Publications
Filters
total: 6560
displaying 1000 best results Help
Catalog Publications
Year 2023
-
Chromium (III) removal by perennial emerging macrophytes in floating treatment wetlands
PublicationFloating treatment wetlands (FTWs) are a sustainable solution to treat polluted water, but their role in chromium (Cr(III)) removal under neutral pH conditions remains poorly understood. This study evaluated the potential of FTWs planted with two perennial emergent macrophytes, Phragmites australis and Iris pseudacorus, to remove Cr(III) and nutrients (N and PO4-P) from water containing 7.5 mg/L TN, 1.8 mg/L PO4-P, and Cr(III)...
-
Closing the loop: Upcycling secondary waste materials into nanoarchitectured carbon composites for the electrochemical degradation of pharmaceuticals
PublicationIn this study, we demonstrated the application of electrochemical oxidation as a safer and cleaner technology for minimizing the impact of pharmaceuticals in wastewaters, simultaneously mediated by upcycled secondary waste materials (SWMs)-derived electrodes, to further reduce their environmental impact. The modularity, scalability, ease of operation and reliability make electrochemical oxidation an ideal process for the destruction...
-
Coda wave interferometry in monitoring the fracture process of concrete beams under bending test
PublicationEarly detection of damage is necessary for the safe and reliable use of civil engineering structures made of concrete. Recently, the identification of micro-cracks in concrete has become an area of growing interest, especially using wave-based techniques. In this paper, a non-destructive testing approach for the characterization of the fracture process was presented. Experimental tests were made on concrete beams subjected to mechanical...
-
Combination of homogeneous liquid–liquid extraction and vortex assisted dispersive liquid–liquid microextraction for the extraction and analysis of ochratoxin A in dried fruit samples: Central composite design optimization
PublicationThis paper presents a new analytical procedure based on combination of homogeneous liquid–liquid extraction (HLLE) and vortex-assisted dispersive liquid–liquid microextraction (VA-DLLME) for the accurate and reliable determination of ochratoxin A (OTA) in dried fruit samples. To enable selective extraction of the OTA, six hydrophobic deep eutectic solvents (hDESs) were prepared and tested as extraction solvents. Optimization of...
-
Combination of terrestrial laser scanning and UAV photogrammetry for 3D modelling and degradation assessment of heritage building based on a lighting analysis: case study—St. Adalbert Church in Gdansk, Poland
PublicationThe construction of the St. Adalbert Church in Gdansk dates to 1310. It is a church of rich history and great historical value, and its care is challenging. In this study, the combination of unmanned aerial vehicle (UAV) photogrammetry and terrestrial laser scanning (TLS) was used to accurately build a 3D model of the church. Together with the collected historical inventory documentation, the historic building information model...
-
COMMENTS ON EXISTING ANALYTICAL SOLUTIONS TO THE WAVE-INDUCED CYCLIC RESPONSE OF A POROUS SEABED OF INFINITE THICKNESS
PublicationThis paper deals with the wave-induced cyclic response of a porous seabed (by means of oscillating parameters: pore-fluid pressure, soil displacement components, effective normal stress and shear stress components) due to a surface sinusoidal water-wave propagating over a seabed of infinite thickness. The main existing analytical solutions to the governing problem are critically discussed, pointing out their meaningful errors and...
-
Comparative Analysis of Unmanned Aerial Vehicles Used in Photogrammetric Surveys
PublicationThere are many manufacturers on the market offering various types of Unmanned Aerial Vehicles (UAV). The multitude of drones available on the market means that the choice of a UAV for a specific application appears to be a decision problem to be solved. The aim of this article is a comparative analysis of drones used in photogrammetric surveys. The criteria for evaluating the UAVs were: availability and product support, payload...
-
Comparative tests of the wall thickness effect of a glass-reinforced thermosetting plastic coating with a non-circular cross section in a soil-coating object for economic aspect
PublicationCulvert structures made of plastics are employed extensively in the construction of new facilities as well as the renovation of existing ones. Due to the high costs of materials required for the manufacturing of these goods, the objective of this research is focused to lessen the thickness of the walls, which may, on the other hand, result in a reduction in the stiffness of the system. In the course of the testing, the structure...
-
Compatibility of Crude Oil Blends─Processing Issues Related to Asphaltene Precipitation, Methods of Instability Prediction─A Review
PublicationProcessing crude oil of variable composition, especially due to the need to process crude oil blends obtained from various sources, presents a tremendous process challenge. This is mainly due to the destabilization of the colloidal system manifested mostly by the precipitation of the asphaltene fraction. The precipitation of asphaltenes from crude oil is a serious problem during extraction, transport, and processing. In the latter...
-
Computational Complexity and Its Influence on Predictive Capabilities of Machine Learning Models for Concrete Mix Design
PublicationThe design of concrete mixtures is crucial in concrete technology, aiming to produce concrete that meets specific quality and performance criteria. Modern standards require not only strength but also eco-friendliness and production efficiency. Based on the Three Equation Method, conventional mix design methods involve analytical and laboratory procedures but are insufficient for contemporary concrete technology, leading to overengineering...
-
Concept of an Innovative System for Dimensioning and Predicting Changes in the Coastal Zone Topography Using UAVs and USVs (4DBatMap System)
PublicationThis publication is aimed at developing a concept of an innovative system for dimensioning and predicting changes in the coastal zone topography using Unmanned Aerial Vehicles (UAVs) and Unmanned Surface Vehicles (USVs). The 4DBatMap system will consist of four components: 1. Measurement data acquisition module. Bathymetric and photogrammetric measurements will be carried out with a specific frequency in the coastal zone using...
-
Crack Resistance of Asphalt Concrete Subjected to Environmental Factors
PublicationThe paper presents an analysis of the influence of environmental factors on the cracking susceptibility of asphalt concrete resulting in a change in the durability of asphalt pavement. In order to assess the phenomenon, laboratory tests were carried out taking into account the destructive effects of moisture, freeze-thaw cycle and long-term ageing. The influence of both factors occurring simultaneously was also verified. Due to...
-
Cu( II ) ions removal from wastewater using starch nanoparticles ( SNPs ): An Eco‐sustainable approach
PublicationThe complex structured starch particles were reduced to the nanoscale size range through hydrolysis utilizing low concentration acid assisted with ultrasound irradiation. The synthesized starch nanoparticles (SNPs) were characterized by TEM, FTIR, and XRD techniques. The synthesized SNPs possessed surface activated entities, as many cationic functional groups were confirmed through the FTIR spectrum. Also, these SNPs were effectively...
-
Debonding of coin-shaped osseointegrated implants: Coupling of experimental and numerical approaches
PublicationWhile cementless implants are now widely used clinically, implant debonding still occur and is difficult to anticipate. Assessing the biomechanical strength of the bone–implant interface can help improving the understanding of osseointegration phenomena and thus preventing surgical failures. A dedicated and standardized implant model was considered. The samples were tested using a mode III cleavage device to assess the mechanical...
-
Deep eutectic solvents – Ideal solution for clean air or hidden danger?
PublicationThe industrial sector is one of the fastest-growing sources of greenhouse gases, due to its excessive energy consumption to meet the rapidly growing demand for energy-intensive products. The use of deep eutectic solvents (DESs) has been studied extensively in order to cope with these harmful gases, but their usage can be an issue in respect to ecological reasons. Do deep eutectic solvents harm the atmosphere? Yes, these solvents...
-
Deformation of an elastic second gradient spherical body under equatorial line density of dead forces
PublicationWe consider deformations of an elastic body having initially a spherical shape. Assumed deformation energy depends on the first and second gradient of displacements. We apply an equatorial line density of dead loads, that are forces per unit line length directed in radial direction and applied along the equator of the sphere. We restrict ourselves our analysis to the case of linearized second strain gradient isotropic elasticity...
-
Degradation of bisphenol S – a contaminant of emerging concern - by synergistic ozone and percarbonate based AOP
PublicationDegradation of bisphenol S was studied using ozone activated by sodium percarbonate and the effectiveness of optimized process was compared with the peroxone process. The influence of several factors including sodium percarbonate concentration, ozone dose, pH, and water matrix were investigated. A synergetic coefficient of 3.84 was achieved for the combination of sodium percarbonate and ozone, confirming the effectiveness of this...
-
Degradation of cefadroxil drug by newly designed solar light responsive alcoholic template-based lanthanum ferrite nanoparticles
PublicationIn this work, lanthanum ferrite nanoparticles were synthesized via a simple co-precipitation method. Two different templates, namely sorbitol and mannitol, were used in this synthesis to tune the optical, structural, morphological, and photocatalytic properties of lanthanum ferrite. The synthesized lanthanum ferrite-sorbitol (LFOCo-So) and lanthanum ferrite-mannitol (LFOCo-Mo) were investigated through Ultraviolet–Visible (UV–Vis),...
-
Degradation of Rhodamine dyes by Advanced Oxidation Processes (AOPs) – Focus on cavitation and photocatalysis - A critical review
PublicationThis review evaluates selected advanced oxidation processes (AOPs) - cavitation and photocatalysis - successfully used for wastewater treatment towards degradation of Rhodamine (Rh) dyes. Reactor configuration and impact of process parameters and oxidants addition (hydrogen peroxide, ozone, persulfates) on degradation effectiveness along with degradation mechanisms are discussed. Best technologies provide 100% degradation within...
-
DEM Analyses of Interface Behaviour Between Cohesionless Sand and Rigid Wall of Different Roughness
PublicationArtykuł dotyczy trójwymiarowych symulacji numerycznych quasi-statycznego ścinania między niespoistym piaskiem a sztywnymi ścianami w aparacie bezpośredniego ścinania ścian. Chropowatość ścian sztywnych wahała się od gładkiej do bardzo szorstkiej. Na górną ścianę działało stałe ciśnienie normalne. Symulacje numeryczne przeprowadzono metodą elementów dyskretnych (DEM). Ziarna piasku opisywano jako kulki z momentami kontaktowymi...
-
Design and Preparation of Magnetically-Oriented Poly(styr-co-MMA)-3MPS Capped Fe(ZnO) Hybrid Microspheres for Ion Exchange Removal of Toxic Pollutants from Wastewater
PublicationIn this work, polymeric microspheres derived from polystyrene-co-methyl methacrylate embedded with magnetic ZnO nanoparticles (poly(styrene-co-MMA)-3MPS-Fe (ZnO)) were synthesized using the suspension polymerization method. The surfaces of polymeric Fe(ZnO) microspheres were improved by functionalization with amino and sulphonate groups. The physicochemical analysis indicated a large number of positively charged (anion exchange)...
-
Design of metamaterials: Preface
PublicationThis special issue “Design of metamaterials” collects several papers that have presented theoretical, numerical, and experimental studies of metamaterials.
-
Determination of equivalent axle load factors with the use of strain energy of distortion
PublicationThe paper proposes a new method for calculation of equivalent axle load factors based on the analysis of strain energy of distortion induced in road pavements by traffic loads. The main advantage of the method is the more accurate calculation of the effects of multiple axles and super single versus dual tyres. The methodconsiders the location of critical points, at which strain energy of distortion reaches extreme values. When...
-
Development and application of asphalt binder relaxation test in different dynamic shear rheometers
PublicationIn this study, a novel relaxation test is proposed to evaluate asphalt binder low temperature properties using a Dynamic Shear Rheometer (DSR) with parallel plates of 4 mm in diameter. Three rheometers from three different manufacturers are used to analyze seven asphalt binders. Different material parameters are derived which are useful to evaluate and discriminate different asphalt binders. Test results of all three instruments...
-
Development and validation of lumbar spine finite element model
PublicationThe functional biomechanics of the lumbar spine have been better understood by finite element method (FEM) simulations. However, there are still areas where the behavior of soft tissues can be better modeled or described in a different way. The purpose of this research is to develop and validate a lumbar spine section intended for biomechanical research. A FE model of the 50th percentile adult male (AM) Total Human Model for Safety...
-
Development of a simple biogas analyzer module (BAM) for real-time biogas production monitoring
PublicationAnaerobic digestion (AD) relies on the cooperation of specific microbial communities, making it susceptible to process disruptions that could impact biogas production. In this regard, this study presents a technological solution based on the Arduino platform, in the form of a simple online monitoring system that can track the produced biogas profile, named as biogas analyzer module (BAM). The applicability of the BAM focused on...
-
Diagnostyka cienkościennych żelbetowych sklepień kolebkowych w budynku zabytkowym. Część II
PublicationW artykule przedstawiono opis oraz wyniki oceny stanu technicznego konstrukcji przekrycia Hali Głównej Dworca Kolejowego Gdańsk Główny. Ze względu na prowadzone prace związane z remontem kapitalnym Dworca Głównego PKP w Gdań- sku zaistniała konieczność przeprowadzenia rewitalizacji poddasza Hali Głównej, obejmująca między innymi jego termomodernizację (ocieplenie wysklepek) oraz zabezpieczenie elementów wiązarów dachowych przed...
-
Diagnostyka i naprawy dylatacji konstrukcyjnych w płytach posadzkowych. Część II
PublicationW artykule przedstawiono najczęściej spotykane uszkodzenia dylatacji konstrukcyjnych w płytach posadzkowych na gruncie wraz z omówieniem sposobów naprawy. Dylatacje konstrukcyjne w płytach posadzkowych najczęściej realizowane są z wykorzystaniem dylatacji systemowych, które w trakcie dłu- goletniej eksploatacji ulegają naturalnemu zużyciu lub uszkodze- niom mechanicznym. W artykule omówiono istotne aspekty tech- nologiczno-materiałowe...
-
Diagnostyka, naprawy i wzmacnianie elementów żelbetowych uszkodoznych w następstwie skurczu
PublicationW artykule opsano wpływ zjawisk reologicznych: skurczu i pełzania na wytężenie i zarysowanie żelbetowych elementów konstrukcyjnych
-
Direct design of Controlled Modulus Columns (CMC) based on in-situ testing
PublicationIn this paper, the serviceability limit state and bearing capacity of tension screw displacement piles were analyzed using the results of static pile load tests, carried out on the test plot near the Elbląg city, and field, and laboratory tests. The paper presents the methodology of determining the pile load-settlement curve using different types of t-z transfer functions. The new method of constructing the pile load-settlement...
-
Diving boldly into COVID‐19 contaminated wastewater: Eyes at nanotechnology‐assisted solutions
PublicationSeveral studies have been directed to find scalable, swift, accurate, and cost-effective strategies for detecting, monitoring, and treating coronavirus disease 2019 (COVID-19). Indeed, the lack of a fast and practical method for detecting the infected regions makes decision-making challenging to combat the critical pandemic-struck situations. The probable ‘wrong’, or rather inadequate, decisions not only have a boomerang effect...
-
Edible Lepidoptera as human foods – a comprehensive review
PublicationAs the global population continues to grow, traditional protein sources like meat and fish are becoming increasingly unsustainable due to their environmental impact. Edible insects, on the other hand, are highly nutritious, require minimal resources to produce, and emit significantly fewer greenhouse gases than traditional livestock. Lepidoptera, one of the most diverse insect orders, contains some popular edible species that have...
-
Editorial, SI EATA2023
PublicationThe European Asphalt Technology Association (EATA) is an organisation of leading European engineers and scientists involved in the asphalt material research. Every two years, the EATA celebrates its international pavement conference, with the aim of disseminating the key advances in scientific knowledge related to asphalt materials and technologies, and to encourage the transfer and application of this knowledge worldwide. Since...
-
Efektywność skrępowania betonu w grubościennych słupach typu Concrete-Filled Steel Tube o przekroju kołowym
PublicationW słupach typu CFST w stanie granicznym dochodzi do zwiększenia wytrzymałości betonu rdzenia na skutek jego skrępowania. Zaistnienie tego zjawiska zależy od wielu czynników. Jednym z najważniejszych z nich jest sztywność obwodowa płaszcza stalowego. Jej wpływ na efektywność wzrostu wytrzymałości betonu rdzenia przebadano eksperymentalnie na grupie 48 grubościennych słupów CFST. Wykazano, że nadmierne zwiększanie grubości płaszcza...
-
Effect of soil on the capacity of viscous dampers between adjacent buildings
PublicationThis study investigated the seismic pounding of two adjacent buildings considering soil–structure interaction (SSI). A comprehensive parametric study of buildings with different heights was performed to reveal the pounding-involved behaviour considering the soil effect. Wavelet transform has been conducted to gain insight into the differences in the frequency contents of the impact forces between fixed- and flexible-base adjacent...
-
Effective assessment of biopolymer-based multifunctional sorbents for the remediation of environmentally hazardous contaminants from aqueous solutions
PublicationPersistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective...
-
Effective Equations for the Optimum Seismic Gap Preventing Earthquake-Induced Pounding between Adjacent Buildings Founded on Different Soil Types
PublicationThe best approach to avoid collisions between adjacent structures during earthquakes is to provide sufficient spacing between them. However, the existing formulas for calculating the optimum seismic gap preventing pounding were found to provide inaccurate results upon the consideration of different soil types. The aim of this paper is to propose new equations for the evaluation of the sufficient in-between separation gap for buildings...
-
Effectiveness of various types of coating materials applied in reinforced concrete exposed to freeze–thaw cycles and chlorides
PublicationThis study assesses the durability of coated and uncoated concrete surfaces protected with four Different coating materials: water-soluble (BW), solvent-based (BR), mineral (MI), and epoxy (EP). The durability assessment includes evaluating the absorption rate of water, pull-of adhesion strength, and coating material thickness. Concrete samples were subjected to immersion in regular water and a 7% urea solution, followed by cyclic...
-
Effects of Deck-Abutment Pounding on the Seismic Fragility Curves of Box-Girder Highway Bridges
PublicationEarthquake-induced pounding in bridges is a complex contact phenomenon in which the dynamic responses of structures, including collisions between deck and abutments, are strongly related to structural properties and earthquake excitation. The goal of this study is to develop and compare the seismic fragility curves of overall system and individual components of regular and irregular box-girder highway bridges in two cases: with...
-
Effects of the Covid-19 travel restrictions on metropolises mobility: empirical evidence from the Tricity metropolis (Poland)
PublicationThis paper aims to assess changes in mobility and modal shift caused by COVID-19 travel restrictions among the residents of Gdańsk Bay Metropolis (Poland). Measurement’s moments were assumed in periods differing in the level of restric- tions. The computer-assisted telephone interview (CATI) was carried out in November and December 2020. The results did not confirm the expected modal shift. However, significant changes in the number...
-
Ekspertyza dotycząca zdiagnozowania przyczyn przelewania się wody i powstania rozlewisk w systemie retencji w postaci ogrodów deszczowych na terenie osiedla ZDROVO, ul. Niepołomicka w Gdańsku
PublicationCelem ekspertyzy jest przedstawienie przyczyn przelewania się wody i powstawania rozlewisk w systemie retencji w postaci ogrodów deszczowych na terenie osiedla ZDROVO przy ul. Niepołomickiej w Gdańsku. Opracowanie zawiera analizę warunków gruntowo-wodnych, analizę przeprowadzonych...
-
Ekspertyza naukowo-techniczna dotycząca analizy i oceny rozwiązań projektowych oraz aspektów wykonawczych posadowienia na kolumnach przemieszczeniowych FDC budynku usługowo-apartamentowego przy ul. Bulwar Gdański 9 w Szczecinie
PublicationUstalenie przyczyn projektowych i wykonawczych wadliwej jakości kolumn fundamentowych do posadowienia budynku biurowo-mieszkalnego
-
Ekspertyza techniczna dotycząca przyczyn zawilgocenia ścian Katedry w Kwidzynie oraz wpływu zabudowy dwóch kwartałów mieszkalno-usługowych przy Katedrze realizowanych w latach 2010-2011 oraz 2018-2020 na stan zawilgocenia murów Katedry
PublicationPrzedmiotem opracowania jest ekspertyza dotycząca przyczyn zawilgocenia ścian Katedry pw. św. Jana Ewangelisty w Kwidzynie oraz wpływu zabudowy dwóch kwartałów mieszkalno-usługowych przy katedrze, zrealizowanych w latach 2010-2011 oraz 2018-2020 na stan zawilgocenia murów budynku katedry. Ekspertyza swoim zakresem obejmuje ocenę zawilgocenia murów oraz ścian na zewnątrz oraz wewnątrz katedry, jak również wskazuje potencjalne przyczyny...
-
Electrochemical Production of Sodium Hypochlorite from Salty Wastewater Using a Flow-by Porous Graphite Electrode
PublicationThe production of sodium hypochlorite (NaOCl) from salty wastewater using an electrochemical cell has several advantages over other methods that often require hazardous chemicals and generate toxic waste, being more sustainable and environmentally friendly. However, the process of producing sodium hypochlorite using an electrochemical cell requires careful control of the operating conditions, such as the current density, flow rate,...
-
Ellipticity in couple-stress elasticity
PublicationWe discuss ellipticity property within the linear couple-stress elasticity. In this theory, there exists a deformation energy density introduced as a function of strains and gradient of macrorotations, where the latter are expressed through displacements. So the couple-stress theory could be treated as a particular class of strain gradient elasticity. Within the micropolar elasticity, the model is called Cosserat pseudocontinuum...
-
Ellipticity of gradient poroelasticity
PublicationWe discuss the ellipticity properties of an enhanced model of poroelastic continua called dilatational strain gradient elasticity. Within the theory there exists a deformation energy density given as a function of strains and gradient of dilatation. We show that the equilibrium equations are elliptic in the sense of Douglis–Nirenberg. These conditions are more general than the ordinary and strong ellipticity but keep almost all...
-
Elucidation of chemical compounds in different extracts of two Lavandula taxa and their biological potentials: Walking with versatile agents on the road from nature to functional applications
PublicationDue to their health-promoting and nutraceutical properties, lavenders are frequently employed in the food and pharmaceutical industries. Here, we focused on investigate the chemical profile of hexane, MeOH, and water extracts of leaf, flower, and root of L. pedunculata and L. stoechas and to assess their antioxidant, enzyme inhibitory, and antibacterial properties. The highest total polyphenolic and flavonoids contents were recorded...
-
Emerging Processes for Sustainable Processing of Food Ingredients and Products
PublicationIn recent decades, traditional food processing processes, such as homogenization, pasteurization, canning, drying, and smoking, among others, have been successfully applied to obtain, to some extent, acceptable food items. However, with the increasing food demand, as a consequence of the growing population worldwide, new, tunable, and enriched food products are demanded, requiring the implementation of emerging technologies in...
-
Endothelial dysfunction due to eNOS uncoupling: molecular mechanisms as potential therapeutic targets
PublicationNitric oxide (NO) is one of the most important molecules released by endothelial cells, and its antiatherogenic properties support cardiovascular homeostasis. Diminished NO bioavailability is a common hallmark of endothelial dysfunction underlying the patho‑ genesis of the cardiovascular disease. Vascular NO is synthesized by endothelial nitric oxide synthase (eNOS) from the substrate L‑arginine (L‑Arg), with tetrahydrobiopterin...
-
Engineering boron and nitrogen codoped carbon nanoarchitectures to tailor molecularly imprinted polymers for PFOS determination
PublicationPer- and polyfluoroalkyl substances (PFAS) have gained significant attention as emerging contaminants due to their persistence, abundance, and adverse health effects. Consequently, the urgent need for ubiquitous and effective sensors capable of detecting and quantifying PFAS in complex environmental samples has become a priority. In this study, we present the development of an ultrasensitive molecularly imprinted polymer (MIP)...