Concrete temperature measurements of cubic specimens cured under isothermal and semi-adiabatic conditions - Open Research Data - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Concrete temperature measurements of cubic specimens cured under isothermal and semi-adiabatic conditions

Opis

The DataSet contains temperature measurements of concrete cubes (150 x 150 x 150 mm) cured under isothermal and semi-adiabatic conditions. The specimens were moulded from six types of concrete mixtures produced in the laboratory conditions. Mix #1: Portland cement CEM I 42.5R and gravel aggregate, mix #2: CEM I 42.5R and  basalt aggregate, mix#3: Portland-composite cement CEM II/B-M (S-V) 42.5 N contain silica fly ash and gravel aggregate, mix#4: CEM II/B-M (S-V) 42.5 N and basalt aggregate, mix #5: blast furnace slag cement CEM III/A 42.5N - LH/HSR/NA and gravel aggregate, mix #6: CEM III/A 42.5N - LH/HSR/NA and basalt aggregate.

The concrete cubes were casted in 150 mm polystyrene cubic moulds. For every mixture six cubes were formed, where three were dedicated to isothermal conditions and three were placed in specially prepared Styrofoam containers with 100 mm thick insulation layer. The boxes limited the heat exchange with the surrounding, thus samples could be cured in semi-adiabatic conditions. The original measurement system was applied for the registration of the thermal data for cubes cured under isothermal and semi-adiabatic conditions. The device consists of a central unit and water-proof, digital temperature sensors (DS18B20). Immediately after molding, the temperatures sensors were mounted in cubic centre and the concrete temperature changes were recorded every 5 minutes, thus during 7 days 2017 points of data were registered.

Each file consists of 8 columns. The file has (.txt) extension and contains: concrete temperature measurements for cubes cured under isothermal conditions (in oC, 1st – 3rd columns), concrete temperature measurements for cubes cured under semi-adiabatic conditions (in oC, 4th – 6th columns) and environment temperature measurements (in oC, 7th – 8th columns).

Plik z danymi badawczymi

Temperature_measurements.zip
63.2 kB, S3 ETag 3c0d63d75d8e61a47db7c0ab62905057-1, pobrań: 2
Hash pliku liczony jest ze wzoru
hexmd5(md5(part1)+md5(part2)+...)-{parts_count} gdzie pojedyncza część pliku jest wielkości 512 MB

Przykładowy skrypt do wyliczenia:
https://github.com/antespi/s3md5

Informacje szczegółowe o pliku

Licencja:
Creative Commons: by 4.0 otwiera się w nowej karcie
CC BY
Uznanie autorstwa
Embargo na plik:
2024-12-31
Dane surowe:
Dane zawarte w datasecie nie zostały w żaden sposób przetworzone.

Informacje szczegółowe

Rok publikacji:
2022
Data zatwierdzenia:
2022-11-16
Data wytworzenia:
2022
Język danych badawczych:
angielski
Dyscypliny:
  • Inżynieria lądowa i transport (Dziedzina nauk inżynieryjno-technicznych)
DOI:
Identyfikator DOI 10.34808/dbqv-3341 otwiera się w nowej karcie
Finansowanie:
Weryfikacja:
Politechnika Gdańska

Słowa kluczowe

Cytuj jako

Autorzy

wyświetlono 97 razy