was tested through simulation studies. The work also describes the construction and properties of the developed device meant to control the energy flow of the storage and a communication system for remote parameter supervision.
-
Ignacy Mościcki w numizmatyce i filatelistyce
PublicationPrzedstawiono działalność Ignacego Mościckiego jako naukowca i polityka, zilustrowaną medalami i walorami filatelistycznymi.
-
Impact of Low Switching-to-Fundamental Frequency Ratio on Predictive Current Control of PMSM: A simulation study
PublicationPredictive current control algorithms for permanent magnet synchronous (PMSM) drives rely on an assumption that within short intervals motor currents can be approximated with linear functions. This approximation may result either from discretizing the motor model or from simplifications applied to the continuous-time model. As the linear current approximation has been recognized as inaccurate in case when the drive operates with...
-
Improving voltage levels in low-voltage networks with distributed generation – case study
PublicationThe use of distributed generation in low-voltage networks may cause the voltage variation in them, within the wide range. In unfavourable circumstances, the voltage may reach unacceptable values. The paper presents the effect of distributed generation on voltage levels in a selected low-voltage rural distribution network in Poland. An analysis of possible methods for improving voltage levels in this network is conducted. The most...
-
Influence of vision measurement system spatial configuration on measurement uncertainty, based on the example of electric traction application
PublicationTechnical diagnostics plays a significant role in ensuring operational reliability of electrified rail transport. The most critical point in the transmission of electric energy to vehicles is the sliding contact of the current collector with the traction network. For this reason, work is currently being carried on new measuring methods, whose appliance allows for more complete diagnostics of the contact line and current collectors,...
-
Integrated functional safety and cyber security analysis
PublicationThe chapter is devoted some important issues of the functional safety analysis, in particular the safety integrity level (SIL) verification of safety functions to be implemented within the distributed control and protection systems with regard to security aspects. A method based on quantitative and qualitative information is proposed for the SIL (IEC 61508, 61511) verification with regard of the evaluation assurance levels (EAL)...
-
Kontrola stanu instalacji elektrycznych niskiego napięcia – przegląd postanowień normy PN-HD 60364-6:2016-07 w zakresie prób i pomiarów
PublicationW referacie zaprezentowano zasady wykonywania prób i pomiarów w instalacjach elektrycznych niskiego napięcia. Dokonano przeglądu postanowień normy PN-HD 60364-6:2016-07, dotyczącej sprawdzania instalacji, i ich porównania z postanowieniami zawartymi w normie PN-HD 60364-6:2008.
-
Krótka historia Sympozjum Historii Elektryki
PublicationPrzedstawiono historię dotychczasowych edycji Sympozjum Historia Elektryki. Pierwsze Sympozjum zostało zorganizowane w Gdańsku z inicjatywy Centralnej Komisji Historycznej Stowarzyszenia Elektryków Polskich. Było okazją do spotkania osób interesujących się historią z wyższych uczelni technicznych i przemysłu, ale również zajmujących się historią zawodowo. Sukces pierwszego spotkania spowodował, że stała się to cykliczna impreza,...
-
Kryteria doboru przewodu uziemiającego ograniczników przepięć w stacjach elektroenergetycznych WN
PublicationW artykule przedstawiono najważniejsze kryteria doboru przewodu uziemiającego ograniczników przepięć w stacjach elektroenergetycznych o napięciu 110 kV i wyższym. Rozważono narażenia cieplne przewodu uziemiającego i ich wpływ na dobór jego przekroju. Omówiono zasady izolowania tego przewodu, aby zapewnić poprawną rejestrację liczby zadziałań ogranicznika.
-
Kształcenie kompetencji społecznych inżynierów z wykorzystaniem e-technologii
PublicationKompetencje społeczne to jedne z najbardziej poszukiwanych umiejętności w połączeniu z wiedzą techniczną pośród pracodawców. Na uczelniach technicznych przedmioty humanistyczne częściej traktowane są marginalnie, niż jako szansa na współpracę ze studentami na zupełnie innej płaszczyźnie. Artykuł prezentuje doświadczenia autorki w kreowaniu kompetencji społecznych pośród inżynierów studiujących na II...
-
Machine Learning in Multi-Agent Systems using Associative Arrays
PublicationIn this paper, a new machine learning algorithm for multi-agent systems is introduced. The algorithm is based on associative arrays, thus it becomes less complex and more efficient substitute of artificial neural networks and Bayesian networks, which is confirmed by performance measurements. Implementation of machine learning algorithm in multi-agent system for aided design of selected control systems allowed to improve the performance...
-
Metoda diagnostyki łożysk na podstawie analizy przebiegów prądu i napięcia zasilającego silnik indukcyjny.
PublicationW niniejszej monografii przedstawiono oryginalne podejście i realizację diagnostyki łożysk silników indukcyjnych przy użyciu metody opartej na pomiarach i analizie iloczynu wartości chwilowych prądu i napięcia zasilającego maszyny. Uzyskane wyniki badań eksperymentalnych na obiektach rzeczywistych okazały się zbieżne z wynikami badań symulacyjnych i potwierdziły, że powstanie uszkodzeń łożysk w silniku skutkuje pojawieniem się...
-
Modal analysis of railway current collectors using Autodesk Inventor
PublicationThe paper presents the results of modal analysis of railway current collector type 160EC. In the first place, the analysis was carried out analytically for a simplified two lumped mass pantograph model. Then numerical analysis was conducted in the Autodesk Inventor (AI) on the prepared multibody model using the AI modal analysis algorithm, which is based on the finite element method (FEM). Model elements which are most relevant...
-
Monitoring of current collectors on the railway line
PublicationProper cooperation the current collectors and the overhead line is a pre-requisite for reliable and safe operation of railway transport. Instances of maladjustment and, in some cases, damage to the current collectors, occur between periodic inspections of the rolling stock. In order to detect such anomalies quickly, the test stand was developed, with the aim of monitoring the technical state of the current collectors under operating...
-
New concept and analysis of the multicell piezoelectric motor
PublicationThis work presents the design, modeling and tests of the prototype multicell piezoelectric motor (MPM). A new concept of the electromechanical structure of the considered prototype is based on three rotating-mode actuators. The electromechanical structure of each actuator has been considered as an independent one - referred to as a ”single cell” (single actuator). Combined three resonant actuators generate three traveling waves...
-
Non-proportional full-order Luenberger observers of induction motors
PublicationThe paper recapitulates recently conducted investigations of non-proportional Luenberger observers, applied to reconstruction of state variables of induction motors. Three structures of non-proportional observers are analyzed, a proportional-integral observer, modified integral observer and observer with integrators. Criteria for gain selection of the observer are described, classical ones based on poles, as well as additional,...
-
Novel analysis methods of dynamic properties for vehicle pantographs
PublicationTransmission of electrical energy from a catenary system to traction units must be safe and reliable especially for high speed trains. Modern pantographs have to meet these requirements. Pantographs are subjected to several forces acting on their structural elements. These forces come from pantograph drive, inertia forces, aerodynamic effects, vibration of traction units etc. Modern approach to static and dynamic analysis should...
-
Obserwator prędkości kątowej wirnika maszyny indukcyjnej klatkowej oparty na metodzie backstepping ze ślizgowymi funkcjami przełączającymi
PublicationW artykule przedstawiono strukturę obserwatora prędkości kątowej wirnika, która jest oparta na rozszerzonym modelu matematycznym maszyny indukcyjnej klatkowej. Funkcje stabilizujące obserwator uzyskano na podstawie metody backstepping. Ponadto zastosowano ślizgowe funkcje przełączające. Przedstawiono badania eksperymentalne.
-
OCENA MOŻLIWOŚCI ZASTOSOWANIA KLASYCZNEJ METODY WSKAŹNIKOWEJ DO BIEŻĄCEGO ZARZĄDZANIA ENERGIĄ
PublicationW artykule zaprezentowano możliwości zastosowania klasycznej metody wskaźnikowej do bieżącego zarzą- dzania energią. Wykazano mocne i słabe strony stosowania metod statycznych. Klasyczna analiza wskaźnikowa daje ograni- czone możliwości w zakresie wykrywania stanów alarmowych, co wynika przede wszystkim z niedostatku informacji o występujących związkach przyczynowo-skutkowych. Wielość wskaźników może stać się barierą w sprawnym...
-
Ochrona przeciwporażeniowa w urządzeniach przytorowych niskiego napięcia zelektryfikowanych linii kolejowych
PublicationW artykule przedstawiono zasady ochrony przeciwporażeniowej w instalacjach urządzeń pomocniczych niskiego napięcia, obsługujących zelektryfikowany szlak kolejowy. Ze względu na oddziaływanie sieci trakcyjnej DC 3 kV (zagrożenie porażeniem, prądami błądzącymi), szczególnej uwagi wymaga wybór układu sieci niskiego napięcia i środków ochrony przeciwporażeniowej, a także konfiguracja instalacji uziemiających. Rozważono system trakcji...
-
Optimal Components Design for Modified Z-Source Based IPT Approach
PublicationThis paper describes components estimation process for IPT approach based on Z-source network. Proposed model covers main parameters of the system and gives efficient way to evaluate optimal parameters for fixed switching frequency and distance.
-
Optimal Multivariable Control for Modified Z-source Based IPT
PublicationThis paper describes Z-source based inductive power transfer topologies control approaches. The goal of this work is a multi-variable control approach which involves a constant voltage/constant current control along with an optimal frequency control to obtain maximum efficiency. This control is applied to the wireless power transfer system based on a modified Z-source topology. The description of the control method along with simulation...
-
Pomiar impedancji pętli zwarciowej w obwodach chronionych wyłącznikami różnicowoprądowymi i w obwodach zasilanych z UPS
PublicationPrzedstawiono zasadę pomiaru impedancji pętli zwarciowej w instalacjach niskiego napięcia oraz omówiono jego specyfikę w obwodach chronionych wyłącznikami różnicowoprądowymi. Zaprezentowano specjalne metody pomiarowe, przeznaczone do obwodów z tymi wyłącznikami. Omówiono również problemy związane z wykonywaniem pomiaru impedancji pętli zwarciowej w obwodach zasilanych z UPS typu VFI.
-
Pomiar impedancji pętli zwarciowej w obwodach z wyłącznikami różnicowoprądowymi i w obwodach zasilanych z UPS
PublicationW referacie przedstawiono teoretyczne podstawy pomiaru impedancji pętli zwarciowej oraz główne czynniki wpływające na jego dokładność. Omówiono pomiar impedancji pętli zwarciowej w obwodach chronionych wyłącznikami różnicowoprądowymi i zwrócono uwagę na problem zbędnego ich wyzwalania podczas tego pomiaru. Zaprezentowano specjalne metody pomiarowe, przeznaczone do obwodów z wyłącznikami różnicowoprądowymi. Przedstawiono również...
-
Potential Application of Solar Energy Systems for Electrified Urban Transportation Systems
PublicationThe paper presents a novel approach toward the use of solar energy systems in public transportation. The concept of energy generation in PV systems for supplying a trolleybus transportation system is proposed for the city of Gdynia (Poland). The suggested way of energy production allows reducing the environmental harm impact of the municipal transportation system. Moreover, the proposed way of green energy use can be a more profitable...
-
Power Hardware-in-the-Loop Approach In Power System Development
PublicationThe main objective of the research is the verification of the Power Hardware-In-The-Loop (PHIL) approach in power system analysis and design. The premise of the article is that using PHIL approach the performance of the power system in steady and transient state conditions can be analysed in real power system conditions. Models of induction machine were developed and real time simulations were performed. Simulation variables were...
-
PROBLEMY WYKONYWANIA AUDYTÓW ENERGETYCZNYCH W OBIEKTACH PRZEMYSŁOWYCH
PublicationW artykule zestawiono informacje obejmujące ramy prawne wykonania audytów energetycznych w zakładach przemysłowych. Opisano główne założenia dokumentów formalnych, a także zinterpretowano kluczowe fragmenty. Odniesiono zapisy prawa do rzeczywistych możliwości ich zastosowania. Zamiarem autorów było, aby zamieszczone uwagi wskazywały najważniejsze problemy wykonywania audytów przemysłowych, z którymi spotyka się audytor. Dotyczy...
-
Program funkcjonalno-użytkowy i projekt budowlany na potrzeby realizacji projektu"Budowa stacji 220/110 kV Praga(Żerań) wraz z wprowadzeniem linii 220kV Miłosna-Mory" -koreferat
PublicationDokonano oceny PF-U i projektu budowlanego Stacji 220/11- kV Praga na podstawie ok.1000str.dokumentacji projektowej
-
Program funkcjonalno-użytkowy na potrzeby realizacji projektu "Rozbudowa i modernizacja stacji Rzeszów "- koreferat
PublicationDokonano oceny PF-U projektu rozbudowy i modernizacji Stacji Rzeszów na podstawie dokumentacji projektowej -ok.600stron
-
Prowadzenie ruchu małego źródła kogeneracji gazowej według kryterium efektu ekonomicznego
PublicationCechą charakterystyczną źródeł gazowych jest ich duża elastyczność ruchowa, w porównaniu do większości źródeł konwencjonalnych i odnawialnych. Cecha ta może i powinna być wykorzystywana do poprawy wskaźników ekonomicznych obiektu. W tym celu należy przeanalizować możliwości jakie daje prowadzenie ruchu źródeł nie w standardzie pracy z wymuszeniem zapotrzebowania na ciepło, ale właśnie maksymalnie wykorzystując elastyczność ruchową...
-
Prowadzenie ruchu małej elektrociepłowni gazowej według kryterium efektu ekonomicznego
PublicationCechą charakterystyczną źródeł gazowych jest ich duża elastyczność ruchowa, w porównaniu do większości źródeł konwencjonalnych i odnawialnych. Cecha ta może i powinna być wykorzystywana do poprawy wskaźników ekonomicznych obiektu. W tym celu należy przeanalizować możliwości jakie daje prowadzenie ruchu źródeł nie w standardzie pracy z wymuszeniem zapotrzebowania na ciepło, ale właśnie maksymalnie wykorzystując elastyczność ruchową...
-
Przyrząd wirtualny do szacowania niepewności pomiaru mocy chwilowej.
PublicationW artykule przedstawiono zagadnienie dotyczące wykorzystania przyrządu wirtualnego do szacowania niepewności pomiaru mocy chwilowej. Analiza dotyczy układu do diagnostyki łożysk tocznych, składającego się z przetworników: napięcia oraz prąd-napięcie, który wykorzystano do badań diagnostycznych łożysk silników indukcyjnych metodą, opartą na pomiarze i analizie sygnałów napięcia i prądu pobieranych przez maszynę. Zaprezentowano opracowany...
-
Radioisotope measurement of selected parameters of liquid-gas flow using single detector system
PublicationTo determine the parameters of two-phase flows using radioisotopes, usually two detectors are used. Knowing the distance between them, the velocity of the dispersed phase is calculated based on time delay estimation. Such a measurement system requires the use of two gamma-ray sealed sources. But in some situations it is also possible to determine velocity of dispersed phase using only one scintillation probe and one gamma-ray source....
-
Radioisotope measurements of the liquid-gas flow in the horizontal pipeline using phase method
PublicationThe paper presents application of the gamma-absorption method to a two-phase liquid-gas flow investigation in a horizontal pipeline. The water-air mixture was examined by a set of two Am-241 radioactive sources and two NaI(Tl) scintillation probes. For analysis of the electrical signals obtained from detectors the cross-spectral density function (CSDF) was applied. Results of the gas phase average velocity measurements for CSDF...
-
Redesign of the Research Platform for Monitoring, Control and Security of Critical Infrastructure Systems
PublicationCritical Infrastructure Systems (CISs) play a key role in modern societies. Their sustainable operation depends heavily on the performance of dedicated structures and algorithms targeting monitoring, control and security aspects. In previous work a Research Platform (RP) for the design and simulation of such systems was presented. This works updates the information on the RP through the description of major hardware and software...
-
Regulacje prawne w branży gazowniczej
Publicationprzedstawiono aspekty wybrane regulacji prawnych w branży gazowniczej
-
Rozwiązania V2G I G2V jako sposoby wykorzystania samochodów elektrycznych do zmiany kształtu krzywej obciążenia dobowego systemu elektroenergetycznego
PublicationNiniejszy artykuł przedstawia wpływ zastosowania rozwiązania G2V oraz V2G na Krajowy System Elektroenergetyczny. Przedstawiono zmiany, jakie mogą zachodzić w kształcie krzywej obciążenia dobowego w zależności od wybranego scenariusza. Strategia G2V pozwala przede wszystkim na zrealizowanie tzw. „wypełniania dolin” czyli zwiększenia obciążenia w okresie doliny nocnej poprzez proces ładowania większej liczby pojazdów w tym okresie....
-
Safety integrity level verification for safety-related functions with security aspects
PublicationThe article is devoted some important issues of the functional safety analysis, in particular the safetyintegrity level (SIL) verification of safety functions to be implemented within the distributed controland protection systems with regard to cyber security aspects. The procedure for functional safety man-agement includes hazard identification, risk analysis and assessment, specification of overall safetyrequirements and definition...
-
Safety Integrity Verification Issues of the Control Systems for Industrial Process Plants
PublicationThe aim of this article is to identify and discuss some issues that can be encountered in designing the industrial automation and control systems (IACS) for implementing safety functions. In a functional safety standard IEC 61511 for the process industry such systems are named the basic process control systems (BPCS) and the safety instrumented systems (SIS). In a generic functional safety standard IEC 61508 they are depicted as...
-
Selection of AHI + SC Hybrid Storage Based on Mathematical Models and Load Variation Characteristics
PublicationThe article deals with the design of a hybrid storage consisting of Aqueous Hybrid Ion battery (AHI) and supercapacitor (SC) modules. The selection of components is based on the knowledge of the load profile of the storage and the AHI battery and supercapacitor models. The paper presents the method of selecting components of the storage made of AHI batteries and supercapacitor modules The article includes an example of the hybrid...
-
Simulation of the Dynamics of Renewable Energy Sources with Energy Storage Systems
PublicationThe intermittency of renewable energy sources (RES) constitutes a challenge for effective power system control. Fossil-fuel-based units offering ancillary power services to meet the short-term power imbalance are a financial and environmental burden for the society. Energy storage systems (ESS) can be the solution in view of the electricity market development and growing environmental concern. The major questions are, in what circumstances...
-
SMART GRID TECHNOLOGIES IN ELECTRIC POWER SUPPLY SYSTEMS OF PUBLIC TRANSPORT
PublicationNowadays the issue of electric energy saving in public transport is becoming a key area of interest which is connected both with a growth in environmental awareness of the society and an increase in the prices of fuel and electricity. It can be achieved by improving the usage of regenerative breaking. In 2016 the Przedsiębiorstwo Komunikacji Trolejbusowej (PKT, Trolleybus Transport Company) in Gdynia began practical implementation...
-
Solving the Problem of Dynamic Adaptability of Artificial Intelligence Systems that Control Dynamic Technical Objects
PublicationThis paper investigates the increase in the response speed and stability of artificial intelligence systems that control dynamic technical objects. The problem of calculating the optimal time of switching an artificial intelligence system between software classes by the criterion of the rigidity degree of the model of a control object is considered. The solution of this problem is proposed for the general case of the control object...
-
Sprawdzanie instalacji niskiego napięcia – przegląd postanowień normy PN-HD 60364-6:2016
PublicationPrzedstawiono zasady wykonywania prób i pomiarów w instalacjach elektrycznych niskiego napięcia. Dokonano przeglądu postanowień normy PN-HD 60364-6:2016-07, dotyczącej sprawdzania instalacji, i zwrócono uwagę na zmiany przez nią wprowadzone.
-
Stabilność systemu elektroenergetycznego
PublicationKsiążka na 900 stronach prezentuje w sposób dogłębny zagadnienia związane ze stabilnością systemów elektroenergetycznych.
-
STEROWANIE I MONITOROWANIE SIECI WYDZIELONEJ Z ODNAWIALNYMI ŹRÓDŁAMI ENERGII
PublicationW artykule przedstawiono zagadnienia związane z opracowaniem dedykowanego oprogramowania systemu sterowania i monitorowania odnawialnymi źródłami energii w sieci wydzielonej. Do implementacji systemu wykorzystano stanowisko laboratorium Systemów Sterowania w Energetyce Odnawialnej Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej. Opracowane oprogramowanie wykorzystuje platformę Windows Presentation Foundation oraz wzorzec...
-
Supporting Gastroesophageal Reflux Disease Diagnostics by Using Wavelet Analysis in Esophageal pH-Metry
PublicationThis paper presents a new approach to computer supported esophageal pH-metry measurement analysis performed in order to diagnose gastroesophageal reflux disease. In this approach wavelet analysis was used to analyse the esophageal pH-metry course. The research was performed on three groups of pH-metry courses: whole 24-hour pH-metry course, sleep only pH-metry course and 20 minutes after the end of a meal pH-metry course. After...